Today's Message Index:
----------------------
1. 04:49 AM - Grega at Reklaw Texas, not a Pietenpol (Cuy, Michael D. (GRC-RXD0)[ASRC])
2. 04:31 PM - Re: Grega at Reklaw Texas, not a Pietenpol (Pietsrneat@aol.com)
3. 06:00 PM - Brodhead fly-in 2007 (shad bell)
4. 07:35 PM - Matronics Email List Fund Raiser - November! (Matt Dralle)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Grega at Reklaw Texas, not a Pietenpol |
--> Pietenpol-List message posted by: "Cuy, Michael D. (GRC-RXD0)[ASRC]" <michael.d.cuy@nasa.gov>
You guys know that I've made very supportive comments on behalf of the
GN-1 (and even flown one that
was quite nice....but heavy) but I find it annoying that a guy would
plaster a logo on the side of
something that is not/was not designed by Bernard Pietenpol. In some
cases buyers or builders don't know
that there is a difference between the two designs so if this is the
case with this yellow steel tube Grega
GN-1 then so be it, but otherwise it is a sham like the people who
advertise "Pietenpols" in Barnstormers or
on Ebay that are not Pietenpol designs.
Mike C.
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Grega at Reklaw Texas, not a Pietenpol |
Being a Piet purest, I could not agree more. Thanks again for the tape,
Mike. Did you get my snail mail?
Ron
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Brodhead fly-in 2007 |
Hello group, Just wondering the dates of the 2007 Piet fly-in at Brodhead. I have
to turn in my vacation bid at work in 2 weeks, and want to make sure to get
that week off. Update on NX92GB: ordered new crank case and crankshaft, at
first glace all cylinders look ok but will be mic'ed and all pistons and rods
look good so far. Dad is looking for local shop to machine the threads in a
new safety shaft, and thread the crankshaft for the safety shaft. Before all
the machine work he is going to get a magnaflux inspection on the crank. After
all the inspection work is done we will hopefully have it ready to go again
in a month or so. Spring thaw will probably be the next decent time to fly after
its all done.
Hope you all some great late fall flying,
Shad
---------------------------------
Get your email and see which of your friends are online - Right on the new Yahoo.com
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Matronics Email List Fund Raiser - November! |
--> Pietenpol-List message posted by: Matt Dralle <dralle@matronics.com>
Dear Listers,
Each November I hold a PBS-like fund raiser to support the continued operation
and upgrade of the List services at Matronics. It's through these sole Contributions
of List members that these Matronics Lists are possible.
You have probably noticed that there are no banner ads or pop-up windows on any of the Matronics Lists or related web sites such as the Forums site ( http://forums.matronics.com ), Wiki site ( http://wiki.matronics.com ), or other related pages such as the List Search Engine ( http://www.matornics.com/search ), List Browse ( http://www.matornics.com/listbrowse ), etc. This is because I believe in a List experience that is completely about the sport we all enjoy - namely Airplanes and not about annoying advertisments.
During the month of November I will be sending out List messages every few days
reminding everyone that the Fund Raiser is underway. Each message will generally
highlight a particular feature or benefit of the Matronics Lists or detail
a new feature or service that was added this year. I ask for your patience
and understanding during the Fund Raiser and throughout these regular messages.
The Fund Raiser is only financial support mechanism I have to pay all of the
bills associated with running these lists.
Once again, this year I've got a terrific line up of free gifts to go along with
the various Contribution levels. Most all of these gifts have been provided
by some of the vary members and vendors that you'll find on Matronics Lists and
have been either donated or provided at substantially discounted rates.
This year, these generous people include Bob Nuckolls of the AeroElectric Connection (http://www.aeroelectric.com/), Paul Besing of Aeroware Enterprises aka Kitlog Pro (http://www.kitlog.com/), Andy Gold of the Builder's Bookstore (http://www.buildersbooks.com/), and Jon Croke of HomebuiltHELP (http://www.homebuilthelp.com/).
These are extremely generous guys and I encourage you to visit their respective
web sites. Each one offers a unique and very useful aviation-related product
line. I would like publicly to thank Bob, Paul, Andy, and Jon for their generous
support of the Lists again this year!!
You can make your List Contribution using any one of three secure methods this
year including using a credit card, PayPal, or by personal check. All three methods
afford you the opportunity to select one of this year's free gifts with
a qualifying Contribution amount!!
To make your Contribution, please visit the secure site below:
https://www.matronics.com/contribution
I would like to thank everyone in advance for their generous financial AND moral
support over the years. I know it sounds a little cliche, but you guys really
do feel like family.
Thank you for your support!
Matt Dralle
Matronics Email List Administrator
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|