----------------------------------------------------------
                           Pietenpol-List Digest Archive
                                      ---
                     Total Messages Posted Thu 10/20/05: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 03:28 AM - Re: Vi Kapler's Phone #  (M&M Stanley)
     2. 05:15 AM - Re: alternative glues  ()
     3. 05:25 AM - FlyCorvair update  (Oscar Zuniga)
 
 
 
________________________________  Message 1  _____________________________________


Time: 03:28:40 AM PST US
From: "M&M Stanley" <tomiya@di.mbn.or.jp>
Subject: Pietenpol-List: Re: Vi Kapler's Phone #

--> Pietenpol-List message posted by: "M&M Stanley" <tomiya@di.mbn.or.jp>

Hi Jack,

I bought some hinges a month or 2 back. The number that I have for Vi is 
507-288-3322.  Call him in the evenings

Hope this helps

Mark S
Japan


From: "Textor, Jack" <jtextor@thepalmergroup.com>

> Hi all,
> I have been trying to reach Vi at 507-285-1645 for a couple weeks to buy 
> some hinges.  >


________________________________  Message 2  _____________________________________


Time: 05:15:23 AM PST US
From: <gcardinal@mn.rr.com>
Subject: Re: Pietenpol-List: alternative glues

--> Pietenpol-List message posted by: <gcardinal@mn.rr.com>

I used Aerolite for the rib assemblies on 
NX18235 and loved it.
Resin brushed on the capstrips / uprights and 
activator brushed on
the gussets. About 10 seconds after placing 
the gusset in place the
adhesive starts to set and the gusset is held 
firmly while the nails are
set.
I tried T-88 on two ribs and the gussets had 
a tendency to slide out of
place while trying to nail it in place.
Many Aerolite glue tests were done and all 
were satisfactory.

Greg Cardinal
Minneapolis


----- Original Message ----- 
From: "John Hofmann" 
<jhofmann@reesgroupinc.com>
Subject: Re: Pietenpol-List: alternative 
glues


> --> Pietenpol-List message posted by: John 
> Hofmann <jhofmann@reesgroupinc.com>
>
> The Mosquito used Areolite 
> (urea-formaldehyde). Alfred Scott did a 
> nice
> article on it here:
>
> http://www.seqair.com/skunkworks/Glues/Aerolite/Aerolite.html
>
> -john-
>


________________________________  Message 3  _____________________________________


Time: 05:25:14 AM PST US
From: "Oscar Zuniga" <taildrags@hotmail.com>
Subject: Pietenpol-List: FlyCorvair update

--> Pietenpol-List message posted by: "Oscar Zuniga" <taildrags@hotmail.com>

There is an update on William Wynne's hangar page, at 
http://www.flycorvair.com/hangar.html .  Included are some great details of 
Dave "The Bear" Vargesko's Wagabond project as well as a tribute to Steve 
"Fixer" Jones.  Also details of the upcoming "Corvair College" in November.

Oscar Zuniga
San Antonio, TX
mailto: taildrags@hotmail.com
website at http://www.flysquirrel.net