Today's Message Index:
----------------------
1. 05:47 AM - data plates & re-hash (Oscar Zuniga)
2. 06:21 AM - UK site for metal Piet fittings (Michael D Cuy)
3. 07:13 AM - Re: data plates & re-hash (Doyle K. Combs)
4. 12:32 PM - Re: data plates & re-hash (w b evans)
Message 1
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | data plates & re-hash |
--> Pietenpol-List message posted by: "Oscar Zuniga" <taildrags@hotmail.com>
Howdy, folks; thanks for the excellent response to my data plate offer.
I'll be sending them out in the next day or three. I had 100 made up and
when those 100 are gone, they're gone... cuz I'll probably be in my 80's by
then and unable to fly the rocket-powered planes being flown by then (I'll
be 52 next month). I added one more picture on the webpage at
http://www.flysquirrel.net/piets/dataplate.html showing the new plate
alongside the previously-offered aluminum plate so you can see exactly what
you get (thanks, Doc).
And as far as re-hashing old topics, how's about the wire ferrules for the
empennage brace rods? I enjoyed that discussion. And in closing, if you
haven't looked at the pictures of Walt's Piet, be sure to. Really nice
airplane, and very exemplary work. The rudder bar modifications are towards
the last of the pictures but don't go there just for the rudder bar
pictures... it's all good.
Oscar Zuniga
San Antonio, TX
mailto: taildrags@hotmail.com
website at http://www.flysquirrel.net
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | UK site for metal Piet fittings |
--> Pietenpol-List message posted by: Michael D Cuy <Michael.D.Cuy@grc.nasa.gov>
stumbled across
this.......
http://images.google.com/imgres?imgurl=www.aviationmetalcraft.co.uk/images/acrosport1.jpg&imgrefurl=http://www.aviationmetalcraft.co.uk/productindex.htm&h=158&w=200&prev=/images%3Fq%3DPietenpol%26start%3D80%26svnum%3D10%26hl%3Den%26lr%3D%26ie%3DUTF-8%26oe%3DUTF-8%26sa%3DN
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: data plates & re-hash |
--> Pietenpol-List message posted by: "Doyle K. Combs" <dcombs@Ltex.net>
Oscar, I will take one. Email me the process for payment.
Doyle Combs
Box 421
Lometa, Texas 76853
----- Original Message -----
From: "Oscar Zuniga" <taildrags@hotmail.com>
Subject: Pietenpol-List: data plates & re-hash
> --> Pietenpol-List message posted by: "Oscar Zuniga"
<taildrags@hotmail.com>
>
> Howdy, folks; thanks for the excellent response to my data plate offer.
> I'll be sending them out in the next day or three. I had 100 made up and
> when those 100 are gone, they're gone... cuz I'll probably be in my 80's
by
> then and unable to fly the rocket-powered planes being flown by then (I'll
> be 52 next month). I added one more picture on the webpage at
> http://www.flysquirrel.net/piets/dataplate.html showing the new plate
> alongside the previously-offered aluminum plate so you can see exactly
what
> you get (thanks, Doc).
>
> And as far as re-hashing old topics, how's about the wire ferrules for the
> empennage brace rods? I enjoyed that discussion. And in closing, if you
> haven't looked at the pictures of Walt's Piet, be sure to. Really nice
> airplane, and very exemplary work. The rudder bar modifications are
towards
> the last of the pictures but don't go there just for the rudder bar
> pictures... it's all good.
>
> Oscar Zuniga
> San Antonio, TX
> mailto: taildrags@hotmail.com
> website at http://www.flysquirrel.net
>
>
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: data plates & re-hash |
--> Pietenpol-List message posted by: "w b evans" <wbeevans@verizon.net>
Oscar,
Thanks for the kind words.
walt
NX140DL
do not archive
----- Original Message -----
From: "Oscar Zuniga" <taildrags@hotmail.com>
Subject: Pietenpol-List: data plates & re-hash
> --> Pietenpol-List message posted by: "Oscar Zuniga"
<taildrags@hotmail.com>
>
> Howdy, folks; thanks for the excellent response to my data plate offer.
> I'll be sending them out in the next day or three. I had 100 made up and
> when those 100 are gone, they're gone... cuz I'll probably be in my 80's
by
> then and unable to fly the rocket-powered planes being flown by then (I'll
> be 52 next month). I added one more picture on the webpage at
> http://www.flysquirrel.net/piets/dataplate.html showing the new plate
> alongside the previously-offered aluminum plate so you can see exactly
what
> you get (thanks, Doc).
>
> And as far as re-hashing old topics, how's about the wire ferrules for the
> empennage brace rods? I enjoyed that discussion. And in closing, if you
> haven't looked at the pictures of Walt's Piet, be sure to. Really nice
> airplane, and very exemplary work. The rudder bar modifications are
towards
> the last of the pictures but don't go there just for the rudder bar
> pictures... it's all good.
>
> Oscar Zuniga
> San Antonio, TX
> mailto: taildrags@hotmail.com
> website at http://www.flysquirrel.net
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|