----------------------------------------------------------
                           Pietenpol-List Digest Archive
                                      ---
                     Total Messages Posted Sat 06/19/04: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 08:54 PM - Re: Broadhead Roll Call  (Darrel E. Jones)
     2. 09:07 PM - Re: Pietenpol-List Digest: 15 Msgs - 06/18/04  (ADonJr@aol.com)
     3. 10:09 PM - Gussets and plywood question  ()
 
 
 
________________________________  Message 1  _____________________________________


Time: 08:54:19 PM PST US
From: "Darrel E. Jones" <wd6bor@vom.com>
Subject: Re: Pietenpol-List: Broadhead Roll Call

--> Pietenpol-List message posted by: "Darrel E. Jones" <wd6bor@vom.com>

Chris,

Frank said that it is the original Hisso radiator.

Darrel
----- Original Message ----- 
From: "Christian Bobka" <sbobka@charter.net>
Subject: Re: Pietenpol-List: Broadhead Roll Call


> --> Pietenpol-List message posted by: "Christian Bobka"
<sbobka@charter.net>
>
> A hisso Jenny would be good to see!
>
> Does it have the Hisso radiator that is round at the bottom?
>
> Chris
>


________________________________  Message 2  _____________________________________


Time: 09:07:38 PM PST US
From: ADonJr@aol.com
Subject: Pietenpol-List: Re: Pietenpol-List Digest: 15 Msgs - 06/18/04

Hey, Fellas!  (and gals, too, if any),
    I have read everything I have about wood, and except for one comment that 
hardwoods are mainly used in block form, I can find nothing about the 
selection and use of hardwood.  I am particularly wondering about the two pieces
of 
white ash in the fuselage, between the landing gear fittings.  The plans 
specify 3/4 X 2" cross members at the floor level.  
    How do you select the wood for these pieces...quarter sawn, vertical 
grain, yadda, yadda, yadda or what?  Could you substitute oak?  I'd eally 
appreciate the help of anyone who has dealt with this problem.  Thanks in advance.
                                                            Don Cooley
                                                            Fairfield, CA

P.S.  Wish I could join you at Brodhead, maybe next year!  DC 

________________________________  Message 3  _____________________________________


Time: 10:09:14 PM PST US
Subject: Pietenpol-List: Gussets and plywood question

Hello. As I previously said, Im from Argentina. Here is almost impossible to get
1/16 plywood, my choices are buy it from Aircraft Spruce,  Wicks, etc.(really
expensive), custom made plywood (we do have birch sheets, about 0,6mm or .0236
inches) or use 1/8 cedar marine plywood (very cheap, 17 dollars for a 7' x
5,25 sheet) for the ribs gussets. I know that 1/8 has been previously used but,
would this add to much weight? What do you think? Another question. Im able
to buy 1/4 cedar plywood for the fuselage floor, but this is just 3 ply. Could
that work anyway? Thanks.

Santiago Morete


---------------------------------
Internet gratis y que funciona!
Tres nuevas ciudades con nmeros locales:
Escobar, Zrate, Campana
Qu espers para navegar bien y rpido?