Pietenpol-List Digest Archive

Sun 07/04/04


Total Messages Posted: 2



Today's Message Index:
----------------------
 
     1. 04:17 PM - Piet on floats (Shawn Wolk)
     2. 05:15 PM - Re: Piet on floats (John Carmen)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:17:30 PM PST US
    From: "Shawn Wolk" <shawnwolk@sprint.ca>
    Subject: Piet on floats
    Well fellow Piet enthusiasts. I've decided to try it. I am installing a set of full lotus 1260 on my A65 powered Piet. The first flight test should be within 2 weeks. Pictures and rigging data will be forwarded. I was going to start at placing the float step 6" behind the CG location of 19" from the wing leading edge. (or float Cg at 13"" from leading edge) This location should give me the 19" CG location at the way the aircraft will fly most of the time. And I will initially experiment with -3deg of float down incidence. I hope it gets off and actually climbs! I'll be using a very large lake for the tests so plenty of room to experiment. Any further tips or ideas are welcome. Shawn Wolk Winnipeg, MB C-FRAZ Pietenpol Aircamper (wheels,ski's, and shortly floats) C-GZOT Skyhopper 2


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:15:53 PM PST US
    From: "John Carmen" <jcar@nefcom.net>
    Subject: Piet on floats
    JATO assit -----Original Message----- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Shawn Wolk Subject: Pietenpol-List: Piet on floats Well fellow Piet enthusiasts. I've decided to try it. I am installing a set of full lotus 1260 on my A65 powered Piet. The first flight test should be within 2 weeks. Pictures and rigging data will be forwarded. I was going to start at placing the float step 6" behind the CG location of 19" from the wing leading edge. (or float Cg at 13"" from leading edge) This location should give me the 19" CG location at the way the aircraft will fly most of the time. And I will initially experiment with -3deg of float down incidence. I hope it gets off and actually climbs! I'll be using a very large lake for the tests so plenty of room to experiment. Any further tips or ideas are welcome. Shawn Wolk Winnipeg, MB C-FRAZ Pietenpol Aircamper (wheels,ski's, and shortly floats) C-GZOT Skyhopper 2




    Other Matronics Email List Services

  • Post A New Message
  •   pietenpol-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Pietenpol-List.htm
  • Full Archive Search Engine
  •   http://www.matronics.com/search
  • 7-Day List Browse
  •   http://www.matronics.com/browse/pietenpol-list
  • Browse Pietenpol-List Digests
  •   http://www.matronics.com/digest/pietenpol-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contributions

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --