Today's Message Index:
----------------------
1. 02:11 PM - m14p to 14pf (james shaner)
2. 02:15 PM - Re: m14p to 14pf (Rhonda Bewley)
3. 02:20 PM - Re: m14p to 14pf (A. Dennis Savarese)
4. 02:24 PM - Re: m14p to 14pf (George Coy)
5. 02:41 PM - Re: m14p to 14pf (Rhonda Bewley)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Is there any external visual indication that a 14p has been converted to a
pf? Logbook does not have any such entry but engine gets 410hp on a dyno..
..
Jim Shaner
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Whose dyno?
________________________________
From: owner-m14pengines-list-server@matronics.com
[mailto:owner-m14pengines-list-server@matronics.com] On Behalf Of james
shaner
Sent: Tuesday, February 02, 2010 4:12 PM
Subject: M14PEngines-List: m14p to 14pf
Is there any external visual indication that a 14p has been converted to
a pf? Logbook does not have any such entry but engine gets 410hp on a
dyno....
Jim Shaner
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: m14p to 14pf |
Yes, whose dyno? The external physical indication is the manifold
pressure will be about 40" or so. A stock M14P develops about 35" of
manifold pressure.
Dennis
----- Original Message -----
From: Rhonda Bewley
To: m14pengines-list@matronics.com
Sent: Tuesday, February 02, 2010 4:20 PM
Subject: RE: M14PEngines-List: m14p to 14pf
Whose dyno?
-------------------------------------------------------------------------
-----
From: owner-m14pengines-list-server@matronics.com
[mailto:owner-m14pengines-list-server@matronics.com] On Behalf Of james
shaner
Sent: Tuesday, February 02, 2010 4:12 PM
To: m14pengines-list@matronics.com
Subject: M14PEngines-List: m14p to 14pf
Is there any external visual indication that a 14p has been converted
to a pf? Logbook does not have any such entry but engine gets 410hp on
a dyno....
Jim Shaner
http://www.matronics.com/Navigator?M14PEngines-Listhttp://forums.matronic
s.comhttp://www.matronics.com/contribution
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
No there is no external indication other than the data plate. If it was
converted from a "P" to a "PF" or was built originally as a "PF" it should
be stamped on the data plate. The log book should also show the model
number. Engine test page should also show the higher HP.
George Coy
CAS Ltd.
714 Airport Rd.
Swanton VT 05488
802-868-5633 off
802-363-5782 cell
george.coy@gmail.com
http://coyafct.com/
SKYPE george.coy
From: owner-m14pengines-list-server@matronics.com
[mailto:owner-m14pengines-list-server@matronics.com] On Behalf Of james
shaner
Sent: Tuesday, February 02, 2010 5:12 PM
Subject: M14PEngines-List: m14p to 14pf
Is there any external visual indication that a 14p has been converted to a
pf? Logbook does not have any such entry but engine gets 410hp on a
dyno....
Jim Shaner
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Hi George:
Your information is true if it has been done at the factory. But, we
did recently had an M14 here that had been converted to a PF "in the
field" with no log book entry as to the conversion at all. It was
converted back to a P after the supercharger failed. Unless it was done
by the factory or somewhere like Termikas, I don't think there's anyone
running them on a dyno . . . . yet!
Rhonda Barrett-Bewley
Barrett Precision Engines, Inc.
________________________________
From: owner-m14pengines-list-server@matronics.com
[mailto:owner-m14pengines-list-server@matronics.com] On Behalf Of George
Coy
Sent: Tuesday, February 02, 2010 4:24 PM
Subject: RE: M14PEngines-List: m14p to 14pf
No there is no external indication other than the data plate. If it was
converted from a "P" to a "PF" or was built originally as a "PF" it
should be stamped on the data plate. The log book should also show the
model number. Engine test page should also show the higher HP.
George Coy
CAS Ltd.
714 Airport Rd.
Swanton VT 05488
802-868-5633 off
802-363-5782 cell
george.coy@gmail.com
http://coyafct.com/
SKYPE george.coy
From: owner-m14pengines-list-server@matronics.com
[mailto:owner-m14pengines-list-server@matronics.com] On Behalf Of james
shaner
Sent: Tuesday, February 02, 2010 5:12 PM
Subject: M14PEngines-List: m14p to 14pf
Is there any external visual indication that a 14p has been converted to
a pf? Logbook does not have any such entry but engine gets 410hp on a
dyno....
Jim Shaner
http://www.matronics.com/Navigator?M14PEngines-List
http://forums.matronics.com
http://www.matronics.com/contribution
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|