---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Sun 11/02/03: 15 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:01 AM - Flying Helmet (Isablcorky@aol.com) 2. 02:21 AM - Re: Flying Helmet (L&B hickman) 3. 05:42 AM - Re: Wire Wheel Hubs (Wizzard187@aol.com) 4. 07:16 AM - Re: Flying Helmet (DOUGLAS BLACKBURN) 5. 07:42 AM - Re: Wire Wheel Hubs (hjarrett) 6. 08:20 AM - Re: Wire Wheel Hubs (Jim Markle) 7. 11:30 AM - Wire Wheels (John Dilatush) 8. 12:05 PM - Re: Wire Wheel Hubs (At7000ft@aol.com) 9. 12:15 PM - Oil Pressure (Isablcorky@aol.com) 10. 01:48 PM - Re: Spoke Pattern was Wire Wheels (Michael Conkling) 11. 02:51 PM - Re: Oil Pressure (w b evans) 12. 03:14 PM - Re: Oil Pressure (Isablcorky@aol.com) 13. 06:53 PM - Cam clamp (Clif Dawson) 14. 08:35 PM - Re: Wire wheels (Christian Bobka) 15. 08:45 PM - Re: Flying Helmet (Christian Bobka) ________________________________ Message 1 _____________________________________ Time: 12:01:23 AM PST US From: Isablcorky@aol.com Subject: Pietenpol-List: Flying Helmet BAYES_70 (2.3 points) BODY": Bayesian.classifier.says.spam.probability.is.70.to.80@[score:0.7041] --> Pietenpol-List message posted by: Isablcorky@aol.com Pieters, There is an A/N surplus type store in Dallas that sells leather flying helmets. It is located near Northcentral Exp and Arapaho. Would anyone know the phone or mailing address? Thanks Corky in La flying with a knit cap that blows off my head on take off. ________________________________ Message 2 _____________________________________ Time: 02:21:01 AM PST US From: "L&B hickman" Subject: Re: Pietenpol-List: Flying Helmet --> Pietenpol-List message posted by: "L&B hickman" There's a place called flight world on I4 going from Datona to Orlando Fla. on my way to sun and fun.A DC9 sits along the highway as a marker or maybe you can find it on the net.They sell leather helmets lined for around 30.00 Linzy ----- Original Message ----- From: Bayesian.classifier.says.spam.probability.is.70.to.80@[score:0.7041]> Subject: Pietenpol-List: Flying Helmet > --> Pietenpol-List message posted by: Isablcorky@aol.com > > > Pieters, > > There is an A/N surplus type store in Dallas that sells leather flying > helmets. It is located near Northcentral Exp and Arapaho. Would anyone know the > phone or mailing address? Thanks > > Corky in La flying with a knit cap that blows off my head on take off. > > ________________________________ Message 3 _____________________________________ Time: 05:42:53 AM PST US From: Wizzard187@aol.com Subject: Re: Pietenpol-List: Wire Wheel Hubs --> Pietenpol-List message posted by: Wizzard187@aol.com Barry, I would like to be added to the list of those wanting the wire wheel plans. Ken Conrad wizzard 187 @aol.com thanks ________________________________ Message 4 _____________________________________ Time: 07:16:48 AM PST US From: "DOUGLAS BLACKBURN" Subject: Re: Pietenpol-List: Flying Helmet Seal-Send-Time: Sun, 2 Nov 2003 07:16:54 -0800 --> Pietenpol-List message posted by: "DOUGLAS BLACKBURN" Corky and others, This is an awesome site for all leather flying apparel. They have all original cut jackets ect. Goggles too!!!! http://www.flyingjacket.com/ Doug/Elizabeth Blackburn Yucaipa California www.inlandsloperebels.com W.W. conversion manual, #3202 www.flycorvair.com ----- Original Message ----- From: Isablcorky@aol.com To: pietenpol-list@matronics.com BAYES_70 (2.3 points) BODY : Bayesian.classifier.says.spam.probability.is.70.to.80@[score:0.7041] Sent: Saturday, November 01, 2003 9:59 AM Subject: Pietenpol-List: Flying Helmet --> Pietenpol-List message posted by: Isablcorky@aol.com Pieters, There is an A/N surplus type store in Dallas that sells leather flying helmets. It is located near Northcentral Exp and Arapaho. Would anyone know the phone or mailing address? Thanks Corky in La flying with a knit cap that blows off my head on take off. ________________________________ Message 5 _____________________________________ Time: 07:42:03 AM PST US From: "hjarrett" Subject: Re: Pietenpol-List: Wire Wheel Hubs --> Pietenpol-List message posted by: "hjarrett" I would like a copy of the info too. Maybe we should just post it. Hank J hjarrett@hroads.net ----- Original Message ----- From: Subject: Re: Pietenpol-List: Wire Wheel Hubs > --> Pietenpol-List message posted by: Wizzard187@aol.com > > Barry, I would like to be added to the list of those wanting the wire wheel > plans. > Ken Conrad wizzard 187 @aol.com > thanks > > ________________________________ Message 6 _____________________________________ Time: 08:20:03 AM PST US From: "Jim Markle" Subject: Re: Pietenpol-List: Wire Wheel Hubs --> Pietenpol-List message posted by: "Jim Markle" I agree Hank. So it's now posted at: http://www.mykitplane.com/Taxiway/TheHangar/photoAlbumManager.cfm?AlbumID=16 7 If that link fails (mine usually do....) try: http://www.mykitplane.com/Taxiway/TheHangar/pictureGallery.cfm If THAT fails, just go to mykitplane.com and view my photo albums....... Thanks Barry! Jim in Plano, where MY hubs are on the UPS truck ON THE WAY to Plano!!! Buchanan's will have them in a week or so and I'll have them back and powder coated (black) before I know it! WOOHOO!!!! > > I would like a copy of the info too. Maybe we should just post it. > Hank J > hjarrett@hroads.net > > ________________________________ Message 7 _____________________________________ Time: 11:30:21 AM PST US From: "John Dilatush" Subject: Pietenpol-List: Wire Wheels --> Pietenpol-List message posted by: "John Dilatush" Pieters, With all of the interest in using wire spoked wheels on the planes being built, it should be remembered that the Henderson plans call for a straight spoke pattern. The straight spoke pattern should be used for those planes NOT having brakes incorporated in the final design. A cross spoke pattern is better able to handle the rotational stress of brakes. John Dilatush NX114D Salida, Colorado ________________________________ Message 8 _____________________________________ Time: 12:05:43 PM PST US From: At7000ft@aol.com Subject: Re: Pietenpol-List: Wire Wheel Hubs --> Pietenpol-List message posted by: At7000ft@aol.com Please add me to the list as well, thank you very much. Rick Holland at7000ft@aol.com Barry, I would like to be added to the list of those wanting the wire wheel plans. ________________________________ Message 9 _____________________________________ Time: 12:15:40 PM PST US From: Isablcorky@aol.com Subject: Pietenpol-List: Oil Pressure --> Pietenpol-List message posted by: Isablcorky@aol.com Thanks Pieters, Just pumped a little oil through the flexible oil pressure hose holding it high. Started on the first pull. On idle throttle. Flew great in short sleeve La weather. Bleed your yankee hearts out. Corky in La flying in a T shirt on 2 Nov ________________________________ Message 10 ____________________________________ Time: 01:48:10 PM PST US From: "Michael Conkling" Subject: Re: Pietenpol-List:Spoke Pattern was Wire Wheels --> Pietenpol-List message posted by: "Michael Conkling" Model A wheels & some rear bicycle wheels use a cross pattern on the brake drum / drive side -- a radial (no cross) pattern on the opposite side. Also they are usually offset or "dished" (rim isn't centered on the hub) toward the cross pattern. Mike C. Pretty Prairie, KS ----- Original Message ----- From: "John Dilatush" Subject: Pietenpol-List: Wire Wheels > --> Pietenpol-List message posted by: "John Dilatush" > > Pieters, > > With all of the interest in using wire spoked wheels on the planes being built, it should be remembered that the Henderson plans call for a straight spoke pattern. > > The straight spoke pattern should be used for those planes NOT having brakes incorporated in the final design. A cross spoke pattern is better able to handle the rotational stress of brakes. > > John Dilatush NX114D > Salida, Colorado ________________________________ Message 11 ____________________________________ Time: 02:51:18 PM PST US From: "w b evans" Subject: Re: Pietenpol-List: Oil Pressure --> Pietenpol-List message posted by: "w b evans" Corky, Great! Don't want to break your bubble , but up in NJ, yesterday was great and today was greater!!! Very good shirt sleeve flying weather. Tomorrows predictions are for 80' ish. walt evans NX140DL PS A new seafood place just opened by me. HHHMMMMMM,,wonder if they have Gumbo? ( Gumbo should be capitalized, shouldn't it?) ----- Original Message ----- From: Subject: Pietenpol-List: Oil Pressure > --> Pietenpol-List message posted by: Isablcorky@aol.com > > Thanks Pieters, > > Just pumped a little oil through the flexible oil pressure hose holding it > high. Started on the first pull. On idle throttle. Flew great in short sleeve La > weather. Bleed your yankee hearts out. > > Corky in La flying in a T shirt on 2 Nov > > ________________________________ Message 12 ____________________________________ Time: 03:14:28 PM PST US From: Isablcorky@aol.com Subject: Re: Pietenpol-List: Oil Pressure --> Pietenpol-List message posted by: Isablcorky@aol.com Gumbo should be eaten. To hell with capitalization. ________________________________ Message 13 ____________________________________ Time: 06:53:43 PM PST US From: Clif Dawson Subject: Pietenpol-List: Cam clamp --> Pietenpol-List message posted by: Clif Dawson I've been asked about the cam clamp seen in some of my pics. Here it is at the bottom of this page. http://www.mykitplane.com/Planes/photoGalleryList2.cfm?AlbumID=27 ________________________________ Message 14 ____________________________________ Time: 08:35:48 PM PST US From: "Christian Bobka" Subject: Re: Pietenpol-List: Wire wheels --> Pietenpol-List message posted by: "Christian Bobka" Bud Smith knows what he is doing and is quite a resource. He has owned numerous machining companies through the years but is now retired. Hs is a real good guy. I spent lots of time with him last year at the SAA flyin at Urbana. I think Dennis E., Skipp Gadd, and Larry Williams may have met him as well. He was also a session guitarist in southern CA back during the surf years and has an extensive vintage guitar collection. We should try to get him to next year's brodhead. Chris bobka ----- Original Message ----- From: Subject: Pietenpol-List: Wire wheels > --> Pietenpol-List message posted by: Carbarvo@aol.com > > I had a conversation with Bud Smith recently. He's in Big Sandy, Texas and > has run an ad in the last three BPA Newsletters. He's found some sources of wire > wheels and he's making some hubs, using an abrasive water jet. That has less > adverse effect on 4130 than methods invvolving high temperatures. My > understanding is that he plans to make hubs available commercially.....Carl Vought > > ________________________________ Message 15 ____________________________________ Time: 08:45:07 PM PST US From: "Christian Bobka" Subject: Re: Pietenpol-List: Flying Helmet --> Pietenpol-List message posted by: "Christian Bobka" corky, send an email to jim markle. he lives right there. jim.markle@primus.com Or call my buddy, AA captian paul rosendahl. He lives right there. Just tell him chris told you to call him.. 972 231 1112 chris bobka ----- Original Message ----- From: Bayesian.classifier.says.spam.probability.is.70.to.80@[score:0.7041]> Subject: Pietenpol-List: Flying Helmet > --> Pietenpol-List message posted by: Isablcorky@aol.com > > > Pieters, > > There is an A/N surplus type store in Dallas that sells leather flying > helmets. It is located near Northcentral Exp and Arapaho. Would anyone know the > phone or mailing address? Thanks > > Corky in La flying with a knit cap that blows off my head on take off. > >