Today's Message Index:
----------------------
1. 11:05 AM - lining up tail section hinges (Gary W Meadows)
2. 12:17 PM - Re: lining up tail section hinges (Christian Bobka)
3. 06:35 PM - Chuck Gantzer' Tour America (Isablcorky@aol.com)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | lining up tail section hinges |
Tim,
What I did for lining up the hinges is to go to Home Depot of Lowe's and buy a
piece of 3/32" diameter (as I remember) steel rod, to thread through all three
hinges and then use that to line them all up to get the axis of all three hinges
perfectly inline. Worked pretty good!
Good Luck!
Gary Meadows
Spring, TX
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
d="scan'217,208"; a="159484235:sNHT19002268"
Subject: | Re: lining up tail section hinges |
Gary,
Don't forget to call me one of these days.
612 207 3762
Chris
----- Original Message -----
From: Gary W Meadows
To: pietenpol-list@matronics.com
Sent: Wednesday, August 11, 2004 1:05 PM
Subject: Pietenpol-List: lining up tail section hinges
Tim,
What I did for lining up the hinges is to go to Home Depot of Lowe's and buy
a piece of 3/32" diameter (as I remember) steel rod, to thread through all three
hinges and then use that to line them all up to get the axis of all three
hinges perfectly inline. Worked pretty good!
Good Luck!
Gary Meadows
Spring, TX
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Chuck Gantzer' Tour America |
Pieters and interested,
Chuck called at 1126 this morning while we were out at the grocery store. We
didn't discover the call until after 8 tonight. I couldn't get all the
locations but whereever he was he was before departing for Lake of the Ozarks In
Missouri. Said he wanted to see some sites at low altitude. Had checked out all
the towers and high trees and planned to fly low and slow. Would go next to
Eureka Springs. That's back in Arkansas but I guess he knows where he's going.
That's as specific as I can be. He still doesn't seem to be in any hurry. Why
should he be, he's having fun.
Chuck's Operations shack
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|