---------------------------------------------------------- M14PEngines-List Digest Archive --- Total Messages Posted Wed 04/05/06: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:02 AM - Re: V530 prop nut torque (George Coy) 2. 07:31 AM - Re: V530 prop nut torque (Scott Aldrich) ________________________________ Message 1 _____________________________________ Time: 04:02:32 AM PST US From: "George Coy" Subject: RE: M14PEngines-List: V530 prop nut torque Use 75 ft. Lbs. _____ From: owner-m14pengines-list-server@matronics.com [mailto:owner-m14pengines-list-server@matronics.com] On Behalf Of Scott Aldrich Sent: Tuesday, April 04, 2006 9:48 PM Subject: M14PEngines-List: V530 prop nut torque Just put the V530 prop on. Any torque numbers out there? I couldn't find it. I don't have a torque wrench that will fit in there anyway so just looking for a WAG to use by feel. THX Scott ________________________________ Message 2 _____________________________________ Time: 07:31:55 AM PST US From: "Scott Aldrich" Subject: RE: M14PEngines-List: V530 prop nut torque THX George. Do not archive _____ From: owner-m14pengines-list-server@matronics.com [mailto:owner-m14pengines-list-server@matronics.com] On Behalf Of George Coy Sent: Wednesday, April 05, 2006 5:01 AM Subject: RE: M14PEngines-List: V530 prop nut torque Use 75 ft. Lbs. _____ From: owner-m14pengines-list-server@matronics.com [mailto:owner-m14pengines-list-server@matronics.com] On Behalf Of Scott Aldrich Sent: Tuesday, April 04, 2006 9:48 PM Subject: M14PEngines-List: V530 prop nut torque Just put the V530 prop on. Any torque numbers out there? I couldn't find it. I don't have a torque wrench that will fit in there anyway so just looking for a WAG to use by feel. THX Scott