LycomingEngines-List Digest Archive

Wed 03/29/06


Total Messages Posted: 3



Today's Message Index:
----------------------
 
     1. 11:20 AM - Oil filler / dipstick tube gasket or O-ring (Ralph E. Capen)
     2. 11:37 AM - Re: Oil filler / dipstick tube gasket or O-ring (Dan Checkoway)
     3. 11:53 AM - Re: Oil filler / dipstick tube gasket or O-ring (Ralph E. Capen)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 11:20:01 AM PST US
    From: "Ralph E. Capen" <recapen@earthlink.net>
    Subject: Oil filler / dipstick tube gasket or O-ring
    --> LycomingEngines-List message posted by: "Ralph E. Capen" <recapen@earthlink.net> Fellow listers, I'm starting my firewall foreward after getting a new CW crankshaft (per SB566). I've got the engine on the mount and the mount on the fuse. I was looking at the oil filler / dipstick tube...there's an O-ring at the top to seal the dipstick cap with the top of the tube. There's also room for another O-ring at the bottom of the tube to seal it with the crankcase. The O-ring at the top is there - but not the one for the bottom. I've heard some say that a gasket goes at the bottom. Anyone know what it should be and what the correct part number is????? Thanks, Ralph Capen RV6A N822AR @ N06 firewall foreward.....


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 11:37:52 AM PST US
    From: "Dan Checkoway" <dan@rvproject.com>
    Subject: Re: Oil filler / dipstick tube gasket or O-ring
    --> LycomingEngines-List message posted by: "Dan Checkoway" <dan@rvproject.com> It's in the Lycoming parts catalog. Lycoming p/n 72059. Spruce sells it for $1.05. Some people I've talked to about this just use high-temp RTV to seal it instead of using the "washer" style gasket. I used the 72059 gasket and still get a little bit of weepage. )_( Dan RV-7 N714D (842 hours) http://www.rvproject.com ----- Original Message ----- From: "Ralph E. Capen" <recapen@earthlink.net> Sent: Wednesday, March 29, 2006 11:18 AM Subject: LycomingEngines-List: Oil filler / dipstick tube gasket or O-ring > --> LycomingEngines-List message posted by: "Ralph E. Capen" > <recapen@earthlink.net> > > Fellow listers, > > I'm starting my firewall foreward after getting a new CW crankshaft (per > SB566). I've got the engine on the mount and the mount on the fuse. > > I was looking at the oil filler / dipstick tube...there's an O-ring at the > top to seal the dipstick cap with the top of the tube. There's also room > for another O-ring at the bottom of the tube to seal it with the > crankcase. The O-ring at the top is there - but not the one for the > bottom. I've heard some say that a gasket goes at the bottom. > > Anyone know what it should be and what the correct part number is????? > > Thanks, > Ralph Capen > RV6A N822AR @ N06 firewall foreward..... > > >


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 11:53:59 AM PST US
    From: "Ralph E. Capen" <recapen@earthlink.net>
    Subject: Re: Oil filler / dipstick tube gasket or O-ring
    --> LycomingEngines-List message posted by: "Ralph E. Capen" <recapen@earthlink.net> Thanks Dan! -----Original Message----- >From: Dan Checkoway <dan@rvproject.com> >Sent: Mar 29, 2006 2:37 PM >To: lycomingengines-list@matronics.com >Subject: Re: LycomingEngines-List: Oil filler / dipstick tube gasket or O-ring > >--> LycomingEngines-List message posted by: "Dan Checkoway" <dan@rvproject.com> > >It's in the Lycoming parts catalog. Lycoming p/n 72059. > >Spruce sells it for $1.05. Some people I've talked to about this just use >high-temp RTV to seal it instead of using the "washer" style gasket. I used >the 72059 gasket and still get a little bit of weepage. > >)_( Dan >RV-7 N714D (842 hours) >http://www.rvproject.com > >----- Original Message ----- >From: "Ralph E. Capen" <recapen@earthlink.net> >To: <lycomingengines-list@matronics.com> >Sent: Wednesday, March 29, 2006 11:18 AM >Subject: LycomingEngines-List: Oil filler / dipstick tube gasket or O-ring > > >> --> LycomingEngines-List message posted by: "Ralph E. Capen" >> <recapen@earthlink.net> >> >> Fellow listers, >> >> I'm starting my firewall foreward after getting a new CW crankshaft (per >> SB566). I've got the engine on the mount and the mount on the fuse. >> >> I was looking at the oil filler / dipstick tube...there's an O-ring at the >> top to seal the dipstick cap with the top of the tube. There's also room >> for another O-ring at the bottom of the tube to seal it with the >> crankcase. The O-ring at the top is there - but not the one for the >> bottom. I've heard some say that a gasket goes at the bottom. >> >> Anyone know what it should be and what the correct part number is????? >> >> Thanks, >> Ralph Capen >> RV6A N822AR @ N06 firewall foreward..... >> >> >> >> >> >> >> >> >> >> >> >> >> >> > > > > > > >




    Other Matronics Email List Services

  • Post A New Message
  •   lycomingengines-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/LycomingEngines-List.htm
  • Full Archive Search Engine
  •   http://www.matronics.com/search
  • 7-Day List Browse
  •   http://www.matronics.com/browse/lycomingengines-list
  • Browse LycomingEngines-List Digests
  •   http://www.matronics.com/digest/lycomingengines-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contributions

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --