Today's Message Index:
----------------------
1. 06:32 AM - Landing gear "misalignment" question.... (Jim Markle)
2. 07:03 AM - searching for Pietenpol people (Oscar Zuniga)
3. 07:15 AM - Thanks for the help!!! : Landing gear "misalignment" question.... (Jim Markle)
4. 01:47 PM - correction for the Sussex EAA fly-in (walt evans)
5. 04:16 PM - Re: Searching for Pietenpol People (Kip and Beth Gardner)
6. 07:44 PM - Re: Searching for Pietenpol People (Christian Bobka)
7. 08:29 PM - Re: Searching for Pietenpol People (Peter W Johnson)
8. 09:46 PM - G-BUCO's email address (Christian Bobka)
9. 10:34 PM - Re: Tolerances and T-88 (john e fay)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
"Piet - Larry Williams" <lnawms@msn.com>, <Michael.D.Cuy@grc.nasa.gov>
Subject: | Landing gear "misalignment" question.... |
I'm having trouble figuring out how to get the ash piece lined up with the spruce
"V" pieces on my straight axle landing gear.
I aligned the ash piece with the centerline of the fuse but it looks like that
makes it misalign with the rest of the gear. Maybe I should "move it out" to align
with the spruce V's? That would probably look better but if I leave it as
is, I can do some trimming and blend it all in..... It looks like I could do
a bit of trimming to the spruce pieces and get their edges to line up then "toe
out" the ash piece......I believe the integrity of the intersection would
be maintained....esthetically it might look strange though....just don't know....
Can someone tell me if you just trim and cut and sand to fit or move the ash piece
out to where it aligns with the spruce vertical V pieces or what????
Anyone have some ideas on my problem (if it really is a problem) or do I just need
to "trim to fit"?
Thanks!
JM
(I cropped the picture a LOT to avoid confusing anyone with any of the strange
items in my workshop.........)
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | searching for Pietenpol people |
--> Pietenpol-List message posted by: "Oscar Zuniga" <taildrags@hotmail.com>
Holy smokes, Chuck! That is one heck of a list you've got there. A few
names there I recognize:
Fletcher Burns is fletcher@ultravair.com and (unless there are more than one
"Fletcher Burns"), is the person who developed and is flying the 1/3 Corvair
"UltraVair" engine... but not on a Piet. Ernie Moreno is
ewmoreno@worldnet.att.net and still has his Piet up in Independence, OR
(although the Franklin engine on it is unairworthy). And Carl Loar was
skycarl@core.com last I heard. His Corvair-powered Piet should have already
been flying? And a bunch of other familiar names on the list, but not sure
many of them have email or are on this list.
Oscar Zuniga
San Antonio, TX
mailto: taildrags@hotmail.com
website at http://www.flysquirrel.net
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Thanks for the help!!! : Landing gear "misalignment" |
question....
I just love the way some answers become SO obvious when you talk through them....and
get some really good help from people on this list! What a terrific resource.....
Thanks! (I'll angle the ash piece back in toward the tail, duh....an obvious solution
now that I look at it!!)
JM
----- Original Message -----
From: Jim Markle
To: pietenpol-list@matronics.com ; Clif Dawson ; Piet - Larry Williams ; Michael.D.Cuy@grc.nasa.gov
Sent: Wednesday, May 12, 2004 8:28 AM
Subject: Pietenpol-List: Landing gear "misalignment" question....
I'm having trouble figuring out how to get the ash piece lined up with the spruce
"V" pieces on my straight axle landing gear.
I aligned the ash piece with the centerline of the fuse but it looks like that
makes it misalign with the rest of the gear. Maybe I should "move it out" to
align with the spruce V's? That would probably look better but if I leave it
as is, I can do some trimming and blend it all in..... It looks like I could
do a bit of trimming to the spruce pieces and get their edges to line up then
"toe out" the ash piece......I believe the integrity of the intersection would
be maintained....esthetically it might look strange though....just don't know....
Can someone tell me if you just trim and cut and sand to fit or move the ash
piece out to where it aligns with the spruce vertical V pieces or what????
Anyone have some ideas on my problem (if it really is a problem) or do I just
need to "trim to fit"?
Thanks!
JM
(I cropped the picture a LOT to avoid confusing anyone with any of the strange
items in my workshop.........)
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | correction for the Sussex EAA fly-in |
I had mantioned in one of my posts that the Sussex NJ EAA fly-in was this sunday.
Wrong! Meant to say Warwick NY was on 5-16
walt evans
NX140DL
do not archive
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
<003f01c437d3$603f3a00$0301a8c0@Domain>
Subject: | Re: Searching for Pietenpol People |
--> Pietenpol-List message posted by: Kip and Beth Gardner <kipandbeth@earthlink.net>
At 10:44 PM -0500 5/11/04, Christian Bobka wrote:
>--> Pietenpol-List message posted by: "Christian Bobka" <sbobka@charter.net>
>
>Chuck,
>
>Duane Duea on your list is eastofLA@aol.com . He has a Corvair powered Piet
>that he built years ago and flies it regularly out of Faribault, MN where I
>am based.
>
>Ron Bloomquist on your list is bloomvintageaero@charter.net and should be
>current
>
>Josh Harel (note the correct spelling of the last name) on your list is
>jharel@servusa.com and should be current
>
>Mike Brusilow is mb-albany@worldnet.att.net although this may be old.
Hi Chuck,
A couple of names I can tell you about.
Frank Pavliga does not make his e-mail public. His mailing address
has also changed as he recently moved.
Wil Graff still has his Piet based here in OH at Wadsworht Muni.
Kerri Ann Price maintains a web site where she markets her various
Piet modification plans. I think she sold her Piet.
I will check with Wil & Frank the next time I see them & find out if
they want to be on your list.
I bought Paul Sherman's project, so you can drop him from your list.
I promise I'm going to submit my project info one of these days!
Chris Bobka - My brother lives & teaches in Fairbault, maybe we can
link up with your Piet friend the next time I'm up for a visit. BTW,
any idea when you might be going to NJ to pick up lift struts at
Walt's airport?
--
North Canton, OH
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Searching for Pietenpol People |
--> Pietenpol-List message posted by: "Christian Bobka" <sbobka@CHARTER.NET>
ARe the Piet list members from England still up on the list? G-BUCO?
I am going to England in July for 10 days to go to the 1930's Air Day at Old
Warden as well as the PFA Rally in Kemble. I was hoping to catch up with
them.
chris
----- Original Message -----
From: <Rcaprd@aol.com>
Subject: Pietenpol-List: Searching for Pietenpol People
> --> Pietenpol-List message posted by: Rcaprd@aol.com
>
> Group,
> I'm still trying to contact everyone I can, to see if they would like to
be
> included in the 'Pietenpol Infomation List'. I got most of these names
from
> Doc Mosher's 'Pietenpol Owner Directory'. It's a long list. Please
e-mail me
> direct, if you know the e-mail address of any of these people.
>
> Names I need e-mail for:
> Dick Alkire
> Mark Anderson
> Ken Anderson
> Raffaele (Domenic) Bellissimo
> Tom Brown
> William Conway
> Tim Cunningham
> Owen Davies
> Richard DeCosta
> Bill Emo
> DL Grammont
> John Greenlee
> Dennis Hall
> Jeff Hill
> Chad Johnson
> Ron Kaser
> Brian Kenny
> Jim Kensella
> Bill Knight
> John Langston
> michael list
> Frank Lowell
> Jim Malley
> Tim Mickle
> Paul Morton
> Larry Neal
> Frank Pavliga
> Matt Paxton
> Kyle Ray
> J R Reber
> Bill Rewey
> Lee Schiek
> David B. Schober
> Bob Seibert
> Warren Shoun
> Brad Schultz
> Mehlin Smith
> Hank Stein
> Randy Stockberger
> Alan Swanson
> Bill Talbert
> Duane woolsey
> Leo Powning
> Simon MacCormack
> Doug Reeve
> Doug CGCGJ
> Garth Upton
> Leo Ponton
> Claude Plathey
> James V Vahary
> Mike Lisenbra
> Scott Liefield
> Richard W Franklin
> Michael A Jewett
> Carl R Adams
> Thomas e. Bowdler
> Earl M. Klebs
> John Davolt
> Warren Timmerman
> Leroy D. Swenson
> Jim Hampton
> Gary McArthur
> Robert H. Meier
> Richard C. Kohm
> Robert H. Meier
> Manuel Sparks
> Blane E. Tower
> Jerry Fogg
> Steven T. Miller
> Harry J. Winslow
> Willard Talley
> Lewis Jennings
> Marvin Grout
> William C. Hooper
> Mehlin B. Smith
> Lester M. Talent
> Clarence Salmon
> Douglas P. Rohde
> Bud C. Johnson
> Jobeth Barrett
> Don B. Brooks
> Thomas N. Terning
> Robert D. Bell
> Peter Smith
> Stephen C. Bowman
> Donald H. Reynolds
> Edward M. Strackbein
> Hayden Gildersleeve
> A. P. Hurst
> J. V. Mesdag
> James K. Stark Jr.
> Tilman Thomas Jr.
> Dennis Hall
> Clifford Kumm
> Robert L. Linton
> Kevin T. McDonald
> William O. Smith
> Randy W. Wieden
> John D. Killian
> Wilbur C. Graff
> Howard B. Twibell
> Paul E. Roy
> Peter L. Korwin
> Thomas Reedy
> Edward M. Sampson
> Vintage Aviation Services Inc.
> Terry Brandt
> Albert E. Koons
> Mark A. Anderson
> Sylvester K. Heller
> Hans C. Egsgaard
> John L. Kerr
> Cass County Historical Society
> Museum of the Rockies
> 12937 EAA
> Edward M. Sampson
> Vitalis Kapler
> Larry & Ilse Harmacinski
> Airpower Museum Inc.
> Walter C. Bowe
> James F. Hammond
> Jack M. Maki
> John H. Shoemaker
> David Rezin
> John J. Felton
> James O. Potter
> Donald F. Buckman
> James J. Dean
> David O. Harris
> Gary Baglien
> Lonnie L. Tucker
> Air Museum City of Liberal
> William E. Borie
> Milestones of Flight Museum
> Zara H. Royal
> Marshall D. Welch
> William J. Marshall
> Maurice T. Way
> Gary M. Gingrich
> Kevin L. Helf
> Handy D. Gilbert
> Lowell J. Durham
> Lawrence D. Becker
> Bradford Schultz
> Fletcher A. Burns
> Derry D. Dettmer
> Ernie W. Moreno
> Rodney C. Eig
> Richard P. Alkire
> Steven C. Mourer
> James W. Wallace
> Edward M. Popejoy
> Christopher Jacobs
> Larry Harrison
> Eugene L. Hershey
> Gene W. Hoffman
> William E. VanHorn
> Joseph F. Sheble III
> Fred H. Dexter
> Herbert J. Townsend
> Wayne D. Lord
> Richard I. Hill
> Donald P. Campbell
> Michael E. Holcomb
> Donald H. Walter
> J. R. Reber
> Pete Pittinger
> Merle Smith
> Warren Simpson
> James Ballew
> Flying Dutchman Inc. (Ted Brousseau)
> Tom H. Mathes
> Wilbur C. Volker
> David W. Doherty
> Donald R. Doherty
> William S. Doherty
> Paul S. DiMascio
> Kenneth Perkins
> Paul F. Hamilton
> Texas Air Museum
> Robert L. Ross
> Gene E. Martinson
> William J. Masson
> Art Holiman
> Kerri Ann Prict
> David G. Briers
> Edward J. Snyder
> William F. McKee
> James W. Tillery
> Alva A. Owen
> Mitchel J. Burns
> Hiller Aviation Museum
> Sue Wayne
> Thomas H. Lubben
> David A. Beckett
> Joseph Sexton
> Ray Fanchamps
> Phillip T. Kapp
> Allan J. Wise
> Travis M. Gregory
> Kelly D. Tippetts
> Kim Stricker
> Van R. Weinman
> August A. Draffkorn
> Joseph Vinciquarra
> H. J. Judkins
> Charles D. VanWalker
> Paul G. Castine
> Ronald C. VanKnowe
> Dennis Davitt
> Harold Straw
> Alex P. Whitmore Jr.
> H & N Aero Inc. (Bill Davis
> Eaton C. Green
> Mike Williams
> Thomas L. Brown
> Felix Quast
> Richard Hatch
> B. J. Powell
> William J. Pratt
> Terry A. Richardson
> John W. Watson
> Gilbert D. McKessy
> Rick L. Anderson
> Joseph W. Santana
> Edward R. Mason
> Liberty Flying Service Inc.
> John D. Puent
> Lowell C. Frank
> Carl J. Pitcher
> Jack B. Singer
> Evertt G. Downey
> Jan B. Mock
> Monte M. Miller
> Antique Airplane Corp. (Robt Taylor)
> Charles H. Smith
> Peter Kesling
> Larry R. Pasley
> David S. Adams
> Daniel B. Benner
> Sam Bruce
> Ronnie L. Johnston
> Robert E. Lipper
> Kyle R. Bradford
> Gordon W. Glodo
> Melvin D. Marquette
> Donald L. Mains
> Robert L. Cozine
> Jesse C. Enke III
> Jim Malley
> Warren C. Weisenbach
> EAA Ch 37
> Doug T. Rounds
> Ted E. Davis
> Mehlin B. Smith
> Gary Karner
> Don Grubbs
> Carl Loar
> Gregory L. Utley
> Richard L. Berstling
> John R. Wolf
> John H. Simpson
> Sanford W. Love
> Paul E. Sherman
> Samuel F. Hambleton
> Gary A. Norton
> Wayne T. Norton
> Donald W. Halloran
> Kenneth M. Dilks
> Ryder Olsen
> Edward F. Ripplinger
> Lawrence A. Cowell
> Michael G. Kimbrel
> Roger F. Love
> William B. Duncan
> Paul D. Dougherty
> James R. Brukeen
> Howard Holman
> Wilbur C. Johnson
> Dale A. Calchuff
> Frederick M. Gleiter
> Ron Vanderhart
> David R. Karren
> Andy Anderson
> Phil J. Rutten
> Joseph Fedelem
> Jerry G. Standing
> Daniel C. Cork Jr.
> Robert Komishock
> Glen L. Hepner
> Joseph m. Czaplicki
> Elinor Elg-Jones
> James T. Wren
> Donald W. Patrick
> James W. Goodwin
> David C. Gerbitz
> Duane E. Merchant
> C. Gordon Amudson
> Lance S. Fleming
> Duane R. Duea
> Alex Fasolili
> William D. Rowe
> V. R. Davis Arista J. Smith
> Joseph P. Orlando
> Thurman M. Luxford
> Five Aces, Inc.
> Alan Bergren
> Bud Rhodes
> Fred Johnson
> Donald R. Brenner
> Joann S. Painter
> Weneth D. Painter
> Arthur L. Millay
> Walter A. Beyer
> Ray R. Martin
> Robert D. DePratti Jr.
> Roger White
> Jimmy J. Davenport
> Loyd H. Shropshire
> C & S Engineering Co. (Hohn Paul Gagnon)
> Richard M. West
> Ronald H. Elliott
> Noel Quinones
> Steven O'Donnell
> Kevin P. Hueser
> Jack Deibert
> David J. Anderson
> Donald R. Brewer
> Daniel T. Towery
> Andrew Zammetti
> Michael Brusilow
> David L. Cleveland
> Patrick W. Rose
> William J. Haynes B & W Enterprises
> Daniel J. Taylor
> Leonard A. Brooks
> Air & Sea
> Craig R. Lawler
> Jay Bosch
> John E. McCarthy
> Jim A. Sury
> George Skistmas
> William D. Rowe
> Duane Stockton
> Loyd J. Cox
> Michael J. Troy
> Brian J, Herreman
> John Haavisto
> Dennis Vetter
> Chester Davis
> William A. Lange Jr.
> Siegfried Werners
> John I. Warren
> Jerry L. Logan
> Theordore J Myers
> Harley A. Dahler
> Peter W. Schiffel
> David Karren
> Henry C. Hays
> Mike King
> Bill R. Preece
> Fred T Schmucker
> Martin A Vandenbrock
> Frank Dilman
> Jim Kinsella
> Dwayne D. Tulba
> Robert H. Greenwall
> David D. Petrocsko
> Joe Gibson
> Leon W. Slocum
> Jefferson H. Triplett
> Larry D. Harrison
> Bill Poiry
> Robert M. Hubbard
> Gail Acrft Engrg Co.
> Timothy W. Sefcik
> Harvey Planes LLC
> Lavaun M. Raaf
> Richard D. Tichy
> Lewis A Jennings
> Joseph Farkas
> William S. Knight
> Richard M. Carpenter
> John L. Overholser
> Joyce A. Hunt
> Harry K. Olsson
> Allan Mirkin
> Andrew C. Pietenpol
> James O Kearns
> Robin J. Passley
> Ryan G. Shepherd
> Don Schexnayder
> EAA Chapter 827
> Stephen Miller
> Thomas E. Bowdler
> Robert S. Nevin Jr.
> Thomas P. Paiement
> Richard Farwell
> Dream Aircraft Inc. (Clyde Buckley)
> Brad R. Schultz
> Craig R. Lawler
> Warren D. Bliss
> Deward D. Peterson
> David E. Jones
> Richard E. Wood
> Edward L. Sigman
> Maryann Dunn
> John M. Greenlee
> Joseph T. Kohler
> Ronald L. Jansen
> Melvin Green
> Theodore H. Bradley
> Tim Cunningham
> Thomas E. Fahy
> Dennis J. Heiny
> James E. Marshall
> Feffrey L. Austin
> Regis J. Fisher
> James L. Belknap
> Thomas A. Baker
> Robert H. Miller
> Lawrence C. Kropp
> Rodney L. Schrader
> Elmer C. Church
> Walter I. Groskurth
> Harold N. Downing
> Arch L. Howard
> Donald E. Meagher
> Thomas J. Young
> Ronald D. Bloomquist
> James R. Carr
> Virl B. Deal
> John E. Emmerson
> James E. Emmerson
> Freddie G. Emmerson
> Kevin Ross
> Daniel Patterson
> Quonset Air Museum
> Brian W. Swanson
> Charles E. Rubeck
> Cecil E. Boyd Jr.
> Ernest M. Bridgers
> Loyd R. Brents
> Malcom D. Muir
> Robert Bozeman
> Carroll G. Allen
> Joseph Leonard
> Donald Campbell
> Elaine C. Roehrig
> Joshua Harrel
> Floyd E. Shewmaker Jr.
> Richard L. Barfield
> Timothy TrueWalter Fuller
> Frederick F. Baker
> Jerome E. Hahn
> Virgil J. Phillips
> Science Museum of Virginia
> George A. Grant
> Robert E. Kamerman
> David L. Wheatley
> Larry & Julie Robbins
> Mark A. Anderson
> Mack A. Buswell
> Gary M. Goodman
> David A. Atnip
> David O. Thompson
> Edward M. Strackbein
> James T. Vandervort
> Charles B. Kile
>
>
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Searching for Pietenpol People |
--> Pietenpol-List message posted by: "Peter W Johnson" <vk3eka@bigpond.net.au>
Chris,
Check out http://www.pietenpolclub.co.uk/, go to builders list. They are all
there.
Cheers
Peter
Wonthaggi, Australia.
http://www.cpc-world.com
-----Original Message-----
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Christian
Bobka
Subject: Re: Pietenpol-List: Searching for Pietenpol People
--> Pietenpol-List message posted by: "Christian Bobka" <sbobka@CHARTER.NET>
ARe the Piet list members from England still up on the list? G-BUCO?
I am going to England in July for 10 days to go to the 1930's Air Day at Old
Warden as well as the PFA Rally in Kemble. I was hoping to catch up with
them.
chris
----- Original Message -----
From: <Rcaprd@aol.com>
Subject: Pietenpol-List: Searching for Pietenpol People
> --> Pietenpol-List message posted by: Rcaprd@aol.com
>
> Group,
> I'm still trying to contact everyone I can, to see if they would like to
be
> included in the 'Pietenpol Infomation List'. I got most of these names
from
> Doc Mosher's 'Pietenpol Owner Directory'. It's a long list. Please
e-mail me
> direct, if you know the e-mail address of any of these people.
>
> Names I need e-mail for:
> Dick Alkire
> Mark Anderson
> Ken Anderson
> Raffaele (Domenic) Bellissimo
> Tom Brown
> William Conway
> Tim Cunningham
> Owen Davies
> Richard DeCosta
> Bill Emo
> DL Grammont
> John Greenlee
> Dennis Hall
> Jeff Hill
> Chad Johnson
> Ron Kaser
> Brian Kenny
> Jim Kensella
> Bill Knight
> John Langston
> michael list
> Frank Lowell
> Jim Malley
> Tim Mickle
> Paul Morton
> Larry Neal
> Frank Pavliga
> Matt Paxton
> Kyle Ray
> J R Reber
> Bill Rewey
> Lee Schiek
> David B. Schober
> Bob Seibert
> Warren Shoun
> Brad Schultz
> Mehlin Smith
> Hank Stein
> Randy Stockberger
> Alan Swanson
> Bill Talbert
> Duane woolsey
> Leo Powning
> Simon MacCormack
> Doug Reeve
> Doug CGCGJ
> Garth Upton
> Leo Ponton
> Claude Plathey
> James V Vahary
> Mike Lisenbra
> Scott Liefield
> Richard W Franklin
> Michael A Jewett
> Carl R Adams
> Thomas e. Bowdler
> Earl M. Klebs
> John Davolt
> Warren Timmerman
> Leroy D. Swenson
> Jim Hampton
> Gary McArthur
> Robert H. Meier
> Richard C. Kohm
> Robert H. Meier
> Manuel Sparks
> Blane E. Tower
> Jerry Fogg
> Steven T. Miller
> Harry J. Winslow
> Willard Talley
> Lewis Jennings
> Marvin Grout
> William C. Hooper
> Mehlin B. Smith
> Lester M. Talent
> Clarence Salmon
> Douglas P. Rohde
> Bud C. Johnson
> Jobeth Barrett
> Don B. Brooks
> Thomas N. Terning
> Robert D. Bell
> Peter Smith
> Stephen C. Bowman
> Donald H. Reynolds
> Edward M. Strackbein
> Hayden Gildersleeve
> A. P. Hurst
> J. V. Mesdag
> James K. Stark Jr.
> Tilman Thomas Jr.
> Dennis Hall
> Clifford Kumm
> Robert L. Linton
> Kevin T. McDonald
> William O. Smith
> Randy W. Wieden
> John D. Killian
> Wilbur C. Graff
> Howard B. Twibell
> Paul E. Roy
> Peter L. Korwin
> Thomas Reedy
> Edward M. Sampson
> Vintage Aviation Services Inc.
> Terry Brandt
> Albert E. Koons
> Mark A. Anderson
> Sylvester K. Heller
> Hans C. Egsgaard
> John L. Kerr
> Cass County Historical Society
> Museum of the Rockies
> 12937 EAA
> Edward M. Sampson
> Vitalis Kapler
> Larry & Ilse Harmacinski
> Airpower Museum Inc.
> Walter C. Bowe
> James F. Hammond
> Jack M. Maki
> John H. Shoemaker
> David Rezin
> John J. Felton
> James O. Potter
> Donald F. Buckman
> James J. Dean
> David O. Harris
> Gary Baglien
> Lonnie L. Tucker
> Air Museum City of Liberal
> William E. Borie
> Milestones of Flight Museum
> Zara H. Royal
> Marshall D. Welch
> William J. Marshall
> Maurice T. Way
> Gary M. Gingrich
> Kevin L. Helf
> Handy D. Gilbert
> Lowell J. Durham
> Lawrence D. Becker
> Bradford Schultz
> Fletcher A. Burns
> Derry D. Dettmer
> Ernie W. Moreno
> Rodney C. Eig
> Richard P. Alkire
> Steven C. Mourer
> James W. Wallace
> Edward M. Popejoy
> Christopher Jacobs
> Larry Harrison
> Eugene L. Hershey
> Gene W. Hoffman
> William E. VanHorn
> Joseph F. Sheble III
> Fred H. Dexter
> Herbert J. Townsend
> Wayne D. Lord
> Richard I. Hill
> Donald P. Campbell
> Michael E. Holcomb
> Donald H. Walter
> J. R. Reber
> Pete Pittinger
> Merle Smith
> Warren Simpson
> James Ballew
> Flying Dutchman Inc. (Ted Brousseau)
> Tom H. Mathes
> Wilbur C. Volker
> David W. Doherty
> Donald R. Doherty
> William S. Doherty
> Paul S. DiMascio
> Kenneth Perkins
> Paul F. Hamilton
> Texas Air Museum
> Robert L. Ross
> Gene E. Martinson
> William J. Masson
> Art Holiman
> Kerri Ann Prict
> David G. Briers
> Edward J. Snyder
> William F. McKee
> James W. Tillery
> Alva A. Owen
> Mitchel J. Burns
> Hiller Aviation Museum
> Sue Wayne
> Thomas H. Lubben
> David A. Beckett
> Joseph Sexton
> Ray Fanchamps
> Phillip T. Kapp
> Allan J. Wise
> Travis M. Gregory
> Kelly D. Tippetts
> Kim Stricker
> Van R. Weinman
> August A. Draffkorn
> Joseph Vinciquarra
> H. J. Judkins
> Charles D. VanWalker
> Paul G. Castine
> Ronald C. VanKnowe
> Dennis Davitt
> Harold Straw
> Alex P. Whitmore Jr.
> H & N Aero Inc. (Bill Davis
> Eaton C. Green
> Mike Williams
> Thomas L. Brown
> Felix Quast
> Richard Hatch
> B. J. Powell
> William J. Pratt
> Terry A. Richardson
> John W. Watson
> Gilbert D. McKessy
> Rick L. Anderson
> Joseph W. Santana
> Edward R. Mason
> Liberty Flying Service Inc.
> John D. Puent
> Lowell C. Frank
> Carl J. Pitcher
> Jack B. Singer
> Evertt G. Downey
> Jan B. Mock
> Monte M. Miller
> Antique Airplane Corp. (Robt Taylor)
> Charles H. Smith
> Peter Kesling
> Larry R. Pasley
> David S. Adams
> Daniel B. Benner
> Sam Bruce
> Ronnie L. Johnston
> Robert E. Lipper
> Kyle R. Bradford
> Gordon W. Glodo
> Melvin D. Marquette
> Donald L. Mains
> Robert L. Cozine
> Jesse C. Enke III
> Jim Malley
> Warren C. Weisenbach
> EAA Ch 37
> Doug T. Rounds
> Ted E. Davis
> Mehlin B. Smith
> Gary Karner
> Don Grubbs
> Carl Loar
> Gregory L. Utley
> Richard L. Berstling
> John R. Wolf
> John H. Simpson
> Sanford W. Love
> Paul E. Sherman
> Samuel F. Hambleton
> Gary A. Norton
> Wayne T. Norton
> Donald W. Halloran
> Kenneth M. Dilks
> Ryder Olsen
> Edward F. Ripplinger
> Lawrence A. Cowell
> Michael G. Kimbrel
> Roger F. Love
> William B. Duncan
> Paul D. Dougherty
> James R. Brukeen
> Howard Holman
> Wilbur C. Johnson
> Dale A. Calchuff
> Frederick M. Gleiter
> Ron Vanderhart
> David R. Karren
> Andy Anderson
> Phil J. Rutten
> Joseph Fedelem
> Jerry G. Standing
> Daniel C. Cork Jr.
> Robert Komishock
> Glen L. Hepner
> Joseph m. Czaplicki
> Elinor Elg-Jones
> James T. Wren
> Donald W. Patrick
> James W. Goodwin
> David C. Gerbitz
> Duane E. Merchant
> C. Gordon Amudson
> Lance S. Fleming
> Duane R. Duea
> Alex Fasolili
> William D. Rowe
> V. R. Davis Arista J. Smith
> Joseph P. Orlando
> Thurman M. Luxford
> Five Aces, Inc.
> Alan Bergren
> Bud Rhodes
> Fred Johnson
> Donald R. Brenner
> Joann S. Painter
> Weneth D. Painter
> Arthur L. Millay
> Walter A. Beyer
> Ray R. Martin
> Robert D. DePratti Jr.
> Roger White
> Jimmy J. Davenport
> Loyd H. Shropshire
> C & S Engineering Co. (Hohn Paul Gagnon)
> Richard M. West
> Ronald H. Elliott
> Noel Quinones
> Steven O'Donnell
> Kevin P. Hueser
> Jack Deibert
> David J. Anderson
> Donald R. Brewer
> Daniel T. Towery
> Andrew Zammetti
> Michael Brusilow
> David L. Cleveland
> Patrick W. Rose
> William J. Haynes B & W Enterprises
> Daniel J. Taylor
> Leonard A. Brooks
> Air & Sea
> Craig R. Lawler
> Jay Bosch
> John E. McCarthy
> Jim A. Sury
> George Skistmas
> William D. Rowe
> Duane Stockton
> Loyd J. Cox
> Michael J. Troy
> Brian J, Herreman
> John Haavisto
> Dennis Vetter
> Chester Davis
> William A. Lange Jr.
> Siegfried Werners
> John I. Warren
> Jerry L. Logan
> Theordore J Myers
> Harley A. Dahler
> Peter W. Schiffel
> David Karren
> Henry C. Hays
> Mike King
> Bill R. Preece
> Fred T Schmucker
> Martin A Vandenbrock
> Frank Dilman
> Jim Kinsella
> Dwayne D. Tulba
> Robert H. Greenwall
> David D. Petrocsko
> Joe Gibson
> Leon W. Slocum
> Jefferson H. Triplett
> Larry D. Harrison
> Bill Poiry
> Robert M. Hubbard
> Gail Acrft Engrg Co.
> Timothy W. Sefcik
> Harvey Planes LLC
> Lavaun M. Raaf
> Richard D. Tichy
> Lewis A Jennings
> Joseph Farkas
> William S. Knight
> Richard M. Carpenter
> John L. Overholser
> Joyce A. Hunt
> Harry K. Olsson
> Allan Mirkin
> Andrew C. Pietenpol
> James O Kearns
> Robin J. Passley
> Ryan G. Shepherd
> Don Schexnayder
> EAA Chapter 827
> Stephen Miller
> Thomas E. Bowdler
> Robert S. Nevin Jr.
> Thomas P. Paiement
> Richard Farwell
> Dream Aircraft Inc. (Clyde Buckley)
> Brad R. Schultz
> Craig R. Lawler
> Warren D. Bliss
> Deward D. Peterson
> David E. Jones
> Richard E. Wood
> Edward L. Sigman
> Maryann Dunn
> John M. Greenlee
> Joseph T. Kohler
> Ronald L. Jansen
> Melvin Green
> Theodore H. Bradley
> Tim Cunningham
> Thomas E. Fahy
> Dennis J. Heiny
> James E. Marshall
> Feffrey L. Austin
> Regis J. Fisher
> James L. Belknap
> Thomas A. Baker
> Robert H. Miller
> Lawrence C. Kropp
> Rodney L. Schrader
> Elmer C. Church
> Walter I. Groskurth
> Harold N. Downing
> Arch L. Howard
> Donald E. Meagher
> Thomas J. Young
> Ronald D. Bloomquist
> James R. Carr
> Virl B. Deal
> John E. Emmerson
> James E. Emmerson
> Freddie G. Emmerson
> Kevin Ross
> Daniel Patterson
> Quonset Air Museum
> Brian W. Swanson
> Charles E. Rubeck
> Cecil E. Boyd Jr.
> Ernest M. Bridgers
> Loyd R. Brents
> Malcom D. Muir
> Robert Bozeman
> Carroll G. Allen
> Joseph Leonard
> Donald Campbell
> Elaine C. Roehrig
> Joshua Harrel
> Floyd E. Shewmaker Jr.
> Richard L. Barfield
> Timothy TrueWalter Fuller
> Frederick F. Baker
> Jerome E. Hahn
> Virgil J. Phillips
> Science Museum of Virginia
> George A. Grant
> Robert E. Kamerman
> David L. Wheatley
> Larry & Julie Robbins
> Mark A. Anderson
> Mack A. Buswell
> Gary M. Goodman
> David A. Atnip
> David O. Thompson
> Edward M. Strackbein
> James T. Vandervort
> Charles B. Kile
>
>
Message 8
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | G-BUCO's email address |
I am looking for Alan James' (G-BUCO)email address. The one he used when he
once subscribed to this list does not appear to work. This is the same address
that shows on the UK Piet website. Does anybody have another email address
for him?
Chris
Message 9
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Tolerances and T-88 |
--> Pietenpol-List message posted by: john e fay <jefay@juno.com>
On Mon, 10 May 2004 21:55:29 -0400 "Jake Nichols"
<cowboyjake@insight.rr.com> writes:
> I now have cut the pieces for my test stabilizer and am going to be
> using the T-88 to put it together. My question is, how large a gap
> will T-88 safely fill? The largest is about 1/16th". Would T-88
> safely fill a gap that large? When I start building to fly I will
> be using better tools and able to keep the tolerances much tighter.
Sometimes when I had a gap to fill, I would cut a piece of 1/16" plywood
or 1/32" plywood to fit in the gap. Coat it with T-88 well on both sides
and slide it in to fill the gap. On most of these joints, the member is
being held in place by the gussets, so this will not effect the actual
strength of the joint.
John Fay
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|