---------------------------------------------------------- Lom-List Digest Archive --- Total Messages Posted Wed 02/19/20: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:14 AM - Re: Any current LOM flyers? (Mr James Eby) ________________________________ Message 1 _____________________________________ Time: 06:14:07 AM PST US From: Mr James Eby Subject: Re: Lom-List: Any current LOM flyers? Hello Ben, I also have a 337C with a constant speed MT prop in my Bush Caddy 164. The engine has only 60 hrs since O/H in Prague but was in storage for 8 years. I sent the fuel pump and one magneto to LOM for overhaul and they are helpf ul, but it was four months before I saw them again in both cases. I bought the engine from an RV builder with abut 4hrs on it after he found the c. of g. was too far out. That is why he used, but in vain,=C2- a lighter MT p rop. Unfortunately the governor of a non reversible and reversible prop are not compatible and I had to install a PTO and new governor. The only other mod is I used a linear actuator to engage the super charger and starting m otor.With the 50+ hrs so far I have had no issues with the engine. I have s ome experience now in engine /magneto timing if you need any assistance. Th e spark plug modification that Steve mentioned is well worthwhile. The LOM plugs cost a small fortune. James Eby Bolton Est, Quebec, Canada450 292-3419jameseby@yahoo.ca =C2-=C2- On Tuesday, February 18, 2020, 07:12:15 p.m. CST, sjbeaver wrote: Two Bucker Jungmann with LOM 332AK are based at the Delaware, Ohio airport and fly frequently. I have previously owned an aircraft with a 337. No iss ues at all. The only mod is NGK spark plugs. I can certainly help with the setup.=C2- =C2-Let me know what you need.Steve --=C2- Stephen Beaver Tel: =C2-=C2-=C2-=C2-614-937-4189 On Feb 18, 2020, at 6:23 PM, 3benny3 wrote: Hi, anyone on here or know of anywhere else there is much lom activity or k nowledge? I have a 337c that I believe runs good and CS/reversible prop tha t I really enjoy. But would like to find more info on the setup/common prob lems/fixes/mods etc. Thanks, Ben -------- 912 King Kolbra NC27 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=494887#494887 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message lom-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Lom-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/lom-list Browse Digests http://www.matronics.com/digest/lom-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.