---------------------------------------------------------- M14PEngines-List Digest Archive --- Total Messages Posted Fri 02/11/11: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 08:47 AM - Re: M14PEngines-List Digest: 3 Msgs - 02/10/11 (Sylvain April) 2. 01:02 PM - V530 Composite Blades and Spinners (WhirlWind) ________________________________ Message 1 _____________________________________ Time: 08:47:06 AM PST US From: Sylvain April Subject: M14PEngines-List: RE: M14PEngines-List Digest: 3 Msgs - 02/10/11 Hi=2C Thanks for the information=2C 2.5 X the engine RPM. I am using an Odyssey MGL EFIS =2C it can accept a variety of signal of man y type=2C I am actually using a tacho generator 2 pole AC generator on the air starting distributor which is half the speed of the engine. it is to sl ow and I dont have a good steady reading below 1000 RPM. Also with a low fr equency the Odyssey is slow to update the reading=2C I am told that it woul d be improved using a higher frequency. My alternator is a Jasco 24V unit=2C I think the rotor have 6 poles=2C with a stator connection point I should get a good 3 voltage pulses per turn in regard to the engine ground=2C X 2.5 this will give me 7.5 pulses per engi ne turn. This should improve the low range and overall response of my readi ngs. Thanks again. Sylvain Murphy Moose. > Date: Thu=2C 10 Feb 2011 23:57:01 -0800 > From: m14pengines-list@matronics.com > To: m14pengines-list-digest@matronics.com > Subject: M14PEngines-List Digest: 3 Msgs - 02/10/11 > > * > > ======================== > Online Versions of Today's List Digest Archive > ======================== > > Today's complete M14PEngines-List Digest can also be found in either of t he > two Web Links listed below. The .html file includes the Digest formatted > in HTML for viewing with a web browser and features Hyperlinked Indexes > and Message Navigation. The .txt file includes the plain ASCII version > of the M14PEngines-List Digest and can be viewed with a generic text edit or > such as Notepad or with a web browser. > > HTML Version: > > http://www.matronics.com/digest/digestview.php?Style=82701&View=html& Chapter 11-02-10&Archive=M14PEngines > > Text Version: > > http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&C hapter 11-02-10&Archive=M14PEngines > > > ======================== ======================= > EMail Version of Today's List Digest Archive > ======================== ======================= > > > ---------------------------------------------------------- > M14PEngines-List Digest Archive > --- > Total Messages Posted Thu 02/10/11: 3 > ---------------------------------------------------------- > > > Today's Message Index: > ---------------------- > > 1. 08:42 AM - Re: M14PEngines-List Digest: 0 Msgs - 02/09/11 (Sylvain Apr il) > 2. 09:12 AM - Re: Re: M14PEngines-List Digest: 0 Msgs - 02/09/11 (A. Denn is Savarese) > 3. 09:23 AM - Re: Re: M14PEngines-List Digest: 0 Msgs - 02/09/11 (Cliff C oy) > > > > ________________________________ Message 1 ______________________________ _______ > > > Time: 08:42:07 AM PST US > From: Sylvain April > Subject: M14PEngines-List: RE: M14PEngines-List Digest: 0 Msgs - 02/09/11 > > > Hi everybody=2C > > Please can anyone tell me the RPM of the alternator in regard with the en gi > ne RPM on a M-14P. I need the frequency of the stator to use as a signal to > one EFIS for the engine RPM. > > Thanks > Sylvain > Murphy Moose. > > > > Date: Wed=2C 9 Feb 2011 23:57:07 -0800 > > From: m14pengines-list@matronics.com > > To: m14pengines-list-digest@matronics.com > > Subject: M14PEngines-List Digest: 0 Msgs - 02/09/11 > > > > * > > > > ======================= > > > Online Versions of Today's List Digest Archive > > ======================= > > > > > Today's complete M14PEngines-List Digest can also be found in either of t > he > > two Web Links listed below. The .html file includes the Digest formatte d > > > in HTML for viewing with a web browser and features Hyperlinked Indexes > > and Message Navigation. The .txt file includes the plain ASCII version > > of the M14PEngines-List Digest and can be viewed with a generic text ed it > or > > such as Notepad or with a web browser. > > > > HTML Version: > > > > http://www.matronics.com/digest/digestview.php?Style=82701&View=htm l& > Chapter 11-02-09&Archive=M14PEngines > > > > Text Version: > > > > http://www.matronics.com/digest/digestview.php?Style=82701&View=txt &C > hapter 11-02-09&Archive=M14PEngines > > > > > > ======================= > ====================== > > EMail Version of Today's List Digest Archive > > ======================= > ====================== > > > > > > ---------------------------------------------------------- > > M14PEngines-List Digest Archive > > --- > > Total Messages Posted Wed 02/09/11: 0 > > ---------------------------------------------------------- > > > > > > Today's Message Index: > > ---------------------- > > > > > > > > > > > > > > > ========== > ========== > ========== > ========== > > > > > > > > > > > ________________________________ Message 2 ______________________________ _______ > > > Time: 09:12:31 AM PST US > From: "A. Dennis Savarese" > Subject: Re: M14PEngines-List: RE: M14PEngines-List Digest: 0 Msgs - 02/0 9/11 > > > This may help. From the M14P manual. > > 1.2.13. Generator > > Designation .................................GSR-3000M=2C series 4 > > Type ....................................... DC > > Number per engine .......................... 1 > > Drive transmission ratio ................... 2.5 > > Drive direction of rotation ................ LH > > Dennis > > > On 2/10/2011 10:19 AM=2C Sylvain April wrote: > > Hi everybody=2C > > > > Please can anyone tell me the RPM of the alternator in regard with the > > engine RPM on a M-14P. I need the frequency of the stator to use as a > > signal to one EFIS for the engine RPM. > > > > Thanks > > Sylvain > > Murphy Moose. > > > > > > > Date: Wed=2C 9 Feb 2011 23:57:07 -0800 > > > From: m14pengines-list@matronics.com > > > To: m14pengines-list-digest@matronics.com > > > Subject: M14PEngines-List Digest: 0 Msgs - 02/09/11 > > > > > > * > > > > > > ======================= > > > Online Versions of Today's List Digest Archive > > > ======================= > > > > > > Today's complete M14PEngines-List Digest can also be found in either > > of the > > > two Web Links listed below. The .html file includes the Digest format ted > > > in HTML for viewing with a web browser and features Hyperlinked Index es > > > and Message Navigation. The .txt file includes the plain ASCII versio n > > > of the M14PEngines-List Digest and can be viewed with a generic text > > editor > > > such as Notepad or with a web browser. > > > > > > HTML Version: > > > > > > > > http://www.matronics.com/digest/digestview.php?Style=82701&View=htm l&Chapter 11-02-09&Archive=M14PEngines > > > > > > Text Version: > > > > > > > > http://www.matronics.com/digest/digestview.php?Style=82701&View=txt &Chapter 11-02-09&Archive=M14PEngines > > > > > > > > > ===================== > > > EMail Version of Today's List Digest Archive > > > ===================== > > > > > > > > > ---------------------------------------------------------- > > > M14PEngines-List Digest Archive > > > --- > > > Total Messages Posted Wed 02/09/11: 0 > > > ---------------------------------------------------------- > > > > > > > > > Today's Message Index: > > > ---------------------- > > > > > > <===================== > > &g===== > > > > > > > > > > > > > > > > * > > > > > > * > > > ________________________________ Message 3 ______________________________ _______ > > > Time: 09:23:44 AM PST US > Subject: Re: M14PEngines-List: RE: M14PEngines-List Digest: 0 Msgs - 02/0 9/11 > From: Cliff Coy > > *Interesting idea Sylvain! > > The maintenance manual shows the drive ratio to be 2.5 > > Let me know how it goes.... > > Whose tach system uses the stator winding? > > Cheers=2C > Cliff > * > On Thu=2C Feb 10=2C 2011 at 11:19=2C Sylvain April wrote: > > > Hi everybody=2C > > > > Please can anyone tell me the RPM of the alternator in regard with the > > engine RPM on a M-14P. I need the frequency of the stator to use as a s ignal > > to one EFIS for the engine RPM. > > > > Thanks > > Sylvain > > Murphy Moose. > > > > > -- > Clifford Coy > Border Air Ltd. > 629 Airport Rd. > Swanton=2C VT 05488 > 802-868-2822 TEL > 802-868-4465 FAX > Skype: Cliff.Coy > > > > =========== =========== =========== =========== > > > > ________________________________ Message 2 _____________________________________ Time: 01:02:24 PM PST US Subject: M14PEngines-List: V530 Composite Blades and Spinners From: "WhirlWind" Hello, this is Patti at Whirl Wind Propellers. At the request of one of the list members, I am posting this information for the new composite blades and spinners now available for the V530 propellers. I hope you all find this information useful, and if you have any questions, please feel welcome to call or email anytime. Whirl Wind is now shipping the new composite W530 propeller blades which are a direct replacement for the wood V530 propeller blades as well as the 20" diameter composite spinner that works with either the V530 or W530 blades. http://www.whirlwindpropellers.com/v530/index.html W530 Composite Blades The new WhirlWind W530 all-composite blades are designed to fit the existing V530 propeller hub on M-14P engine powered aircraft. The W530 blades have an updated blade twist distribution, new airfoils and a unique profile to give improved take-off, climb, and cruise performance with smooth quiet operation. The unique Whisper Tip scimitar blade planform reduces aerodynamic transonic drag, increases efficiency and reduces prop noise. This means more performance for your airplane, and less noise from the propeller. The W530 has an increased diameter of 98.5 (250cm) which translates to better climb performance. There is also a 6 lbs weight savings with the new W530 blades. The picture below shows the new W530 blades installed on Ryan Carroll's Yak 52. Ryan has done some test flying to compare the V530 and W530 blade performance. He is on this list and would probably be a good resource to answer questions regarding performance or installation of the W530 blades. New W530 Diameter: 250 cm (98.5 inches) Construction: Thermo-set Aerospace Graphite composite Leading Edge: Flush bond Nickel Weight: 15.5 lbs (6 lbs savings per set) Original Wood V530 Diameter: 240 cm (94.5 inches) Construction: Wood Leading Edge: Riveted Multi-piece Stainless Weight: 18.5 lbs Spinners We also have a new composite 20" diameter spinner that will turn your trainer into a fighter. The spinner comes with front & rear bulkheads installed, nutplates installed. The spinner will arrive fitted & trimmed with a primer coat ready for paint. The current price is $1,500 USD plus shipping. Please feel welcome to call or email me with any questions and I would be happy to talk with you. Where to Buy The W530 composite blades and the 20" Spinner can be purchased from: M-14P.com and WhirlWindPropellers.com Current Pricing* W530 Blades: $6,000 per set 20" Spinner: $1,500 *All prices USD, **All prices are subject to change without notice, *** Prices do not include shipping cost Sincerely, Patti Whirl Wind Propellers wwpdc(at)whirlwindpropellers.com 619-562-3725 Read this topic online here: http://forums.matronics.com/viewtopic.php?p=330646#330646 Attachments: http://forums.matronics.com//files/mike_decanio2_138.bmp http://forums.matronics.com//files/20inch_v530spinner_post_316.jpg http://forums.matronics.com//files/v530spinner_dwg_post_209.jpg http://forums.matronics.com//files/w530_post_166.jpg ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message m14pengines-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/M14PEngines-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/m14pengines-list Browse Digests http://www.matronics.com/digest/m14pengines-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.