----------------------------------------------------------
                           MurphyMoose-List Digest Archive
                                      ---
                     Total Messages Posted Thu 10/23/08: 1
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 10:35 AM - Re: Murphy Moose-List Digest: 1 Msgs - 10/22/08  (Richard Wampach)
 
 
 
________________________________  Message 1  _____________________________________


Time: 10:35:45 AM PST US
From: "Richard Wampach" <rwampach@comcast.net>
Subject: MurphyMoose-List: RE: Murphy Moose-List Digest: 1 Msgs - 10/22/08


Ted,
You can find converter boxes 10 - 15 Amp output, 12v to 24v or 24v to
12v.  If you run a 2 buss systems you can run the 12 volt items such as
trim servo and other 12 v required items.  Then run other things like
landing lights, strobes, avionics Etc. from the primary 24 volt buss.

If you have only a few items that require 12 volts you might think of
using 2 12v batteries instead of 1 24v battery.  Then tap off between
them for the 12v source.  This may require a diode or two in the system.
I would suggest talking to an avionics shop for this guidance.

I do not have any thing on panel lay out, if you do find something
please share.

Dick Wampach	SR-108

Time: 04:46:01 PM PST US
From: "Ted French" <ted_french@telus.net>
Subject: MurphyMoose-List: Autocad drawing for Moose panel

MessageI am looking for an AutoCad drawing file, either dwg or dxf for
the
Moose panel. I need to do the layout for the instrumentation, and I
cannot
find a template for the blank panel. If anyone can help it will be
greatly
appreciated....

Also, if anyone can give me their thoughts on how to match a M14P with a
28
volt electrical system to a 12 volt airplane, that would be very
helpful.

Thanks

Ted French


 

-------------------------------------------------------------------------------------
                       Other Matronics Email List Services
-------------------------------------------------------------------------------------
Post A New Message               murphymoose-list@matronics.com
UN/SUBSCRIBE                     http://www.matronics.com/subscription
List FAQ                         http://www.matronics.com/FAQ/MurphyMoose-List.htm
Web Forum Interface To Lists     http://forums.matronics.com
Matronics List Wiki              http://wiki.matronics.com
Full Archive Search Engine       http://www.matronics.com/search
7-Day List Browse                http://www.matronics.com/browse/murphymoose-list
Browse Digests                   http://www.matronics.com/digest/murphymoose-list
Browse Other Lists               http://www.matronics.com/browse
Live Online Chat!                http://www.matronics.com/chat
Archive Downloading              http://www.matronics.com/archives
Photo Share                      http://www.matronics.com/photoshare
Other Email Lists                http://www.matronics.com/emaillists
Contributions                    http://www.matronics.com/contribution
-------------------------------------------------------------------------------------

These Email List Services are sponsored solely by Matronics and through the 
generous Contributions of its members.