---------------------------------------------------------- M14PEngines-List Digest Archive --- Total Messages Posted Tue 01/27/09: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:53 AM - sensors & probes (loray@compuserve.com) 2. 12:20 PM - Re: Reversing propeller (HBaker) 3. 03:11 PM - Re: Hoses (HBaker) 4. 06:26 PM - Re: Re: Hoses (B-L Pollock) ________________________________ Message 1 _____________________________________ Time: 02:53:28 AM PST US From: "loray@compuserve.com" Subject: M14PEngines-List: sensors & probes I've ordered an I-K Technologies' AIM-3000 engine monitor for an M-14PF, and some questions have come up about the sensors and probes. I'm hoping someone here can help. Regarding the RPM sensor, Ralph at I-K Tech writes: "We will provide a VDO sensor with a 1/8-27 NPT thread." Does this sound right? He's also asking me what size oil temp probe I want. Since we'll be converting to western hoses and AN fittings, I assume that any temp probe that can fit a AN Tee fitting would work. If someone has already done this and knows what works well, I'd be appreciative for some guidance. Thanks, Loray Greiner -------------------------------------------------------------------- mail2web LIVE Free email based on Microsoft Exchange technology - http://link.mail2web.com/LIVE ________________________________ Message 2 _____________________________________ Time: 12:20:50 PM PST US Subject: M14PEngines-List: Re: Reversing propeller From: "HBaker" Hi What Prop are you going with, is it two blade or three blade? Henry Moose #294 -------- Currently building a Murphy Moose - any help would be appreciated. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=227170#227170 ________________________________ Message 3 _____________________________________ Time: 03:11:49 PM PST US Subject: M14PEngines-List: Re: Hoses From: "HBaker" Thanks Bill So #12 is the right size of fittings, did you go with aluminum fittings, and did you go with fittings that you make yourself? And the #4 line , is it for the clean kit that uses the scavange pump, and is that all that it hooks up to? Henry Moose 294 -------- Currently building a Murphy Moose - any help would be appreciated. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=227215#227215 ________________________________ Message 4 _____________________________________ Time: 06:26:48 PM PST US From: "B-L Pollock" Subject: Re: M14PEngines-List: Re: Hoses Henry, I use three 90 aluminum fittings and the rest straight and yes its better to custom make yourself with caution of not to kink the steel braided hose in curves.I only used steel bulkhead fittings for fuel lines through the firewall which my inspector wanted .The scavenging system goes from the front nose of the engine to the scavening pump and the to the external oil tank.Hope that helps. Bill Moose 244 ----- Original Message ----- From: "HBaker" Sent: Tuesday, January 27, 2009 6:07 PM Subject: M14PEngines-List: Re: Hoses > > > Thanks Bill > > So #12 is the right size of fittings, did you go with aluminum fittings, > and did you go with fittings that you make yourself? And the #4 line , is > it for the clean kit that uses the scavange pump, and is that all that it > hooks up to? > > Henry > > Moose 294 > > -------- > Currently building a Murphy Moose - any help would be appreciated. > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=227215#227215 > > -------------------------------------------------------------------------------- Checked by AVG - http://www.avg.com 7:26 AM ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message m14pengines-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/M14PEngines-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/m14pengines-list Browse Digests http://www.matronics.com/digest/m14pengines-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.