Today's Message Index:
----------------------
 
     1. 01:54 PM - Rocker arm & Valve clearance (John Nafziger)
     2. 02:33 PM - Re: Rocker arm & Valve clearance (George Coy)
 
 
 

Message 1


					INDEX
 Back to Main INDEX
					NEXT
 Skip to NEXT Message
	LIST
 Reply to LIST Regarding this Message
		SENDER
 Reply to SENDER Regarding this Message

      
      
Time: 
01:54:02 PM PST US
From: 
John Nafziger <jsnafziger@yahoo.com>
Subject: 
Rocker arm & Valve clearance
      
      
      I went over the rocker arm & valve clearance per the maintance manual
      (task card 247).  It states a clearance of 0.3 mm for both valves,
      cold.  
      
      The clearances on mine (romanian m14p) were mostly 0.3 mm for the
      intake valves, but 0.45 mm for the exhaust valves.  I set them all at
      0.3 mm per the manual, but due to the consistancy of the exhaust
      settings, I thought I'd ask if anyone has found a similar thing?  
      
      The placard on the nose case states 0.010", but I thought 0.012"
      (0.3mm) close enough.
      
      Thanks,
      John
      
      
             
      http://smallbusiness.yahoo.com/webhosting 
      
      

Message 2


					INDEX
 Back to Main INDEX
				PREVIOUS
 Skip to PREVIOUS Message
					NEXT
 Skip to NEXT Message
	LIST
 Reply to LIST Regarding this Message
		SENDER
 Reply to SENDER Regarding this Message

      
      
Time: 
02:33:22 PM PST US
From: 
"George Coy" <george@gesoco.com>
Subject: 
Rocker arm & Valve clearance
      
      
      You are correct. .012 is closer. It is normal for them to ware. We recommend
      adjustment at 30 hours from new and then every 100 hrs. 
      George 
      
      -----Original Message-----
      From: owner-m14pengines-list-server@matronics.com
      [mailto:owner-m14pengines-list-server@matronics.com] On Behalf Of John
      Nafziger
      Sent: Monday, September 10, 2007 4:54 PM
      Subject: M14PEngines-List: Rocker arm & Valve clearance
      
      --> <jsnafziger@yahoo.com>
      
      I went over the rocker arm & valve clearance per the maintance manual (task
      card 247).  It states a clearance of 0.3 mm for both valves, cold.  
      
      The clearances on mine (romanian m14p) were mostly 0.3 mm for the intake
      valves, but 0.45 mm for the exhaust valves.  I set them all at
      0.3 mm per the manual, but due to the consistancy of the exhaust settings, I
      thought I'd ask if anyone has found a similar thing?  
      
      The placard on the nose case states 0.010", but I thought 0.012"
      (0.3mm) close enough.
      
      Thanks,
      John
      
      
             
      http://smallbusiness.yahoo.com/webhosting 
      
      








Other Matronics Email List Services




Post A New Message
  
m14pengines-list@matronics.com
UN/SUBSCRIBE
  
http://www.matronics.com/subscription
List FAQ
  
http://www.matronics.com/FAQ/M14PEngines-List.htm
Web Forum Interface To Lists
  
http://forums.matronics.com
Matronics List Wiki
  
http://wiki.matronics.com
7-Day List Browse
  
http://www.matronics.com/browse/m14pengines-list
Browse M14PEngines-List Digests
  
http://www.matronics.com/digest/m14pengines-list
Browse Other Lists
  
http://www.matronics.com/browse
Live Online Chat!
  
http://www.matronics.com/chat
Archive Downloading
  
http://www.matronics.com/archives
Photo Share
  
http://www.matronics.com/photoshare
Other Email Lists
  
http://www.matronics.com/emaillists
Contributions
  
http://www.matronics.com/contribution









These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.




-- Please support this service by making your Contribution today! --