---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Wed 08/11/04: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 11:05 AM - lining up tail section hinges (Gary W Meadows) 2. 12:17 PM - Re: lining up tail section hinges (Christian Bobka) 3. 06:35 PM - Chuck Gantzer' Tour America (Isablcorky@aol.com) ________________________________ Message 1 _____________________________________ Time: 11:05:45 AM PST US From: Gary W Meadows Subject: Pietenpol-List: lining up tail section hinges Tim, What I did for lining up the hinges is to go to Home Depot of Lowe's and buy a piece of 3/32" diameter (as I remember) steel rod, to thread through all three hinges and then use that to line them all up to get the axis of all three hinges perfectly inline. Worked pretty good! Good Luck! Gary Meadows Spring, TX ________________________________ Message 2 _____________________________________ Time: 12:17:58 PM PST US d="scan'217,208"; a="159484235:sNHT19002268" From: "Christian Bobka" Subject: Re: Pietenpol-List: lining up tail section hinges Gary, Don't forget to call me one of these days. 612 207 3762 Chris ----- Original Message ----- From: Gary W Meadows To: pietenpol-list@matronics.com Sent: Wednesday, August 11, 2004 1:05 PM Subject: Pietenpol-List: lining up tail section hinges Tim, What I did for lining up the hinges is to go to Home Depot of Lowe's and buy a piece of 3/32" diameter (as I remember) steel rod, to thread through all three hinges and then use that to line them all up to get the axis of all three hinges perfectly inline. Worked pretty good! Good Luck! Gary Meadows Spring, TX ________________________________ Message 3 _____________________________________ Time: 06:35:18 PM PST US From: Isablcorky@aol.com Subject: Pietenpol-List: Chuck Gantzer' Tour America Pieters and interested, Chuck called at 1126 this morning while we were out at the grocery store. We didn't discover the call until after 8 tonight. I couldn't get all the locations but whereever he was he was before departing for Lake of the Ozarks In Missouri. Said he wanted to see some sites at low altitude. Had checked out all the towers and high trees and planned to fly low and slow. Would go next to Eureka Springs. That's back in Arkansas but I guess he knows where he's going. That's as specific as I can be. He still doesn't seem to be in any hurry. Why should he be, he's having fun. Chuck's Operations shack