Today's Message Index:
----------------------
1. 06:25 AM - Titan Cylinders (lee.logan@gulfstream.com)
2. 07:22 AM - Re: Titan Cylinders (James Ball)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> LycomingEngines-List message posted by: lee.logan@gulfstream.com
Okay, I'll start this off! I'm looking for cylinders for my IO-540
project. If anyone can steer me to a source of good, rebuilt 540 cylinders
(I prefer Titan Cerminil, but will consider others ), I would greatly
appreciate it. There is an AD out on certain serial numbers of ECi's
"classic" cylinders that doesn't apply to the Cerminil. I have a core,
mags, ignition harness, etc. but need cylinders, cam, etc. Help!!
Thanks!
Lee...
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> LycomingEngines-List message posted by: "James Ball" <jball@eci2fly.com>
Hi I'm J.B. at ECi,
Please note that the Titan cylinders are new ones that we manufacture
now and are not affected by the AD. The Titan cylinders are available
with either standard steel or Nickel + Carbide ( CermiNil ) barrels.
The Classic Cast cylinders were new ones made here between 1/1997 and
8/2001 that are affected by an AD. They were made with both steel and
CermiNil barrels too. We are offering replacements for affected
cylinders at a discount and with a labor allowance for removal &
replacement.
ECi carries both new and overhauled cylinders for most Lycoming Engines.
The new Titan cylinders that we have now are the parallel valve types,
we are working diligently on the angle valve types and hope to have the
FAA/PMA approval on them by the end of the year. If you have your IO 540
engine model, ( for example; IO 540 C4B5) we can quote both new and
overhauled with the barrel options. We can also overhaul your existing
cylinders. We make cams, lifters, and many other FAA PMA approved new
parts as well.
Kind Regards,
Jim Ball
-----Original Message-----
From: owner-lycomingengines-list-server@matronics.com
[mailto:owner-lycomingengines-list-server@matronics.com] On Behalf Of
lee.logan@gulfstream.com
Sent: Tuesday, January 31, 2006 8:27 AM
Subject: LycomingEngines-List: Titan Cylinders
--> LycomingEngines-List message posted by: lee.logan@gulfstream.com
Okay, I'll start this off! I'm looking for cylinders for my IO-540
project. If anyone can steer me to a source of good, rebuilt 540
cylinders (I prefer Titan Cerminil, but will consider others ), I would
greatly appreciate it. There is an AD out on certain serial numbers of
ECi's "classic" cylinders that doesn't apply to the Cerminil. I have a
core, mags, ignition harness, etc. but need cylinders, cam, etc. Help!!
Thanks!
Lee...
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|