Today's Message Index:
----------------------
1. 09:49 AM - Re: prop (Leo Gates)
2. 08:01 PM - Re: prop (w b evans)
3. 08:03 PM - Wright Flyer show (w b evans)
4. 11:43 PM - Fin/Rudder Dimensions (Michael Green)
Message 1
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Pietenpol-List message posted by: Leo Gates <leogates@allvantage.com>
Richard Navratil wrote:
>--> Pietenpol-List message posted by: "Richard Navratil" <horzpool@goldengate.net>
>
>I was doing my engine test the other day and in the full power run I was able
to get 1900 rpm static run with an A-65 and a 72x42 prop. I expected a bit higher
rpm. Is this close to what others have gotten?
>Also reading thru materials from EAA on inspections they talk about a prop log.
I went out to the local FBO to buy one and the owner said he doesn't keep them
for J-3's and such, he just makes entries in the airframe log. Does the DAR
want to see a Prop log?
>Dick
>
>
My Talorcraft ( A65) turns 2150 stactic with a 73 X 44 McCauley Metal prop.
ACS sells a propeller log for $5.25.
Leo Gates
>
>
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Pietenpol-List message posted by: "w b evans" <wbeevans@verizon.net>
Dick,
My DAR never mentioned a prop log. Was only interested in prop serial
number, so the FAA would take a 25 hour phase 1 fly-off.
walt evans
NX140DL
----- Original Message -----
From: "Leo Gates" <leogates@allvantage.com>
Subject: Re: Pietenpol-List: prop
> --> Pietenpol-List message posted by: Leo Gates <leogates@allvantage.com>
>
> Richard Navratil wrote:
>
> >--> Pietenpol-List message posted by: "Richard Navratil"
<horzpool@goldengate.net>
> >
> >I was doing my engine test the other day and in the full power run I was
able to get 1900 rpm static run with an A-65 and a 72x42 prop. I expected a
bit higher rpm. Is this close to what others have gotten?
> >Also reading thru materials from EAA on inspections they talk about a
prop log. I went out to the local FBO to buy one and the owner said he
doesn't keep them for J-3's and such, he just makes entries in the airframe
log. Does the DAR want to see a Prop log?
> >Dick
> >
> >
> My Talorcraft ( A65) turns 2150 stactic with a 73 X 44 McCauley Metal
prop.
>
> ACS sells a propeller log for $5.25.
> Leo Gates
>
> >
> >
>
>
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Wright Flyer show |
HTML_MESSAGE
--> Pietenpol-List message posted by: "w b evans" <wbeevans@verizon.net>
Was watching a show tonite about building the Wright Flyer, and saw a Piet hanging
from the hanger ceiling behind.
walt evans
NX140DL
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Fin/Rudder Dimensions |
--> Pietenpol-List message posted by: Michael Green <mmml@bigpond.com>
Hi All,
I'm new to the list, but have been monitoring for the last couple of months. My
timber was shipped from the States today (being sent to Australia) so I'm eagerly
going over the plans ready to swing into action when it arrives.
I've decided to start with the tail group but noticed a descrepancy in the length
of the leading edge of the rudder, compared to the fin, horizontal stab and
tailpost. These three added togeather come up 1/2" short of the rudder leading
edge.
Is this normal ?
Mike Green
Romsey
Australia
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|