MurphyMoose-List Digest Archive

Wed 08/03/16


Total Messages Posted: 3



Today's Message Index:
----------------------
 
     1. 12:18 AM - Auto Response: MurphyMoose-List Digest: 1 Msgs - 08/02/16 (Kit layland)
     2. 05:19 PM - Re: MurphyMoose-List Digest: 1 Msgs - 08/02/16 (Sylvain)
     3. 05:32 PM - Re: MurphyMoose-List Digest: 1 Msgs - 08/02/16 (Sylvain)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 12:18:00 AM PST US
    From: Kit layland <kitlayland@yahoo.com>
    Subject: Auto Response: MurphyMoose-List Digest: 1 Msgs - 08/02/16
    I will not be monitoring e-mails between 08/03-15/2016 during the day but w ill check them in the evening.=C2-=C2- If questions contact either John Dombrowski or Mark Steinhilber in my offic e (630)654-3710.


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:19:38 PM PST US
    From: Sylvain <sapril001@hotmail.com>
    Subject: Re: MurphyMoose-List Digest: 1 Msgs - 08/02/16
    Hi, Here is a picture of the torque tube, in flap up position, no interference at all, the horn being redrilled for the pull cable attachment, I have ful l 39 deg, down, even space for my fuel line going down the door post. Regards. ________________________________ From: owner-murphymoose-list-server@matronics.com <owner-murphymoose-list-s erver@matronics.com> on behalf of MurphyMoose-List Digest Server <murphymoo se-list@matronics.com> Sent: August 3, 2016 3:01:56 AM Subject: MurphyMoose-List Digest: 1 Msgs - 08/02/16 * ======================== Online Versions of Today's List Digest Archive ======================== Today's complete MurphyMoose-List Digest can also be found in either of the two Web Links listed below. The .html file includes the Digest formatted in HTML for viewing with a web browser and features Hyperlinked Indexes and Message Navigation. The .txt file includes the plain ASCII version of the MurphyMoose-List Digest and can be viewed with a generic text editor such as Notepad or with a web browser. HTML Version: http://www.matronics.com/digest/digestview.php?Style=82701&View=htm l&Chapter 16-08-02&Archive=MurphyMoose Text Version: http://www.matronics.com/digest/digestview.php?Style=82701&View=txt &Chapter 16-08-02&Archive=MurphyMoose ======================== ======================= EMail Version of Today's List Digest Archive ======================== ======================= ---------------------------------------------------------- MurphyMoose-List Digest Archive --- Total Messages Posted Tue 08/02/16: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:18 PM - Re: Moose flaps (jgoodwin) ________________________________ Message 1 ______________________________ _______ Time: 07:18:29 PM PST US Subject: MurphyMoose-List: Re: Moose flaps From: "jgoodwin" <goody989@msn.com> Regarding the flap interconnect cross tube and the horns on each end for th e retract springs: can anyone tell me where I went wrong that I have major interferen ce with the door posts? thanks... Has Murphy ever said anything about redrilling the upper flap horn to achie ve the travel? Read this topic online here: http://forums.matronics.com/viewtopic.php?p=459135#459135


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:32:19 PM PST US
    From: Sylvain <sapril001@hotmail.com>
    Subject: Re: MurphyMoose-List Digest: 1 Msgs - 08/02/16
    Hi, Here is a picture of the torque tube, in flap up position, no interference at all, the horn being redrilled for the pull cable attachment, I have ful l 39 deg, down, even space for my fuel line going down the door post. Regards. [https://attachment.outlook.office.net/owa/sapril001@hotmail.com/service.sv c/s/GetFileAttachment?id=AQMkADAwATZiZmYAZC05NTM0LTEwYjMtMDACLTAwCgBGAAAD iYWEsZp94EKs%2B%2FTxBhU06wcAGH2Irgq5akit5HzMo8yW1gAAAgEPAAAAGH2Irgq5akit5Hz Mo8yW1gAAACBp52UAAAABEgAQANBmIdKWlw9Duq54lWndxd0%3D&X-OWA-CANARY=bbqEK9Fo qEO3OLrVZmWWvjCxYK3-u9MYR3KeOLo4Xy0ib4m-CX9xBRj_q7WW_jRX_bm2CA-ZjoE.&token =0afc2b8e-a2b1-407c-939a-5b091da17e1d&owa=outlook.live.com&isc=1] ________________________________ From: owner-murphymoose-list-server@matronics.com <owner-murphymoose-list-s erver@matronics.com> on behalf of MurphyMoose-List Digest Server <murphymoo se-list@matronics.com> Sent: August 3, 2016 3:01:56 AM Subject: MurphyMoose-List Digest: 1 Msgs - 08/02/16 * ======================== Online Versions of Today's List Digest Archive ======================== Today's complete MurphyMoose-List Digest can also be found in either of the two Web Links listed below. The .html file includes the Digest formatted in HTML for viewing with a web browser and features Hyperlinked Indexes and Message Navigation. The .txt file includes the plain ASCII version of the MurphyMoose-List Digest and can be viewed with a generic text editor such as Notepad or with a web browser. HTML Version: http://www.matronics.com/digest/digestview.php?Style=82701&View=htm l&Chapter 16-08-02&Archive=MurphyMoose Text Version: http://www.matronics.com/digest/digestview.php?Style=82701&View=txt &Chapter 16-08-02&Archive=MurphyMoose ======================== ======================= EMail Version of Today's List Digest Archive ======================== ======================= ---------------------------------------------------------- MurphyMoose-List Digest Archive --- Total Messages Posted Tue 08/02/16: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:18 PM - Re: Moose flaps (jgoodwin) ________________________________ Message 1 ______________________________ _______ Time: 07:18:29 PM PST US Subject: MurphyMoose-List: Re: Moose flaps From: "jgoodwin" <goody989@msn.com> Regarding the flap interconnect cross tube and the horns on each end for th e retract springs: can anyone tell me where I went wrong that I have major interferen ce with the door posts? thanks... Has Murphy ever said anything about redrilling the upper flap horn to achie ve the travel? Read this topic online here: http://forums.matronics.com/viewtopic.php?p=459135#459135




    Other Matronics Email List Services

  • Post A New Message
  •   murphymoose-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/MurphyMoose-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/murphymoose-list
  • Browse MurphyMoose-List Digests
  •   http://www.matronics.com/digest/murphymoose-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --