Today's Message Index:
----------------------
1. 07:42 PM - Re: Piet power on stalls (Ted Brousseau)
2. 07:47 PM - Re: Landing gear conversion (Ted Brousseau)
3. 08:18 PM - T-88 cleanup (DJ Vegh)
4. 09:08 PM - Re: T-88 cleanup (Richard Navratril)
Message 1
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Piet power on stalls |
--> Pietenpol-List message posted by: "Ted Brousseau" <nfn00979@naples.net>
Walt,
I decided to try a power stall on Saturday. I realized I had never done one
in the Piet. I am not sure I have anything useful to report. I pushed full
power and slowly pulled back. I can't tell you the angle of climb but it
felt a little like a rocket. Not speed - angle - don't get too excited. I
got it back to 40 mph and it didn't seem to want to stall. I think it
finally "stalled". Never fell off or anything definitive. Just hung there
and didn't seem to do anything.
I was flying on a short trip with another plane and didn't want to linger
too long so I dropped the nose and headed on. I had climbed 1000' while
trying to stall it. I will do more on another day when I have time to
experiment some more.
How was your experience?
Ted
----- Original Message -----
From: "walter evans" <wbeevans@worldnet.att.net>
Subject: Pietenpol-List: Piet power on stalls
> --> Pietenpol-List message posted by: "walter evans"
<wbeevans@worldnet.att.net>
>
> I've got 13 1/2 hours out of 25, and been thru alot,,,,did the slips, did
some wheel landings. All went well.
> Now on to stalls. The power off will not be a problem,(I think).
> But what is everyones experiences with power on stalls in the Piet??? Any
strange things that I need to know?
> At what speed does it break?
>
> Oh by the way, Thanks to all who gave advice on the rudder bar thing.
Turned out that the answer was more rudder response. I keep my heels off
the floor and do alot of toe dancing. And above all was to "stick" the
stick. got to make a point of full back stick, and hold it there to plant
the tail wheel for positive response ON the tailwheel.
> thanks,
> walt
> NX140DL
>
>
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Landing gear conversion |
--> Pietenpol-List message posted by: "Ted Brousseau" <nfn00979@naples.net>
I am thinking of converting from a split axle to a straight axle landing
gear. I already have the landing gear fuselage fittings installed for the
split axle. Does anyone see any problem of using them and building fittings
at the top of the straight axle gear that would have 5/16" pins attaching
them to the fuselage fittings just like the split axle gear?
Thanks for your thoughts,
Ted
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Pietenpol-List message posted by: "DJ Vegh" <aircamper@imagedv.com>
I have found the perfect cleaner for washing your hands and tools clean of
gooey T-88 resin.
Brake Parts cleaner.... get a spray can from your autoparts store and use
it to clean your hands and such after mixing up a batch. Cuts right through
and cleans perfectly!
Make sure you wash your hands with soap afterwards to rinse off the brake
cleaner.
DJ Vegh
N74DV
www.raptoronline.com
This email has been scanned for known viruses and made safe for viewing by Half Price Hosting, a leading email and web hosting provider. For more information on an anti-virus email solution, visit <http://www.halfpricehosting.com/av.asp>.
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: T-88 cleanup |
--> Pietenpol-List message posted by: "Richard Navratril" <horzpool@goldengate.net>
I dont know what kind of solvents are in brake parts cleaner but they may
not be too friendly. Many auto parts stores are now carrying Scrubs in a
Bucket. They are towletts with a degreasser. They remove the T-88 and are
safe on the skin.
Dick
----- Original Message -----
From: "DJ Vegh" <aircamper@imagedv.com>
Subject: Pietenpol-List: T-88 cleanup
> --> Pietenpol-List message posted by: "DJ Vegh" <aircamper@imagedv.com>
>
> I have found the perfect cleaner for washing your hands and tools clean of
> gooey T-88 resin.
>
> Brake Parts cleaner.... get a spray can from your autoparts store and
use
> it to clean your hands and such after mixing up a batch. Cuts right
through
> and cleans perfectly!
>
> Make sure you wash your hands with soap afterwards to rinse off the brake
> cleaner.
>
> DJ Vegh
> N74DV
> www.raptoronline.com
>
>
> This email has been scanned for known viruses and made safe for viewing by
Half Price Hosting, a leading email and web hosting provider. For more
information on an anti-virus email solution, visit
<http://www.halfpricehosting.com/av.asp>.
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|