---------------------------------------------------------- Pelican-List Digest Archive --- Total Messages Posted Thu 03/24/05: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:21 PM - i-com 200 problems (mike macleod) ________________________________ Message 1 _____________________________________ Time: 02:21:37 PM PST US From: mike macleod Subject: Pelican-List: i-com 200 problems --> Pelican-List message posted by: mike macleod Terry; Interesting problem. I had the reverse, lots of interference on my a4, then when I installed my a200 all problems went away. One thing though, I could hear the interference on the A4 but the receivers of my broadcast reported 5/5 with no interference. Is your radio shielded ok? Are there any gaps in the coax to the antenna? How did you ground the antenna? For my a200 I have one of those dipole antennas mounted inside the fuselage so it doesn't require grounding. For my transponder I ran a dedicated ground wire from the antenna ground plane to the engine to ensure that it was properly grounded. Do you have noise suppression/shielding in the ignition system? Mike PL C-FSVB