---------------------------------------------------------- Lom-List Digest Archive --- Total Messages Posted Wed 05/30/12: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:52 AM - Re: 705-1000 manifold pressure regulator (AeroCraftsman) 2. 06:08 AM - Re: 705-1000 manifold pressure regulator (Stephen Beaver) 3. 06:35 AM - Re: 705-1000 manifold pressure regulator (AeroCraftsman) ________________________________ Message 1 _____________________________________ Time: 05:52:07 AM PST US Subject: Re: Lom-List: 705-1000 manifold pressure regulator From: AeroCraftsman Petr is who I deal with and he has always been very helpful. Good luck with it, Mark Sent from the iPad at AeroCraftsman On May 28, 2012, at 1:45 PM, Stephen Beaver wrote: > Yes. I just emailed Petr Ppokop at LOM to see if he can help. > > My early 332B did not originally come with this device, but since it is in tended to lean the mixture at low RPM, and mine seems to be overly rich, it s eems worth a try. > > Steve > > > From: AeroCraftsman > Date: Monday, May 28, 2012 4:37 PM > To: "lom-list@matronics.com" > Subject: Re: Lom-List: 705-1000 manifold pressure regulator > > Stephen, > Have you tried LOM directly? In my experience they have been very respons ive and easy to deal with. > Mark Lightsey > M337C > Caudron C.460 replica > > Sent from the iPad at AeroCraftsman > > On May 28, 2012, at 12:26 PM, Stephen Beaver wro te: > >> Looking for a 705-1000 regulating valve assembly. This unit fits between t he throttle butterfly and the fuel injection pump and is used to regulate th e pressures sensed by the fuel injection pump. >> >> I would be grateful for any leads. >> >> Thanks, >> >> Steve >> >> >> >> ========================= ========= >> //www.matronics.com/Navigator?Lom-List >> ========================= ========= >> cs.com >> ========================= ========= >> matronics.com/contribution >> ========================= ========= >> > > > ww.matronics.com/Navigator?Lom-List > com > ronics.com/contribution > > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > ________________________________ Message 2 _____________________________________ Time: 06:08:26 AM PST US Subject: Re: Lom-List: 705-1000 manifold pressure regulator From: Stephen Beaver Update. It turns out the 705-1000 device is required for later engines only. The M332Sc which I have has a needle valve built into the throttle housing which serves the same purpose, so the regulator is neither needed or approved for this engine. Steve From: AeroCraftsman Subject: Re: Lom-List: 705-1000 manifold pressure regulator Petr is who I deal with and he has always been very helpful. Good luck with it, Mark Sent from the iPad at AeroCraftsman On May 28, 2012, at 1:45 PM, Stephen Beaver wrote: > Yes. I just emailed Petr Ppokop at LOM to see if he can help. > > My early 332B did not originally come with this device, but since it is > intended to lean the mixture at low RPM, and mine seems to be overly rich, it > seems worth a try. > > Steve > > > From: AeroCraftsman > Date: Monday, May 28, 2012 4:37 PM > To: "lom-list@matronics.com" > Subject: Re: Lom-List: 705-1000 manifold pressure regulator > > Stephen, > Have you tried LOM directly? In my experience they have been very responsive > and easy to deal with. > Mark Lightsey > M337C > Caudron C.460 replica > > Sent from the iPad at AeroCraftsman > > On May 28, 2012, at 12:26 PM, Stephen Beaver wrote: > >> Looking for a 705-1000 regulating valve assembly. This unit fits between the >> throttle butterfly and the fuel injection pump and is used to regulate the >> pressures sensed by the fuel injection pump. >> >> I would be grateful for any leads. >> >> Thanks, >> >> Steve >> >> >> >> ================================== >> //www.matronics.com/Navigator?Lom-List >> ================================== >> cs.com >> ================================== >> matronics.com/contribution >> ================================== >> > ww.matronics.com/Navigator?Lom-List > > com > ronics.com/contribution > > > ================================== > //www.matronics.com/Navigator?Lom-List > ================================== > cs.com > ================================== > matronics.com/contribution > ================================== > ________________________________ Message 3 _____________________________________ Time: 06:35:51 AM PST US Subject: Re: Lom-List: 705-1000 manifold pressure regulator From: AeroCraftsman Hopefully you'll be able to make the necessary adjustments using the needle v alve assembly to cure the condition. Mark Sent from the iPad at AeroCraftsman On May 30, 2012, at 6:08 AM, Stephen Beaver wrote: > Update. > > It turns out the 705-1000 device is required for later engines only. The M 332Sc which I have has a needle valve built into the throttle housing which s erves the same purpose, so the regulator is neither needed or approved for t his engine. > > Steve > > > From: AeroCraftsman > Date: Wednesday, May 30, 2012 8:51 AM > To: "lom-list@matronics.com" > Subject: Re: Lom-List: 705-1000 manifold pressure regulator > > Petr is who I deal with and he has always been very helpful. > Good luck with it, > Mark > > Sent from the iPad at AeroCraftsman > > On May 28, 2012, at 1:45 PM, Stephen Beaver wrot e: > >> Yes. I just emailed Petr Ppokop at LOM to see if he can help. >> >> My early 332B did not originally come with this device, but since it is i ntended to lean the mixture at low RPM, and mine seems to be overly rich, it seems worth a try. >> >> Steve >> >> >> From: AeroCraftsman >> Date: Monday, May 28, 2012 4:37 PM >> To: "lom-list@matronics.com" >> Subject: Re: Lom-List: 705-1000 manifold pressure regulator >> >> Stephen, >> Have you tried LOM directly? In my experience they have been very respon sive and easy to deal with. >> Mark Lightsey >> M337C >> Caudron C.460 replica >> >> Sent from the iPad at AeroCraftsman >> >> On May 28, 2012, at 12:26 PM, Stephen Beaver wr ote: >> >>> Looking for a 705-1000 regulating valve assembly. This unit fits between the throttle butterfly and the fuel injection pump and is used to regulate t he pressures sensed by the fuel injection pump. >>> >>> I would be grateful for any leads. >>> >>> Thanks, >>> >>> Steve >>> >>> >>> >>> ======================== >>> //www.matronics.com/Navigator?Lom-List >>> ======================== >>> cs.com >>> ======================== >>> matronics.com/contribution >>> ======================== >>> >> ww.matronics.com/Navigator?Lom-List >> com >> ronics.com/contribution >> >> >> ========================= ========= >> //www.matronics.com/Navigator?Lom-List >> ========================= ========= >> cs.com >> ========================= ========= >> matronics.com/contribution >> ========================= ========= >> > > > ww.matronics.com/Navigator?Lom-List > com > ronics.com/contribution > > > ========================== ========= ========================== ========= ========================== ========= ========================== ========= > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message lom-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Lom-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/lom-list Browse Digests http://www.matronics.com/digest/lom-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.