---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Sun 04/04/04: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:34 AM - Re: It's official (TomTravis@aol.com) 2. 09:27 AM - Re: It's official (DJ Vegh) 3. 01:15 PM - Need a little help (Norman Stapelberg) 4. 02:11 PM - Corvair parts FS (William Koucky) ________________________________ Message 1 _____________________________________ Time: 07:34:46 AM PST US From: TomTravis@aol.com Subject: Re: Pietenpol-List: It's official Congratulations! Tom Travis ________________________________ Message 2 _____________________________________ Time: 09:27:54 AM PST US From: "DJ Vegh" Subject: Re: Pietenpol-List: It's official much to the chagrin of some on the list when it comes to "way to go's", I'll still provide my input...... Way to go!! Excellent news!! Post up some pics on the photoshare. DJ Vegh N74DV Mesa, AZ www.imagedv.com/aircamper - ----- Original Message ----- From: Richard Navratil To: pietenpol-list@matronics.com Sent: Saturday, April 03, 2004 5:54 PM Subject: Pietenpol-List: It's official After a very thorough going over by 2 inspectors today, I have my airworthiness certificate. It's reaaly a Pietenpol, finally. Dick N. do not archive ________________________________ Message 3 _____________________________________ Time: 01:15:57 PM PST US From: "Norman Stapelberg" Subject: Pietenpol-List: Need a little help Pieters, I am busy doing the rigging of the elevator and rudder, no where can I find what the travel should be, need to know the elevator up and down deflexion in degrees/ inches as well as for the rudder left/ right. Waiting for the spare from AS&S then I have to cover the fuselage and then assemble. Thanks in advance Norman Stapelberg ZS-VJA (rebuilding) ________________________________ Message 4 _____________________________________ Time: 02:11:31 PM PST US From: "William Koucky" Subject: Pietenpol-List: Corvair parts FS I have many Corvair parts for sale, block, cam, crank, 4 heads (cleaned), oil coolers, old pistons/ rods.110hp. Make offer, I live in Michigan. All the parts are apart and unassembled. I had two complete engines and additional heads. I competed one and this is the parts from the other. I was building to Wynnes plans and I think all the parts work with his 110 conversion. I can't guarantee the quality of these parts because the first engines parts were the ones I used and I never checked these parts but they all seem good. Pistons and rings are for core replacement. William Koucky