Today's Message Index:
----------------------
1. 04:37 AM - Jenny rigging (BernadetteTS)
2. 05:37 AM - Southwest Regional Fly In (Texas) (N321TX@wmconnect.com)
3. 05:39 AM - Re: Southwest Regional Fly In (Texas) (Phillips, Jack)
4. 06:41 AM - wing incidence (Oscar Zuniga)
5. 07:12 AM - Re: Southwest Regional Fly In (Texas) (Steve Ruse)
6. 08:01 AM - Re: Southwest Regional Fly In (Texas) (TRichmo9@aol.com)
7. 08:14 AM - Re: Southwest Regional Fly In (Texas) (Super Secret)
8. 08:22 AM - Re: Southwest Regional Fly In (Texas) (TRichmo9@aol.com)
9. 08:32 AM - Re: Southwest Regional Fly In (Texas) (Phillips, Jack)
10. 09:07 AM - Re: Southwest Regional Fly In (Texas) (Super Secret)
11. 12:21 PM - Re: Southwest Regional Fly In (Texas) (Carl Vought)
12. 07:07 PM - basswood (TRichmo9@aol.com)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Pietenpol-List message posted by: BernadetteTS <docfont@voyager.net>
A month or two ago someone mentioned building a Jenny replica based
on the Pietenpol airframe. I offered to make copies of some 1918
factory drawings and rigging manuals I have. Would the person who
wanted these send me an email?
There are 34 pages and the local blueprint shop charged me 30 cents a
page to make copies. Figure $3 for shipping if I can sneak it through
as media mail.
DocFont
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Southwest Regional Fly In (Texas) |
Any Piet/GN-1 builders/flyers plan on making this event in Hondo? May 13,
14, 15
http://www.swrfi.org
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Southwest Regional Fly In (Texas) |
Wish I could, but that is even further than Brodhead from Raleigh.
Besides, the plane is still in my basement. I'll see you at Brodhead,
though.
Jack Phillips, PE
Sr. Manager, Disposables Product Development
Clinical Technologies and Services
Cardinal Health
Creedmoor, NC
(919) 528-5212
-----Original Message-----
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of
N321TX@wmconnect.com
Subject: Pietenpol-List: Southwest Regional Fly In (Texas)
Any Piet/GN-1 builders/flyers plan on making this event in Hondo? May
13, 14, 15
http://www.swrfi.org
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Pietenpol-List message posted by: "Oscar Zuniga" <taildrags@hotmail.com>
Mr. Smart-Alec (aka, "Jim Markle") wrote-
>the airfoil's chord line is tilted up from a line that would be
>drawn between these two holes.....so I believe you would add
>that 1.99 to the airfoil's actual (and tilted up) angle of incidence...
Well of course you would. I knew that, but didn't want to go over
everybody's head with a bunch of engineer talk and trigonometry ;o) I
should have used the proper terminology and all that. But both you and DJ
confirmed what I was finding... that the difference in cabane length leads
to about a 2 degree incidence change to a line drawn across the bottom (or
top) of the two wing spars. What I was trying to get out of my head was the
3 degrees that I'd read somewhere, because that isn't what you get with a 1"
cabane strut length difference.
Thanks, gents.
Oscar Zuniga
San Antonio, TX
mailto: taildrags@hotmail.com
website at http://www.flysquirrel.net
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Southwest Regional Fly In (Texas) |
--> Pietenpol-List message posted by: Steve Ruse <steve@wotelectronics.com>
I would love to, but my brother is getting married on the 15th and I better be
there or I'll be in trouble.
Another great TX fly-in is the Reklaw fly-in in Ocotober. I've seen a
Sky-Scout
there, but would love to see some more Pietenpols or GN-1s. It is a fun ~2-day
camping fly-in, usually around 200 planes on a BIG grass strip in the
middle of
the piney woods in East Texas (Reklaw, TX). You can camp on site, or
there is a
shuttle that will take you to a nearby hotel. E-mail me if anyone needs more
information.
http://www.globalair.com/discussions/georges_hangar/article.asp?msgID=363
For anyone that is curious, I got my GN-1 home this weekend, a three-day, 820
mile trip! It was a great trip, I had a lot of fun, and met some of
the nicest
people around. I'll post some pictures and details when I have time. For now
though, there is a GN-1 at KGYI in Sherman, TX.
Steve Ruse
N6383J - Coppell, TX
Quoting N321TX@wmconnect.com:
> Any Piet/GN-1 builders/flyers plan on making this event in Hondo? May 13,
> 14, 15
>
> http://www.swrfi.org
>
>
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Southwest Regional Fly In (Texas) |
In a message dated 4/19/05 9:13:33 A.M. Central Daylight Time,
steve@wotelectronics.com writes:
--> Pietenpol-List message posted by: Steve Ruse <steve@wotelectronics.com>
I would love to, but my brother is getting married on the 15th and I better
be
there or I'll be in trouble.
Another great TX fly-in is the Reklaw fly-in in Ocotober. I've seen a
Sky-Scout
there, but would love to see some more Pietenpols or GN-1s. It is a fun
~2-day
camping fly-in, usually around 200 planes on a BIG grass strip in the
middle of
the piney woods in East Texas (Reklaw, TX). You can camp on site, or
there is a
shuttle that will take you to a nearby hotel. E-mail me if anyone needs
more
information.
http://www.globalair.com/discussions/georges_hangar/article.asp?msgID=363
For anyone that is curious, I got my GN-1 home this weekend, a three-day,
820
mile trip! It was a great trip, I had a lot of fun, and met some of
the nicest
people around. I'll post some pictures and details when I have time. For
now
though, there is a GN-1 at KGYI in Sherman, TX.
Steve Ruse
N6383J - Coppell, TX
Quoting N321TX@wmconnect.com:
> Any Piet/GN-1 builders/flyers plan on making this event in Hondo? May 13,
> 14, 15
>
> http://www.swrfi.org
>
>
tom
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Southwest Regional Fly In (Texas) |
How many Pietenpols usually show up at Brodhead? I've just ordered plans to
build one and might be a good idea to see a few in person. I'm in middle TN
and that might make a nice road trip.
On 4/19/05, Steve Ruse <steve@wotelectronics.com> wrote:
>
> --> Pietenpol-List message posted by: Steve Ruse <steve@wotelectronics.com
> >
>
> I would love to, but my brother is getting married on the 15th and I
> better be
> there or I'll be in trouble.
>
> Another great TX fly-in is the Reklaw fly-in in Ocotober. I've seen a
> Sky-Scout
> there, but would love to see some more Pietenpols or GN-1s. It is a fun
> ~2-day
> camping fly-in, usually around 200 planes on a BIG grass strip in the
> middle of
> the piney woods in East Texas (Reklaw, TX). You can camp on site, or
> there is a
> shuttle that will take you to a nearby hotel. E-mail me if anyone needs
> more
> information.
>
> http://www.globalair.com/discussions/georges_hangar/article.asp?msgID363
>
> For anyone that is curious, I got my GN-1 home this weekend, a three-day,
> 820
> mile trip! It was a great trip, I had a lot of fun, and met some of
> the nicest
> people around. I'll post some pictures and details when I have time. For
> now
> though, there is a GN-1 at KGYI in Sherman, TX.
>
> Steve Ruse
> N6383J - Coppell, TX
>
> Quoting N321TX@wmconnect.com:
>
> > Any Piet/GN-1 builders/flyers plan on making this event in Hondo? May
> 13,
> > 14, 15
> >
> > http://www.swrfi.org
> >
> >
>
>
>
Message 8
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Southwest Regional Fly In (Texas) |
In a message dated 4/19/05 10:16:08 A.M. Central Daylight Time,
covertspecialops@gmail.com writes:
How many Pietenpols usually show up at Brodhead? I've just ordered plans to
build one and might be a good idea to see a few in person. I'm in middle TN
and that might make a nice road trip.
On 4/19/05, Steve Ruse <_steve@wotelectronics.com_
(mailto:steve@wotelectronics.com) > wrote:
--> Pietenpol-List message posted by: Steve Ruse <_steve@wotelectronics.com
_ (mailto:steve@wotelectronics.com) >
I would love to, but my brother is getting married on the 15th and I better
be
there or I'll be in trouble.
Another great TX fly-in is the Reklaw fly-in in Ocotober. I've seen a
Sky-Scout
there, but would love to see some more Pietenpols or GN-1s. It is a fun
~2-day
camping fly-in, usually around 200 planes on a BIG grass strip in the
middle of
the piney woods in East Texas (Reklaw, TX). You can camp on site, or
there is a
shuttle that will take you to a nearby hotel. E-mail me if anyone needs
more
information.
_http://www.globalair.com/discussions/georges_hangar/article.asp?msgID=363 _
(http://www.globalair.com/discussions/georges_hangar/article.asp?msgID=363)
For anyone that is curious, I got my GN-1 home this weekend, a three-day, 820
mile trip! It was a great trip, I had a lot of fun, and met some of
the nicest
people around. I'll post some pictures and details when I have time. For
now
though, there is a GN-1 at KGYI in Sherman, TX.
Steve Ruse
N6383J - Coppell, TX
Quoting _N321TX@wmconnect.com_ (mailto:N321TX@wmconnect.com) :
> Any Piet/GN-1 builders/flyers plan on making this event in Hondo? May
13,
> 14, 15
>
> _http://www=================================================
_ (http://www.swrfi.org/)
steve where is hondo located
Message 9
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Southwest Regional Fly In (Texas) |
Numbers of Piets at Brodhead varies from a handful to a bunch. How's
that for precision? Seriously, you can count on at least 6 or 7
Pietenpols, and maybe as many as 20. Check out:
http://www.avweb.com/news/homeblts/182613-1.html for a good description
of the fly-in.
Jack Phillips
NX899JP
Raleigh, NC - "18 hours away from Brodhead by Pietenpol"
-----Original Message-----
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Super
Secret
Subject: Re: Pietenpol-List: Southwest Regional Fly In (Texas)
How many Pietenpols usually show up at Brodhead? I've just ordered plans
to build one and might be a good idea to see a few in person. I'm in
middle TN and that might make a nice road trip.
On 4/19/05, Steve Ruse <steve@wotelectronics.com> wrote:
--> Pietenpol-List message posted by: Steve Ruse
<steve@wotelectronics.com >
I would love to, but my brother is getting married on the 15th and I
better be
there or I'll be in trouble.
Another great TX fly-in is the Reklaw fly-in in Ocotober. I've seen a
Sky-Scout
there, but would love to see some more Pietenpols or GN-1s. It is a fun
~2-day
camping fly-in, usually around 200 planes on a BIG grass strip in the
middle of
the piney woods in East Texas (Reklaw, TX). You can camp on site, or
there is a
shuttle that will take you to a nearby hotel. E-mail me if anyone needs
more
information.
http://www.globalair.com/discussions/georges_hangar/article.asp?msgID36
3
<http://www..globalair.com/discussions/georges_hangar/article.asp?msgID
363>
For anyone that is curious, I got my GN-1 home this weekend, a
three-day, 820
mile trip! It was a great trip, I had a lot of fun, and met some of
the nicest
people around. I'll post some pictures and details when I have time.
For now
though, there is a GN-1 at KGYI in Sherman, TX.
Steve Ruse
N6383J - Coppell, TX
Quoting N321TX@wmconnect.com:
> Any Piet/GN-1 builders/flyers plan on making this event in Hondo? May
13,
> 14, 15
>
> http://www
<http://www.swrfi.org>
<http://www.swrfi.org>
Message 10
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Southwest Regional Fly In (Texas) |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Message 11
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Southwest Regional Fly In (Texas) |
Dear SS:...I know of three in progress near Huntsville, AL..Carl Vought
----- Original Message -----
From: Super Secret
To: pietenpol-list@matronics.com
Sent: Tuesday, April 19, 2005 11:14 AM
Subject: Re: Pietenpol-List: Southwest Regional Fly In (Texas)
How many Pietenpols usually show up at Brodhead? I've just ordered plans to build
one and might be a good idea to see a few in person. I'm in middle TN and
that might make a nice road trip.
On 4/19/05, Steve Ruse <steve@wotelectronics.com> wrote:
--> Pietenpol-List message posted by: Steve Ruse <steve@wotelectronics.com
>
I would love to, but my brother is getting married on the 15th and I better
be
there or I'll be in trouble.
Another great TX fly-in is the Reklaw fly-in in Ocotober. I've seen a
Sky-Scout
there, but would love to see some more Pietenpols or GN-1s. It is a fun ~2-day
camping fly-in, usually around 200 planes on a BIG grass strip in the
middle of
the piney woods in East Texas (Reklaw, TX). You can camp on site, or
there is a
shuttle that will take you to a nearby hotel. E-mail me if anyone needs more
information.
http://www.globalair.com/discussions/georges_hangar/article.asp?msgID363
For anyone that is curious, I got my GN-1 home this weekend, a three-day, 820
mile trip! It was a great trip, I had a lot of fun, and met some of
the nicest
people around. I'll post some pictures and details when I have time. For
now
though, there is a GN-1 at KGYI in Sherman, TX.
Steve Ruse
N6383J - Coppell, TX
Quoting N321TX@wmconnect.com:
> Any Piet/GN-1 builders/flyers plan on making this event in Hondo? May 13,
> 14, 15
>
> http://www
Message 12
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
has anyone used basswood for the longerons or spars on a piet
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|