---------------------------------------------------------- MurphyMoose-List Digest Archive --- Total Messages Posted Thu 06/22/06: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:53 PM - Re: ? Rebel Quick Build (Chris In Madison) 2. 07:03 PM - Re: Re: ? Rebel Quick Build (Scott Aldrich) 3. 07:54 PM - Re: ? Rebel Quick Build (Chris In Madison) ________________________________ Message 1 _____________________________________ Time: 01:53:26 PM PST US From: "Chris In Madison" Subject: MurphyMoose-List: Re: ? Rebel Quick Build --> MurphyMoose-List message posted by: "Chris In Madison" I just got off the phone with them to order an info pack and video for the Moose. They're aware that their web site is a wreck at the moment and the person I talked to said that they hope to have an all-new site ready in a week or so (hopefully). I didn't ask about the bucked-rivet construction, but I thought I read somewhere that the QB kits were, indeed, buck riveted. I've done a lot of reading over the past week or two, and danged if I can remember where I read it. The current price for standard kit as of this date is US$38420, and the quick build is US$64420. Hope there's a sliver of useful information in there somewhere :D Best regards, Chris -------- Chris Owens Still Dreaming of a CH801 Waunakee, WI Read this topic online here: http://forums.matronics.com/viewtopic.php?p=42350#42350 ________________________________ Message 2 _____________________________________ Time: 07:03:34 PM PST US From: "Scott Aldrich" Subject: RE: MurphyMoose-List: Re: ? Rebel Quick Build --> MurphyMoose-List message posted by: "Scott Aldrich" Chris was that a typo or has the quick build gone up another $10,000 in just the past 3 months?? It was $54K for the quick built not that long ago. Or possibly that is with the solid rivets and the pulled is less? Scott Moose 174 -----Original Message----- [mailto:owner-murphymoose-list-server@matronics.com] On Behalf Of Chris In Madison Sent: Thursday, June 22, 2006 2:52 PM --> MurphyMoose-List message posted by: "Chris In Madison" I just got off the phone with them to order an info pack and video for the Moose. They're aware that their web site is a wreck at the moment and the person I talked to said that they hope to have an all-new site ready in a week or so (hopefully). I didn't ask about the bucked-rivet construction, but I thought I read somewhere that the QB kits were, indeed, buck riveted. I've done a lot of reading over the past week or two, and danged if I can remember where I read it. The current price for standard kit as of this date is US$38420, and the quick build is US$64420. Hope there's a sliver of useful information in there somewhere :D Best regards, Chris -------- Chris Owens Still Dreaming of a CH801 Waunakee, WI Read this topic online here: http://forums.matronics.com/viewtopic.php?p=42350#42350 ________________________________ Message 3 _____________________________________ Time: 07:54:39 PM PST US From: "Chris In Madison" Subject: MurphyMoose-List: Re: ? Rebel Quick Build --> MurphyMoose-List message posted by: "Chris In Madison" Hi Scott, That was the number I got from the person on the phone, unless I just misunderstood. It might have been $50K instead of $60K (significant, I know, but they sound alike). I'll find out in a couple of days when the info pack arrives and check back with the current numbers. Best regards, Chris -------- Chris Owens Still Dreaming of a CH801 Waunakee, WI Read this topic online here: http://forums.matronics.com/viewtopic.php?p=42436#42436