----------------------------------------------------------
                           MurphyMoose-List Digest Archive
                                      ---
                     Total Messages Posted Thu 08/17/06: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 09:25 PM - exhaust outlet Question  (KJKimball@aol.com)
     2. 09:58 PM - Re: exhaust outlet Question  (Mark Cupitt)
 
 
 
________________________________  Message 1  _____________________________________


Time: 09:25:15 PM PST US
From: KJKimball@aol.com
Subject: MurphyMoose-List: exhaust outlet Question

Group,

Could one of you measure the center to center dimension of the exhaust  
outlet locations on the Moose cowl and get the number to me?  Basically,  the 
center to center measurement of the tail pipes at the cowl.  We have a  question
on 
it and I don't have access to a cowl here in FL.  Thanks in  advance!

Sincerely,

Kevin Kimball, 
VP Engineering
Jim  Kimball Enterprises, Inc.
PO Box 849, 5354 Cemetery Rd.
Zellwood, FL  32798
407-889-3451 phone
407-889-7168 fax
_www.jimkimballenterprises.com_ (http://www.jimkimballenterprises.com/) 
_www.pittsmodel12.com_ (http://www.pittsmodel12.com/) 

________________________________  Message 2  _____________________________________


Time: 09:58:56 PM PST US
From: "Mark Cupitt" <mark@metalcrafters.ph>
Subject: RE: MurphyMoose-List: exhaust outlet Question

Kevin


Measured the cowls we have here and they are 20 =BE=94 center to center 
(give or
take 1/8=94) If you need more precise, let me know


Regards


Mark Cupitt

Philippines


  _____  

From: owner-murphymoose-list-server@matronics.com
[mailto:owner-murphymoose-list-server@matronics.com] On Behalf Of
KJKimball@aol.com
Sent: Friday, August 18, 2006 10:28 AM
Subject: MurphyMoose-List: exhaust outlet Question


Group,


Could one of you measure the center to center dimension of the exhaust
outlet locations on the Moose cowl and get the number to me?  Basically, 
the
center to center measurement of the tail pipes at the cowl.  We have a
question on it and I don't have access to a cowl here in FL.  Thanks in
advance!


Sincerely,

Kevin Kimball, VP Engineering
Jim Kimball Enterprises, Inc.
PO Box 849, 5354 Cemetery Rd.
Zellwood, FL 32798
407-889-3451 phone
407-889-7168 fax
www.jimkimballenterprises.com <http://www.jimkimballenterprises.com/> 
www.pittsmodel12.com <http://www.pittsmodel12.com/>