---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Wed 06/23/04: 8 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:23 AM - Re: Shirts for sale () 2. 08:34 AM - Broadhead 2004 (KTS5TA6@wmconnect.com) 3. 08:52 AM - Re: Brodhead (Hodgson, Mark O) 4. 09:13 AM - Re: Brodhead (Textor, Jack) 5. 12:22 PM - Re: Brodhead (KTS5TA6@wmconnect.com) 6. 02:08 PM - Re: One piece landing gear reinforcement straps and brackets (At7000ft@aol.com) 7. 04:47 PM - Re: Re: Shirts for sale () 8. 05:38 PM - Re: One piece landing gear reinforcement straps and brackets (Laurits Larsen) ________________________________ Message 1 _____________________________________ Time: 04:23:39 AM PST US From: Subject: Re: Pietenpol-List: Shirts for sale Chris, Do you have contact info for Bill Weeden? Greg ----- Original Message ----- From: Christian Bobka To: Pietenpol Sent: Tuesday, June 22, 2004 9:10 PM Subject: Pietenpol-List: Shirts for sale Guys, Bill Weeden still has some nice shirts for sale. A sample picture of the back of one of the shirt types is below. 15 bucks each and he has already "lost his shirt" on these. I just got five. Chris Chris, OK, here's what I have left. There will probably never be any more after these are gone. All are adult sizes. SMALL - 1 MEDIUM - 10 LARGE - 13 X-LARGE - 16 I'll send you as many as you want. $15 each. I can ship one shirt Priority Mail for $3.85. Two shirts comes to just under $5 to ship. I don't think I've shipped more than two at a time. However many you want, I will box them up and have it weighed. Just let me know. Thanks, Bill p.s. I also have four of the SCOUT shirts left, all are size LARGE. Printed in three colors on the front only. They are $12 each. billrobin@wekz.net ________________________________ Message 2 _____________________________________ Time: 08:34:54 AM PST US From: KTS5TA6@wmconnect.com Subject: Pietenpol-List: Broadhead 2004 pts rule name description ---- ---------------------- ------------------------------------------- 0.3 FROM_HAS_MIXED_NUMS From: contains numbers mixed in with letters I'm about 75% certain that I'll be making the trip to Broadhead. Name: Sterling Brooks Mode of travel: Car (yuk) but someday in an aircamper Traveling from: Central Texas (Knot2Shabby Airport, 5TA6 San Antonio Sectional) I have a Pietenpol rebuild project... A GN-1 Project A Continental A-80 engine overhaul project ________________________________ Message 3 _____________________________________ Time: 08:52:31 AM PST US Subject: Re: Pietenpol-List: Brodhead From: "Hodgson, Mark O" --> Pietenpol-List message posted by: "Hodgson, Mark O" Any chance a set of plans will be available at Brodhead for reference, for those coming through the TSA airport swamp with little more than a camera, tape measure, notepad, and toothbrush? Mark Hodgson ________________________________ Message 4 _____________________________________ Time: 09:13:57 AM PST US Subject: RE: Pietenpol-List: Brodhead From: "Textor, Jack" --> Pietenpol-List message posted by: "Textor, Jack" Mark, I can bring a set of "original" and GN1 Jack Textor Des Moines Any chance a set of plans will be available at Brodhead for reference, for those coming through the TSA airport swamp with little more than a camera, tape measure, notepad, and toothbrush? Mark Hodgson == == == == ________________________________ Message 5 _____________________________________ Time: 12:22:26 PM PST US From: KTS5TA6@wmconnect.com Subject: Re: Pietenpol-List: Brodhead I can bring both of my sets of plans for the Pietenpol and GN-1 if needed. Please contact me directly at: kts5ta6@wmconnect.com Sterlling Brooks Knot 2 Shabby Airport 5TA6 San Antonio Sectional ________________________________ Message 6 _____________________________________ Time: 02:08:14 PM PST US From: At7000ft@aol.com Subject: Re: Pietenpol-List: One piece landing gear reinforcement straps and brackets --> Pietenpol-List message posted by: At7000ft@aol.com Thats interesting, you attached your reinforcement strap between the ash and the plywood floor? Rather than to the bottom of the ply floor? >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Yes, it has been done before. Thats what I did; routed out a groove in the bottom of the ash cross pieces and installed the assemblies before I put the luan plywood floor piece in place. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ________________________________ Message 7 _____________________________________ Time: 04:47:10 PM PST US From: Subject: Re: Re: Pietenpol-List: Shirts for sale --> Pietenpol-List message posted by: see the bottom line of what is below Chris do not archive > > From: > Date: 2004/06/23 Wed AM 11:23:36 GMT > To: > Subject: Re: Pietenpol-List: Shirts for sale > > Chris, > Do you have contact info for Bill Weeden? > > Greg > ----- Original Message ----- > From: Christian Bobka > To: Pietenpol > Sent: Tuesday, June 22, 2004 9:10 PM > Subject: Pietenpol-List: Shirts for sale > > > Guys, > > Bill Weeden still has some nice shirts for sale. A sample picture of the back of one of the shirt types is below. 15 bucks each and he has already "lost his shirt" on these. I just got five. > > Chris > > > > Chris, > > OK, here's what I have left. There will probably never be any more > after these are gone. > All are adult sizes. > > SMALL - 1 > MEDIUM - 10 > LARGE - 13 > X-LARGE - 16 > > I'll send you as many as you want. $15 each. I can ship one shirt > Priority Mail for $3.85. Two shirts comes to just under $5 to ship. > I don't think I've shipped more than two at a time. However many you > want, I will box them up and have it weighed. Just let me know. > > Thanks, > Bill > > p.s. I also have four of the SCOUT shirts left, all are size LARGE. > Printed in three colors on the front only. They are $12 each. > > billrobin@wekz.net > > ________________________________ Message 8 _____________________________________ Time: 05:38:50 PM PST US From: "Laurits Larsen" Subject: Re: Pietenpol-List: One piece landing gear reinforcement straps and brackets --> Pietenpol-List message posted by: "Laurits Larsen" Hi, Yes, by routing the groove, the ply was flush on the fuse structure. Lou larsen ----- Original Message ----- From: Subject: Re: Pietenpol-List: One piece landing gear reinforcement straps and brackets > --> Pietenpol-List message posted by: At7000ft@aol.com > > Thats interesting, you attached your reinforcement strap between the ash and the plywood floor? Rather than to the bottom of the ply floor? > > > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > Yes, it has been done before. > > Thats what I did; routed out a groove in the bottom of the ash cross pieces > and installed the assemblies before I put the luan plywood floor piece in > place. > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > >