----------------------------------------------------------
                           Pietenpol-List Digest Archive
                                      ---
                     Total Messages Posted Sun 12/19/04: 4
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 08:54 AM - Cutting elevator and rudder control horns  (Rick Holland)
     2. 10:54 AM - Re: Cutting elevator and rudder control horns  ()
     3.  PM -   ()
     4. 01:02 PM - Re: Cutting elevator and rudder control horns  (Rick Holland)
 
 
 
________________________________  Message 1  _____________________________________


Time: 08:54:49 AM PST US
DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws;
        s=beta; d=gmail.com;
        b=l1GYGWVbGbdhZprglaXf9LD0dtucdK5ctKunNhIbFntIfrE7C7TjRFeiJeLa02WD4dh1alnuUs9EzsG3pKlqRtmJlch3i5QUPmr2IXw9yx/iWSHEIFZe1li9pu2L8BT9p61pMKbSfMzVU81CamHDsWCpeaPaZuSQ6yyVvCop75sMessage-ID:
<ab80748b04121908547125d6c7@mail.gmail.com>
From: Rick Holland <at7000ft@gmail.com>
Subject: Pietenpol-List: Cutting elevator and rudder control horns

--> Pietenpol-List message posted by: Rick Holland <at7000ft@gmail.com>

What did you guys use to cutout the inner tabs (which are bent out and
drilled) on the tail control horns? Looks like I will need a 1/16" or
narrower hacksaw blade or a metal cutting scrollsaw.


Thanks
-- 
Rick Holland


________________________________  Message 2  _____________________________________


Time: 10:54:37 AM PST US
From: <gcardinal@mn.rr.com>
Subject: Re: Pietenpol-List: Cutting elevator and rudder control horns

--> Pietenpol-List message posted by: <gcardinal@mn.rr.com>

A Dremel tool with a cutoff wheel worked well
for me.

Greg Cardinal

----- Original Message ----- 
From: "Rick Holland" <at7000ft@gmail.com>
Subject: Pietenpol-List: Cutting elevator and 
rudder control horns


> --> Pietenpol-List message posted by: Rick 
> Holland <at7000ft@gmail.com>
>
> What did you guys use to cutout the inner 
> tabs (which are bent out and
> drilled) on the tail control horns? Looks 
> like I will need a 1/16" or
> narrower hacksaw blade or a metal cutting 
> scrollsaw.
>
>
> Thanks
> -- 
> Rick Holland
>
>
> Forum -
> through the Contributions
> banner ads or any other
> Matronics Forums.
> pietenpol-list@matronics.com
> http://www.matronics.com/subscription
> http://www.matronics.com/FAQ/Pietenpol-List.htm
> http://www.matronics.com/search
> http://www.matronics.com/archives
> http://www.matronics.com/photoshare
> http://www.matronics.com/emaillists
>
>
> 


________________________________  Message 3  _____________________________________
________________________________  Message 4  _____________________________________


Time: 01:02:38 PM PST US
From: Rick Holland <at7000ft@gmail.com>
Subject: Re: Pietenpol-List: Cutting elevator and rudder control horns

--> Pietenpol-List message posted by: Rick Holland <at7000ft@gmail.com>

Thanks guys, the Dremel worked great.

RH


On Sun, 19 Dec 2004 12:54:39 -0600, gcardinal@mn.rr.com
<gcardinal@mn.rr.com> wrote:
> --> Pietenpol-List message posted by: <gcardinal@mn.rr.com>
> 
> A Dremel tool with a cutoff wheel worked well
> for me.
> 
> Greg Cardinal
> 
> ----- Original Message -----
> From: "Rick Holland" <at7000ft@gmail.com>
> To: <pietenpol-list@matronics.com>
> Sent: Sunday, December 19, 2004 10:54 AM
> Subject: Pietenpol-List: Cutting elevator and
> rudder control horns
> 
> > --> Pietenpol-List message posted by: Rick
> > Holland <at7000ft@gmail.com>
> >
> > What did you guys use to cutout the inner
> > tabs (which are bent out and
> > drilled) on the tail control horns? Looks
> > like I will need a 1/16" or
> > narrower hacksaw blade or a metal cutting
> > scrollsaw.
> >
> >
> > Thanks
> > --
> > Rick Holland
> >
> >
> >
> >
> > Forum -
> > through the Contributions
> > banner ads or any other
> > Matronics Forums.
> > pietenpol-list@matronics.com
> > http://www.matronics.com/subscription
> > http://www.matronics.com/FAQ/Pietenpol-List.htm
> > http://www.matronics.com/search
> > http://www.matronics.com/archives
> > http://www.matronics.com/photoshare
> > http://www.matronics.com/emaillists
> >
> >
> >
> >
> >
> 
> 
> 


-- 
Rick Holland