Today's Message Index:
----------------------
1. 07:04 AM - LOM M332 fuel flow? (Jeayers1@aol.com)
Message 1
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | LOM M332 fuel flow? |
--> Lom-List message posted by: Jeayers1@aol.com
Hi All,
Just curious what power setting and fuel flow is normally used?
I changed from the manual mixture control to an automatic mixture control, and
don't have it set up properly. Running too rich based on the black exhaust.
I nomally cruise at 2400 RPM. Unfortunetly, I only remember that with 16.3" MP
(full throttle) at 17,500' (-4 degree C oat) the fuel flow was 5.5 gph. The
performance graphs indicate about 42 hp for between 3 to 3.5 gph.
I'll be getting some new numbers at lower altitudes in the next couple days.
Jim Ayers
RV-3 N47RV LOM M332A
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|