---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Sat 06/11/05: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:47 AM - Re: long overwater flight to Belize ? (Clif Dawson) 2. 02:44 PM - Bellcrank neutral postion question (Rick Holland) 3. 07:21 PM - Re: Bellcrank neutral postion question () 4. 08:16 PM - Re: Bellcrank neutral postion question (Dick Navratil) ________________________________ Message 1 _____________________________________ Time: 12:47:05 AM PST US From: Clif Dawson Subject: Re: Pietenpol-List: long overwater flight to Belize ? <007101c56d7d$0f44e4c0$7b0d5018@dawsonaviation> <004101c56db3$9a8295b0$6401a8c0@FAMILY> I'm just trying to keep you out of trouble ol' buddy. I guess I'll have to send coachwhipping next. Guaranteed to keep at least one of you out of trouble. You'll be the consumate sky sailor soon. :-) Grass Router in Vancouver. Def: grass router- woodworkers lawnmower. ----- Original Message ----- From: Jim Markle Sloshing sealer, knot tying, spar reinforcing pieces, wooden hand made clamps (which I saw a luthier use on TV recently), etc, etc, etc.....seems like everytime I see your name on an email I end up with a NEW HOMEWORK ASSIGNMENT!!!! ________________________________ Message 2 _____________________________________ Time: 02:44:58 PM PST US From: Rick Holland Subject: Pietenpol-List: Bellcrank neutral postion question What angle should the bellcrank be at with neutral elevators? I found one archive message mentioning that his was 25 degrees from vertical with the top towards the front. -- Rick Holland ________________________________ Message 3 _____________________________________ Time: 07:21:13 PM PST US From: Subject: Re: Pietenpol-List: Bellcrank neutral postion question The bellcrank, or walking beam, on NX18235 is vertical when the elevators are aligned with the stabilizer. Greg Cardinal ----- Original Message ----- From: Rick Holland To: pietenpol-list@matronics.com Sent: Saturday, June 11, 2005 4:44 PM Subject: Pietenpol-List: Bellcrank neutral postion question What angle should the bellcrank be at with neutral elevators? I found one archive message mentioning that his was 25 degrees from vertical with the top towards the front. -- Rick Holland ________________________________ Message 4 _____________________________________ Time: 08:16:25 PM PST US From: "Dick Navratil" Subject: Re: Pietenpol-List: Bellcrank neutral postion question Mine also. Dick N. ----- Original Message ----- From: gcardinal@mn.rr.com To: pietenpol-list@matronics.com Sent: Saturday, June 11, 2005 9:24 PM Subject: Re: Pietenpol-List: Bellcrank neutral postion question The bellcrank, or walking beam, on NX18235 is vertical when the elevators are aligned with the stabilizer. Greg Cardinal ----- Original Message ----- From: Rick Holland To: pietenpol-list@matronics.com Sent: Saturday, June 11, 2005 4:44 PM Subject: Pietenpol-List: Bellcrank neutral postion question What angle should the bellcrank be at with neutral elevators? I found one archive message mentioning that his was 25 degrees from vertical with the top towards the front. -- Rick Holland