Today's Message Index:
----------------------
1. 04:22 AM - Re: Updated Web site (Peter W Johnson)
2. 07:10 AM - Re: capstrip and Gusset plates (john e fay)
3. 07:59 AM - Re: capstrip and Gusset plates (Kent Hallsten)
4. 08:33 AM - Re: Updated Web site (Ken & Lisa Rickards)
5. 12:29 PM - Re: Piets from LA to OAK (JamesJboyer@aol.com)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Updated Web site |
--> Pietenpol-List message posted by: "Peter W Johnson" <vk3eka@bigpond.net.au>
Thanks Guys,
All seems to be OK.
Cheers
Peter.
-----Original Message-----
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Gary Gower
Subject: Re: Pietenpol-List: Updated Web site
--> Pietenpol-List message posted by: Gary Gower <ggower_99@yahoo.com>
Peter,
Worked great here, beautiful project.
Saludos
Gary Gower
Do not archive.
--- Peter W Johnson <vk3eka@bigpond.net.au> wrote:
> --> Pietenpol-List message posted by: "Peter W Johnson"
> <vk3eka@bigpond.net.au>
>
> Hi Pieters,
>
> I have changed my domain name on the web site to
> http://www.cpc-world.com. I would be grateful if anybody could have a
> look and see if its working OK.
>
> Many thanks
>
> Peter
> Wonthaggi, Australia.
>
>
>
>
>
>
>
>
__________________________________
http://companion.yahoo.com/
advertising on the Matronics Forums.
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: capstrip and Gusset plates |
--> Pietenpol-List message posted by: john e fay <jefay@juno.com>
On Thu, 18 Dec 2003 16:26:28 -0500 "William Rives Young"
<wry22@drexel.edu> writes:
> --> Pietenpol-List message posted by: "William Rives Young"
> <wry22@drexel.edu>
>
> I am getting ready to try and start making my wing ribs again.
If my memory serves, you only need a 2' X 4' piece of 1/16" ply to make
all of the gussets for the ribs.
John in Peoria
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | capstrip and Gusset plates |
--> Pietenpol-List message posted by: "Kent Hallsten" <KHallsten@Governair.com>
> > I am getting ready to try and start making my wing ribs again.
>
> If my memory serves, you only need a 2' X 4' piece of 1/16"
> ply to make
> all of the gussets for the ribs.
>
> John in Peoria
>
>
John,
I needed a bit more than that, like another piece half that size. Also I cut
my gussets square, and rectangular, with a paper cutter and tin snips. I think
that would save some material over cutting them in a circular design. You'll
find other places to use 1/16" ply on the Piet so order 2 pieces 2' x 4' and
save on the shipping
Kent
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Updated Web site |
--> Pietenpol-List message posted by: "Ken & Lisa Rickards" <KL0914@cogeco.ca>
Site works and looks great.
Ken
GN1 2992
In Sunny Ontario, Canada
----- Original Message -----
From: "Peter W Johnson" <vk3eka@bigpond.net.au>
Subject: Pietenpol-List: Updated Web site
> --> Pietenpol-List message posted by: "Peter W Johnson"
<vk3eka@bigpond.net.au>
>
> Hi Pieters,
>
> I have changed my domain name on the web site to http://www.cpc-world.com.
I
> would be grateful if anybody could have a look and see if its working OK.
>
> Many thanks
>
> Peter
> Wonthaggi, Australia.
>
>
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Piets from LA to OAK |
--> Pietenpol-List message posted by: JamesJboyer@aol.com
Hello Javier,
If you feel like an extra drive about 60 miles North of Oakland/San
Francisco; feel welcome to come and look over my Piet in Santa Rosa.
I have all wood structures done except for wing assembly, have 100+ steel
parts, and have all Corvair engine parts now to start final cleaning of engine
case prior to engine assembly. I hope to attend the California Corvair College
in January and assemble my engine there.
If you want to come another 60 miles North just say so and will give you
directions to my place.
Cheers, Jim
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|