----------------------------------------------------------
                           Pietenpol-List Digest Archive
                                      ---
                     Total Messages Posted Sun 05/16/04: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 02:33 AM - Re: Re: Costs of Fabric Covering  (Clif Dawson)
     2. 04:41 PM - Flop latches, intake system and more  (DJ Vegh)
     3. 08:46 PM - Aluminum Overcast Video from KCBS 2  (Christian Bobka)
 
 
 
________________________________  Message 1  _____________________________________


Time: 02:33:40 AM PST US
From: Clif Dawson <CDAWSON5854@shaw.ca>
Subject: Re: Pietenpol-List: RE: Costs of Fabric Covering

--> Pietenpol-List message posted by: Clif Dawson <CDAWSON5854@shaw.ca>

Read these sites ;

http://www.lightminiatureaircraft.com/generic34.htmlSubject:

http://www.modelairplanenews.com/how_to/latex1.asp

http://www.ultralightnews.com/features/paintinguls.htm

http://www.renderwurx.com/rc/SBD/html/paint/paint.htm

http://www.questiongravity.com/airbike/latex1.htm

And if all else fails, check the archives-lots more there.

Clif


> --> Pietenpol-List message posted by: Bill Church <eng@canadianrogers.com>
>
> This reply is coming from the voice of inexperience, as I have never
> attempted to spray latex. But I have read that in order to successfully
> spray latex, you must add FLOETROL, which I have seen on the shelves at
Home
> Depot. I have also read that an acceptable, and very readily available and
> inexpensive alternative to FLOETROL is ordinary automotive windshield
washer
> fluid. If anyone out there knows if this is true or, more importantly,
> false, please let everyone else know, as I would rather not be the
spreader
> of falsehoods. As I said before, I read it, I didn't make it up.
>
> Bill
>


________________________________  Message 2  _____________________________________


Time: 04:41:31 PM PST US
From: "DJ Vegh" <djv@imagedv.com>
Subject: Pietenpol-List: Flop latches, intake system and more

--> Pietenpol-List message posted by: "DJ Vegh" <djv@imagedv.com>

Several weeks ago some of you had requested some pics of my Flop latches....
well...I finally have taken the time to shoot some pics.

here's a couple

http://imagedv.com/aircamper/log/images/05-16-04/flop-latch-1.jpg
http://imagedv.com/aircamper/log/images/05-16-04/flop-latch-2.jpg
http://imagedv.com/aircamper/log/images/05-16-04/flop-latch-3.jpg

Also, I just finished installing my Corvair intake system, Stromberg carb,
carb heat box, John Deere generator, and spinner.  Pics and more here:

http://imagedv.com/aircamper/log/image-pages/05-02-04.htm
http://imagedv.com/aircamper/log/image-pages/05-14-04.htm
http://imagedv.com/aircamper/log/image-pages/04-26-04.htm

DJ Vegh
N74DV
Mesa, AZ
www.imagedv.com/aircamper


-


________________________________  Message 3  _____________________________________


Time: 08:46:48 PM PST US
From: "Christian Bobka" <sbobka@charter.net>
   "Craig Nelson" <c.s.nelson@prodigy.net>,
   "Dan Carroll" <ecarroll@cpinternet.com>, "David Kujawa" <dkujawa@cox.net>,
   "Ed Hansen" <DnEHansen@aol.com>, "Frankh" <frankhanish@cs.com>,
   "Greg" <gcardinal@mn.rr.com>, "Greg Cardinal" <gcardinal@startribune.com>,
   "Jeff Coffey" <coffey@crc-inc.com>, "Michael Dolan" <mdolan@tcq.net>,
   "Patrick Halligan" <pkhflying@aol.com>, "Pete Gavin" <petegavin@mn.rr.com>,
   "Peter Denny" <peter.denny@mpls.k12.mn.us>,
   "Peter Denny" <peterthepilot_99@yahoo.com>,
   "Rob Johnston" <rjohnst3@ford.com>, "Ron Hoyt" <rrhoyt@ieee.org>,
   "Ron Oehler" <r.oehler@comcast.net>, "Steve Adkins" <sadkins@isd.net>,
   "Flitzer" <Flitzer-Builders@yahoogroups.com>,
   "Pietenpol" <pietenpol-list@matronics.com>,
   "Corvair" <Corvaircraft@mylist.net>,
   "Chilton" <chilton_DW1@yahoogroups.com>
Subject: Pietenpol-List: Aluminum Overcast Video from KCBS 2

--> Pietenpol-List message posted by: "Christian Bobka" <sbobka@charter.net>

The following is a video of EAA's ALuminum OVercast B-17 on rollout with the
gear collapsing:

http://kcbs.dayport.com/launcher/2643/

I don't know how long it will be available fro viewing and I haven't figured
out a way to save the clip.  Any ideas?

Chris