Today's Message Index:
----------------------
1. 05:52 AM - Re: 705-1000 manifold pressure regulator (AeroCraftsman)
2. 06:08 AM - Re: 705-1000 manifold pressure regulator (Stephen Beaver)
3. 06:35 AM - Re: 705-1000 manifold pressure regulator (AeroCraftsman)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: 705-1000 manifold pressure regulator |
Petr is who I deal with and he has always been very helpful.
Good luck with it,
Mark
Sent from the iPad at AeroCraftsman
On May 28, 2012, at 1:45 PM, Stephen Beaver <sbeaver@columbus.rr.com> wrote:
> Yes. I just emailed Petr Ppokop at LOM to see if he can help.
>
> My early 332B did not originally come with this device, but since it is in
tended to lean the mixture at low RPM, and mine seems to be overly rich, it s
eems worth a try.
>
> Steve
>
>
> From: AeroCraftsman <mark@aerocraftsman.com>
> Date: Monday, May 28, 2012 4:37 PM
> To: "lom-list@matronics.com" <lom-list@matronics.com>
> Subject: Re: Lom-List: 705-1000 manifold pressure regulator
>
> Stephen,
> Have you tried LOM directly? In my experience they have been very respons
ive and easy to deal with.
> Mark Lightsey
> M337C
> Caudron C.460 replica
>
> Sent from the iPad at AeroCraftsman
>
> On May 28, 2012, at 12:26 PM, Stephen Beaver <sbeaver@columbus.rr.com> wro
te:
>
>> Looking for a 705-1000 regulating valve assembly. This unit fits between t
he throttle butterfly and the fuel injection pump and is used to regulate th
e pressures sensed by the fuel injection pump.
>>
>> I would be grateful for any leads.
>>
>> Thanks,
>>
>> Steve
>>
>>
>>
>> =========================
=========
>> //www.matronics.com/Navigator?Lom-List
>> =========================
=========
>> cs.com
>> =========================
=========
>> matronics.com/contribution
>> =========================
=========
>>
>
>
> ww.matronics.com/Navigator?Lom-List
> com
> ronics.com/contribution
>
>
>
==========================
=========
==========================
=========
==========================
=========
==========================
=========
>
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: 705-1000 manifold pressure regulator |
Update.
It turns out the 705-1000 device is required for later engines only. The
M332Sc which I have has a needle valve built into the throttle housing which
serves the same purpose, so the regulator is neither needed or approved for
this engine.
Steve
From: AeroCraftsman <mark@aerocraftsman.com>
Subject: Re: Lom-List: 705-1000 manifold pressure regulator
Petr is who I deal with and he has always been very helpful.
Good luck with it,
Mark
Sent from the iPad at AeroCraftsman
On May 28, 2012, at 1:45 PM, Stephen Beaver <sbeaver@columbus.rr.com> wrote:
> Yes. I just emailed Petr Ppokop at LOM to see if he can help.
>
> My early 332B did not originally come with this device, but since it is
> intended to lean the mixture at low RPM, and mine seems to be overly rich, it
> seems worth a try.
>
> Steve
>
>
> From: AeroCraftsman <mark@aerocraftsman.com>
> Date: Monday, May 28, 2012 4:37 PM
> To: "lom-list@matronics.com" <lom-list@matronics.com>
> Subject: Re: Lom-List: 705-1000 manifold pressure regulator
>
> Stephen,
> Have you tried LOM directly? In my experience they have been very responsive
> and easy to deal with.
> Mark Lightsey
> M337C
> Caudron C.460 replica
>
> Sent from the iPad at AeroCraftsman
>
> On May 28, 2012, at 12:26 PM, Stephen Beaver <sbeaver@columbus.rr.com> wrote:
>
>> Looking for a 705-1000 regulating valve assembly. This unit fits between the
>> throttle butterfly and the fuel injection pump and is used to regulate the
>> pressures sensed by the fuel injection pump.
>>
>> I would be grateful for any leads.
>>
>> Thanks,
>>
>> Steve
>>
>>
>>
>> ==================================
>> //www.matronics.com/Navigator?Lom-List
>> ==================================
>> cs.com <http://cs.com>
>> ==================================
>> matronics.com/contribution <http://matronics.com/contribution>
>> ==================================
>>
> ww.matronics.com/Navigator?Lom-List
> <http://ww.matronics.com/Navigator?Lom-List>
> com
> ronics.com/contribution <http://ronics.com/contribution>
>
>
> ==================================
> //www.matronics.com/Navigator?Lom-List
> ==================================
> cs.com
> ==================================
> matronics.com/contribution
> ==================================
>
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: 705-1000 manifold pressure regulator |
Hopefully you'll be able to make the necessary adjustments using the needle v
alve assembly to cure the condition.
Mark
Sent from the iPad at AeroCraftsman
On May 30, 2012, at 6:08 AM, Stephen Beaver <sbeaver@columbus.rr.com> wrote:
> Update.
>
> It turns out the 705-1000 device is required for later engines only. The M
332Sc which I have has a needle valve built into the throttle housing which s
erves the same purpose, so the regulator is neither needed or approved for t
his engine.
>
> Steve
>
>
> From: AeroCraftsman <mark@aerocraftsman.com>
> Date: Wednesday, May 30, 2012 8:51 AM
> To: "lom-list@matronics.com" <lom-list@matronics.com>
> Subject: Re: Lom-List: 705-1000 manifold pressure regulator
>
> Petr is who I deal with and he has always been very helpful.
> Good luck with it,
> Mark
>
> Sent from the iPad at AeroCraftsman
>
> On May 28, 2012, at 1:45 PM, Stephen Beaver <sbeaver@columbus.rr.com> wrot
e:
>
>> Yes. I just emailed Petr Ppokop at LOM to see if he can help.
>>
>> My early 332B did not originally come with this device, but since it is i
ntended to lean the mixture at low RPM, and mine seems to be overly rich, it
seems worth a try.
>>
>> Steve
>>
>>
>> From: AeroCraftsman <mark@aerocraftsman.com>
>> Date: Monday, May 28, 2012 4:37 PM
>> To: "lom-list@matronics.com" <lom-list@matronics.com>
>> Subject: Re: Lom-List: 705-1000 manifold pressure regulator
>>
>> Stephen,
>> Have you tried LOM directly? In my experience they have been very respon
sive and easy to deal with.
>> Mark Lightsey
>> M337C
>> Caudron C.460 replica
>>
>> Sent from the iPad at AeroCraftsman
>>
>> On May 28, 2012, at 12:26 PM, Stephen Beaver <sbeaver@columbus.rr.com> wr
ote:
>>
>>> Looking for a 705-1000 regulating valve assembly. This unit fits between
the throttle butterfly and the fuel injection pump and is used to regulate t
he pressures sensed by the fuel injection pump.
>>>
>>> I would be grateful for any leads.
>>>
>>> Thanks,
>>>
>>> Steve
>>>
>>>
>>>
>>> ========================
>>> //www.matronics.com/Navigator?Lom-List
>>> ========================
>>> cs.com
>>> ========================
>>> matronics.com/contribution
>>> ========================
>>>
>> ww.matronics.com/Navigator?Lom-List
>> com
>> ronics.com/contribution
>>
>>
>> =========================
=========
>> //www.matronics.com/Navigator?Lom-List
>> =========================
=========
>> cs.com
>> =========================
=========
>> matronics.com/contribution
>> =========================
=========
>>
>
>
> ww.matronics.com/Navigator?Lom-List
> com
> ronics.com/contribution
>
>
>
==========================
=========
==========================
=========
==========================
=========
==========================
=========
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|