----------------------------------------------------------
                           Pietenpol-List Digest Archive
                                      ---
                     Total Messages Posted Thu 03/24/05: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 08:05 PM - Re: "convert" program  (Barry Davis)
     2. 08:34 PM - Re: "convert" program  (Galen Hutcheson)
 
 
 
________________________________  Message 1  _____________________________________


Time: 08:05:16 PM PST US
   d="scan'217,208"; a="705972283:sNHT33119768"
From: "Barry Davis" <bed@mindspring.com>
Subject: Re: Pietenpol-List: "convert" program

Hey Walt
I'de like to have it
Barry
bed@mindspring.com
  ----- Original Message -----
  From: walt evans
  To: pietenpol-list@matronics.com
  Sent: Sunday, March 20, 2005 5:41 PM
  Subject: Pietenpol-List: "convert" program


  A year or so ago I offered a program to any one who wanted it.  It's called "convert"
and it converts anything to anything.  Any volume amounts, any weight
amounts, angles,speed, temp, torque, force, blah, blah, blah.  Simple to use,
even the engineers got a kick out of it. 
  Any body that doesn't have it wants it, just post to the group, and I'll send
it to you directly. 
  It's about 1/2 meg, and don't want to clog up the group.
  walt evans
  NX140DL
________________________________  Message 2  _____________________________________


Time: 08:34:43 PM PST US
  s=s1024; d=yahoo.com;
  b=RTUKYpNU3DWuB1BUb3zQXvqVoOIkTdnjTUirt2trifYpYH221pXtR7WLNy3+W03tEgaDHywydiFFNjyoh1SMczHtbVLciYat34LDumB1+3bo2s3DhImhrua1XER/+8GfhAUcLGi9ELLnKL33emojOf2IbwCwb00YYSn/stZ6AAI=
;
From: Galen Hutcheson <wacopitts@yahoo.com>
Subject: Re: Pietenpol-List: "convert" program

--> Pietenpol-List message posted by: Galen Hutcheson <wacopitts@yahoo.com>

Hi Walt, I would like a copy if it's not too much
trouble.  Thanks.

Doc
--- Barry Davis <bed@mindspring.com> wrote:

> Hey Walt
> I'de like to have it
> Barry
> bed@mindspring.com
>   ----- Original Message ----- 
>   From: walt evans 
>   To: pietenpol-list@matronics.com 
>   Sent: Sunday, March 20, 2005 5:41 PM
>   Subject: Pietenpol-List: "convert" program
> 
> 
>   A year or so ago I offered a program to any one
> who wanted it.  It's called "convert" and it
> converts anything to anything.  Any volume amounts,
> any weight amounts, angles,speed, temp, torque,
> force, blah, blah, blah.  Simple to use, even the
> engineers got a kick out of it.  
>   Any body that doesn't have it wants it, just post
> to the group, and I'll send it to you directly.  
>   It's about 1/2 meg, and don't want to clog up the
> group.
>   walt evans
>   NX140DL