---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Mon 12/12/05: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:30 AM - Corvair website update (Oscar Zuniga) 2. 11:25 PM - Fw: (Robison) ________________________________ Message 1 _____________________________________ Time: 05:30:38 AM PST US From: "Oscar Zuniga" Subject: Pietenpol-List: Corvair website update --> Pietenpol-List message posted by: "Oscar Zuniga" William Wynne has updated his "at the hangar" page with more supplier info, this time on propellers and engine instrument recommendations, as well as some notes on the cost of reworking Corvair heads. The update is at http://www.flycorvair.com/hangar.html Oscar Zuniga San Antonio, TX mailto: taildrags@hotmail.com website at http://www.flysquirrel.net ________________________________ Message 2 _____________________________________ Time: 11:25:27 PM PST US From: "Robison" Subject: Pietenpol-List: Fw: ----- Original Message ----- From: Robison !! > Please including the following information with each submission: 1) Please post to the Pietenpol list 2) Scott Robison 3) robison@mchsi.com 4) Help-Confusion on wing spar fittings. 5) Hello everyone. I'm new to the list and new to airplane building and I need some direction. How many wing spar fittings do I need? The plans say 4 each with and without tabs for front and rear spar. Does this mean that there are 16 required? I'm confused. I've attached a copy of the plans for these fittings. 6-x) Description of photo: Plans for wing spar fittings.