---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Sat 12/09/06: 14 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:47 AM - Re: Jack- you think you're old? II (Wizzard187@aol.com) 2. 05:19 AM - Re: Jack- you think you're old? II (Pietsrneat@aol.com) 3. 05:23 AM - wooden gear (Pietsrneat@aol.com) 4. 06:14 AM - Re: wooden gear (HelsperSew@aol.com) 5. 07:20 AM - movie inaccuracies done right--Airplane (Cuy, Michael D. (GRC-RXD0)[ASRC]) 6. 07:42 AM - CG Location (Larry Rice) 7. 08:08 AM - fire resistant paint (Dennis Engelkenjohn) 8. 09:07 AM - Re: fire resistant paint (walt evans) 9. 09:57 AM - 1/2 scale Piet on ebay (Cuy, Michael D. (GRC-RXD0)[ASRC]) 10. 12:13 PM - fire resistant paint (Dennis Engelkenjohn) 11. 03:36 PM - Re: fire resistant paint (walt evans) 12. 03:54 PM - Re: fire resistant paint (Dennis Engelkenjohn) 13. 08:02 PM - corvair air camper (Malcolmbru@aol.com) 14. 08:48 PM - Re: fire resistant paint (Clif Dawson) ________________________________ Message 1 _____________________________________ Time: 03:47:40 AM PST US From: Wizzard187@aol.com Subject: Re: Pietenpol-List: Jack- you think you're old? II Jack; Did you ever see Tom Mix reload his 6 gun? Ken HA ________________________________ Message 2 _____________________________________ Time: 05:19:42 AM PST US From: Pietsrneat@aol.com Subject: Re: Pietenpol-List: Jack- you think you're old? II In a message dated 12/9/2006 6:49:55 A.M. Eastern Standard Time, Wizzard187@aol.com writes: Jack; Did you ever see Tom Mix reload his 6 gun? Ken HA Tom Mix? Isn't that the guy who sell blenders on that infomercial? do not archive ________________________________ Message 3 _____________________________________ Time: 05:23:55 AM PST US From: Pietsrneat@aol.com Subject: Pietenpol-List: wooden gear Are the dimensions right in the '32 F&G Manual (page 17) for the white ash pieces? Seems like they should be 1 1/4 by 2 1/4 or something like that. Ron ________________________________ Message 4 _____________________________________ Time: 06:14:18 AM PST US From: HelsperSew@aol.com Subject: Re: Pietenpol-List: wooden gear Ron, Yes the 1 3/4" dimension is correct. Why do yo think it should be 2 1/4"? Dan Helsper Poplar Grove, IL. ________________________________ Message 5 _____________________________________ Time: 07:20:32 AM PST US Subject: Pietenpol-List: movie inaccuracies done right--Airplane From: "Cuy, Michael D. (GRC-RXD0)[ASRC]" I'll never forget in the winter of 1980 when myself and two other airplane nut buddies went to the theater to see the movie Airplane for the first time. Of the 70 or so people in the theater watching the opening scene of the jet airliner coming up thru the clouds, we were the only three in the whole place laughing our butts off because of the multi-engine recip sound clip they were using--something like a DC-6 or B-17 ! We got some weird looks but we didn't care--it was hilarious. Mike C. ________________________________ Message 6 _____________________________________ Time: 07:42:39 AM PST US From: Larry Rice Subject: Pietenpol-List: CG Location Remember that the tail is operating in the downwash from the wing, so even if the elevators are deflected down a bit, the tail may still be pushing down rather than up. Larry the micro mong guy -- ________________________________ Message 7 _____________________________________ Time: 08:08:50 AM PST US From: "Dennis Engelkenjohn" Subject: Pietenpol-List: fire resistant paint A while back someone posted about a fire retardant paint. does anyone know what it is and where to get it? dennis ________________________________ Message 8 _____________________________________ Time: 09:07:23 AM PST US From: "walt evans" Subject: Re: Pietenpol-List: fire resistant paint Yes, The Poly Fiber Process walt evans NX140DL "Put your wealth in knowledge, and no one can ever take it from you" Ben Franklin ----- Original Message ----- From: Dennis Engelkenjohn To: pietenpol-list@matronics.com Sent: Saturday, December 09, 2006 11:07 AM Subject: Pietenpol-List: fire resistant paint A while back someone posted about a fire retardant paint. does anyone know what it is and where to get it? dennis ________________________________ Message 9 _____________________________________ Time: 09:57:35 AM PST US Subject: Pietenpol-List: 1/2 scale Piet on ebay From: "Cuy, Michael D. (GRC-RXD0)[ASRC]" this is so pretty I'm sorry the gent didn't just built a full-scale one ! http://cgi.ebay.com/1930S-PIETENPOL-Scale-Giant-Gas-Flying-Airplane-Mode l_W0QQitemZ130054239356QQihZ003QQcategoryZ19164QQssPageNameZWDVWQQrdZ1QQ cmdZViewItem ________________________________ Message 10 ____________________________________ Time: 12:13:56 PM PST US From: "Dennis Engelkenjohn" Subject: Pietenpol-List: fire resistant paint The paint I am trying to find is for the firewall, I should have said that in my last post. dennis ________________________________ Message 11 ____________________________________ Time: 03:36:05 PM PST US From: "walt evans" Subject: Re: Pietenpol-List: fire resistant paint Don't know of firewalls that are painted. Mine is just galvanized steel and not painted. Do you have to paint it? walt evans NX140DL "Put your wealth in knowledge, and no one can ever take it from you" Ben Franklin ----- Original Message ----- From: Dennis Engelkenjohn To: pietenpol-list@matronics.com Sent: Saturday, December 09, 2006 3:11 PM Subject: Pietenpol-List: fire resistant paint The paint I am trying to find is for the firewall, I should have said that in my last post. dennis ________________________________ Message 12 ____________________________________ Time: 03:54:50 PM PST US From: "Dennis Engelkenjohn" Subject: Re: Pietenpol-List: fire resistant paint Actually, I am going to use stainless steel sheet. I didn't leave much room to get the bolt heads out of the motor mounts near the firewall. I am fessing up. you got to the truth. I don't know if there is room for the 1/8" fiberfrax. A buddy may have some asbestos sheet, but I prefer not to use it. The heat resistant paint is to paint the firewall wood under the SS. Dennis ----- Original Message ----- From: walt evans To: pietenpol-list@matronics.com Sent: Saturday, December 09, 2006 5:35 PM Subject: Re: Pietenpol-List: fire resistant paint Don't know of firewalls that are painted. Mine is just galvanized steel and not painted. Do you have to paint it? walt evans NX140DL "Put your wealth in knowledge, and no one can ever take it from you" Ben Franklin ----- Original Message ----- From: Dennis Engelkenjohn To: pietenpol-list@matronics.com Sent: Saturday, December 09, 2006 3:11 PM Subject: Pietenpol-List: fire resistant paint The paint I am trying to find is for the firewall, I should have said that in my last post. dennis href="http://www.aeroelectric.com">www.aeroelectric.com href="http://www.buildersbooks.com">www.buildersbooks.com href="http://www.kitlog.com">www.kitlog.com href="http://www.homebuilthelp.com">www.homebuilthelp.com href="http://www.matronics.com/contribution">http://www.matronics.com/c href="http://www.matronics.com/Navigator?Pietenpol-List">http://www.mat ronics.com/Navigator?Pietenpol-List ________________________________ Message 13 ____________________________________ Time: 08:02:07 PM PST US From: Malcolmbru@aol.com Subject: Pietenpol-List: corvair air camper I need lots of info on a corvair powered aircamper I am this close to buying matronics is great i belong to the kit fox forem also malcolm michigan ________________________________ Message 14 ____________________________________ Time: 08:48:14 PM PST US From: Clif Dawson Subject: Re: Pietenpol-List: fire resistant paint Try this; http://www.flameseal.com/fxWFdesc.html Clif ----- Original Message ----- From: Dennis Engelkenjohn To: pietenpol-list@matronics.com Sent: Saturday, December 09, 2006 3:53 PM Subject: Re: Pietenpol-List: fire resistant paint Actually, I am going to use stainless steel sheet. I didn't leave much room to get the bolt heads out of the motor mounts near the firewall. I am fessing up. you got to the truth. I don't know if there is room for the 1/8" fiberfrax. A buddy may have some asbestos sheet, but I prefer not to use it. The heat resistant paint is to paint the firewall wood under the SS. Dennis ----- Original Message ----- From: walt evans To: pietenpol-list@matronics.com Sent: Saturday, December 09, 2006 5:35 PM Subject: Re: Pietenpol-List: fire resistant paint Don't know of firewalls that are painted. Mine is just galvanized steel and not painted. Do you have to paint it? walt evans NX140DL "Put your wealth in knowledge, and no one can ever take it from you" Ben Franklin ----- Original Message ----- From: Dennis Engelkenjohn To: pietenpol-list@matronics.com Sent: Saturday, December 09, 2006 3:11 PM Subject: Pietenpol-List: fire resistant paint The paint I am trying to find is for the firewall, I should have said that in my last post. dennis href="http://www.aeroelectric.com">www.aeroelectric.com href="http://www.buildersbooks.com">www.buildersbooks.com href="http://www.kitlog.com">www.kitlog.com href="http://www.homebuilthelp.com">www.homebuilthelp.com href="http://www.matronics.com/contribution">http://www.matronics.com/c href="http://www.matronics.com/Navigator?Pietenpol-List">http://www.mat ronics.com/Navigator?Pietenpol-List href="http://www.aeroelectric.com">www.aeroelectric.com href="http://www.buildersbooks.com">www.buildersbooks.com href="http://www.kitlog.com">www.kitlog.com href="http://www.homebuilthelp.com">www.homebuilthelp.com href="http://www.matronics.com/contribution">http://www.matronics.com/c href="http://www.matronics.com/Navigator?Pietenpol-List">http://www.mat ronics.com/Navigator?Pietenpol-List ------------------------------------------------------------------------- ----- 12/9/2006 3:41 PM ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.