Pietenpol-List Digest Archive

Fri 12/29/06


Total Messages Posted: 18



Today's Message Index:
----------------------
 
     1. 10:44 AM - Pietenpol as babe magnet? (Oscar Zuniga)
     2. 11:18 AM - babe magnet? (Cuy, Michael D. (GRC-RXD0)[ASRC])
     3. 11:48 AM - Re: Pietenpol as babe magnet? (Rick Holland)
     4. 11:50 AM - Re: Pietenpol as babe magnet? (gcardinal)
     5. 12:28 PM - Re: Pietenpol as babe magnet? (Rick Holland)
     6. 01:32 PM - what do they say ? (Cuy, Michael D. (GRC-RXD0)[ASRC])
     7. 01:39 PM - corvair motor mount rubber bushings (TGSTONE236@aol.com)
     8. 01:50 PM - Pietenpol (lshutks@webtv.net (Leon Stefan))
     9. 02:06 PM - Re: Torch Tips (lshutks@webtv.net (Leon Stefan))
    10. 02:51 PM - Re: corvair motor mount rubber bushings (Ben Charvet)
    11. 03:10 PM - Re: corvair motor mount rubber bushings (Barry Davis)
    12. 05:00 PM - motor mount bushings (TGSTONE236@aol.com)
    13. 05:20 PM - Re: what do they say ? (Rcaprd@aol.com)
    14. 06:02 PM - Re: what do they say ? (Pietsrneat@aol.com)
    15. 06:02 PM - Re: corvair motor mount rubber bushings (Rick Holland)
    16. 06:18 PM - Re: Pietenpol-List Digest: 2 Msgs - 12/28/06 (Bill Weir)
    17. 06:36 PM - Re: what do they say ? (Rick Holland)
    18. 08:27 PM - Re: Re: Elevators (Steve Singleton)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:44:14 AM PST US
    From: "Oscar Zuniga" <taildrags@hotmail.com>
    Subject: Pietenpol as babe magnet?
    I don't know what it is about the Pietenpol, but women do seem to like them. I get the same comment from just about every lady that has seen 41CC: it's cute and they want a ride in it. Must be the romance of flying in an open cockpit with hair and scarf waving in the wind. Most of the men who look at the airplane seem to be, how shall I say this, "gravitationally challenged" as well as "showing the experience of many years"... not old and fat ;o) I do wish more youngsters realized the beauty of these older designs and could just unhook themselves from the electronics and glass panels for a minute or two. One look in the cockpit and most of the kid types seem to wander on to something more exciting. And almost without exception, every non-pilot that looks at the Pietenpol asks where the radio is. When told that it has no radio and not even an electrical system, they go white with horror that I could fly it without "permission from the tower" or without being "in radar contact with somebody". My A&P should be back in the saddle by Wednesday after New Year's, so it shouldn't be long now before we'll be able to taxi test and flight test after he pulls the annual on it. Oscar Zuniga San Antonio, TX mailto: taildrags@hotmail.com website at http://www.flysquirrel.net _________________________________________________________________ Get FREE Web site and company branded e-mail from Microsoft Office Live


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 11:18:08 AM PST US
    Subject: babe magnet?
    From: "Cuy, Michael D. (GRC-RXD0)[ASRC]" <michael.d.cuy@nasa.gov>
    Get used to it, Oscar ! Those RV guys don't have all the chicks yet:)


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 11:48:54 AM PST US
    From: "Rick Holland" <at7000ft@gmail.com>
    Subject: Re: Pietenpol as babe magnet?
    Thank you Oscar, you just gave me a way to justify to my fellow Piet builders adding electronic elevator trim (with an LED position sensor) and an I-K AIM Lite engine monitor to my Piet (Corvair engine). Now I can just say that I am attempting to bridge the generation gap by getting all these video game playing kids interested in aviation. Rick I do wish more youngsters realized the beauty > of these older designs and could just unhook themselves from the > electronics > and glass panels for a minute or two. One look in the cockpit and most of > the kid types seem to wander on to something more exciting. And almost > without exception, every non-pilot that looks at the Pietenpol asks where > the radio is. When told that it has no radio and not even an electrical > system, they go white with horror that I could fly it without "permission > from the tower" or without being "in radar contact with somebody". > > My A&P should be back in the saddle by Wednesday after New Year's, so it > shouldn't be long now before we'll be able to taxi test and flight test > after he pulls the annual on it. > > Oscar Zuniga > San Antonio, TX > mailto: taildrags@hotmail.com > website at http://www.flysquirrel.net > > _________________________________________________________________ > Get FREE Web site and company branded e-mail from Microsoft Office Live > > -- Rick Holland "Logic is a wreath of pretty flowers, that smell bad"


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 11:50:56 AM PST US
    From: "gcardinal" <gcardinal@comcast.net>
    Subject: Re: Pietenpol as babe magnet?
    ----- Original Message ----- From: "Oscar Zuniga" <taildrags@hotmail.com> Subject: Pietenpol-List: Pietenpol as babe magnet? > > I don't know what it is about the Pietenpol, but women do seem to like > them. I get the same comment from just about every lady that has seen > 41CC: it's cute and they want a ride in it. Must be the romance of flying > in an open cockpit with hair and scarf waving in the wind. > Confirmed! ; )


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 12:28:57 PM PST US
    From: "Rick Holland" <at7000ft@gmail.com>
    Subject: Re: Pietenpol as babe magnet?
    Yea but what to the babes say when they see that fat old guy climb out of the cockpit and take off his scarf and goggles ? do not archive On 12/29/06, gcardinal <gcardinal@comcast.net> wrote: > > > > ----- Original Message ----- > From: "Oscar Zuniga" <taildrags@hotmail.com> > Subject: Pietenpol-List: Pietenpol as babe magnet? > > > > > > I don't know what it is about the Pietenpol, but women do seem to like > > them. I get the same comment from just about every lady that has seen > > 41CC: it's cute and they want a ride in it. Must be the romance of > flying > > in an open cockpit with hair and scarf waving in the wind. > > > > Confirmed! ; ) > > -- Rick Holland "Logic is a wreath of pretty flowers, that smell bad"


    Message 6


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 01:32:18 PM PST US
    Subject: what do they say ?
    From: "Cuy, Michael D. (GRC-RXD0)[ASRC]" <michael.d.cuy@nasa.gov>
    but what to the babes say when they see that fat old guy climb out of the cockpit ? Say Rick, I can tell you first-hand what the babes say when an old fat guy gets out of the cockpit: "what a cute little plane you have, sir " I learned quickly that the women are really not interested in the pilot at all, unless he is a soap-look-alike, but tis the airplane that attracts them. Mike C. Happy New Year, guys !


    Message 7


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 01:39:25 PM PST US
    From: TGSTONE236@aol.com
    Subject: corvair motor mount rubber bushings
    I am wondering where you guys with the Corvair motors are getting your motor mount bushings. Any information will be appreciated. Thanks Ted Stone Wilmington NC


    Message 8


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 01:50:41 PM PST US
    From: lshutks@webtv.net (Leon Stefan)
    Subject: Pietenpol
    Babe magnet--I wish mine was flying. I would fly it to the bar this new years eve. Leon S. Actually I'm setting home Sun. night to protect the driver license/job. Do not archive.


    Message 9


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 02:06:30 PM PST US
    From: lshutks@webtv.net (Leon Stefan)
    Subject: Re: Torch Tips
    I got a cutting torch with my Smith torch kit. It doesn't work well on thin material. 1/8 or thicker it works good. I wish I could afford a plasma cutter for fittings made of thin material. I used the cutting torch to cut some landing gear ( lower and upper shock strut lugs ) fittings from 1/4" material. I have also used it a lot for other things here on the farm. I learned not to use too small a tip on welding. The gas/ox works as a coolant for the tip. Using too small a tip allowed the tip to get to hot and the gas-ox will ignite inside the tip causing that annoying POP that blows your puddle away in a shower of sparks. (and could burn your house down.) Leon S. in Ks. dodging another Col. blizzard.


    Message 10


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 02:51:35 PM PST US
    From: Ben Charvet <bcharvet@bellsouth.net>
    Subject: Re: corvair motor mount rubber bushings
    I ordered mine from Advance Auto Parts. I believe the part specified in William Wynn's book is the same one that fits a 96 Ford Explorer's sway bar. I was ordering some other stuff and just added that to my order so the shipping was free. :-) Ben Charvet Mims, Fl > I am wondering where you guys with the Corvair motors are getting your > motor mount bushings. Any information will be appreciated. > > Thanks > //


    Message 11


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:10:44 PM PST US
    From: "Barry Davis" <bed@mindspring.com>
    Subject: Re: corvair motor mount rubber bushings
    The part # is 9.8105R AutoZone stocks them. Barry ----- Original Message ----- From: TGSTONE236@aol.com To: pietenpol-list@matronics.com Sent: Friday, December 29, 2006 4:39 PM Subject: Pietenpol-List: corvair motor mount rubber bushings I am wondering where you guys with the Corvair motors are getting your motor mount bushings. Any information will be appreciated. Thanks Ted Stone Wilmington NC


    Message 12


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:00:40 PM PST US
    From: TGSTONE236@aol.com
    Subject: motor mount bushings
    Thanks for the info on the bushings.I just picked them up for $15.00. You couldn't ask for a better price than that for a complete set. Ted Stone


    Message 13


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:20:36 PM PST US
    From: Rcaprd@aol.com
    Subject: Re: what do they say ?
    In a message dated 12/29/2006 4:34:44 P.M. Eastern Standard Time, michael.d.cuy@nasa.gov writes: I learned quickly that the women are really not interested in the pilot at all, unless he is a soap-look-alike, but tis the airplane that attracts them. Yeah, but I still like to get a picture of them, as they are climbing in !! :) he, he, he Chuck G.


    Message 14


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:02:45 PM PST US
    From: Pietsrneat@aol.com
    Subject: Re: what do they say ?
    In a message dated 12/29/2006 8:22:02 P.M. Eastern Standard Time, Rcaprd@aol.com writes: Yeah, but I still like to get a picture of them, as they are climbing in !! :) he, he, he Chuck G. Man, that is RUDE! Do you have any of those "empennage" pics on your web site? Please, do not archive.


    Message 15


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:02:46 PM PST US
    From: "Rick Holland" <at7000ft@gmail.com>
    Subject: Re: corvair motor mount rubber bushings
    Believe it or not, even Amazon has them, got mine with my last book. Rick On 12/29/06, TGSTONE236@aol.com <TGSTONE236@aol.com> wrote: > > I am wondering where you guys with the Corvair motors are getting your > motor mount bushings. Any information will be appreciated. > > Thanks > ** > *Ted Stone* > *Wilmington NC* > > * > > > * > > -- Rick Holland "Logic is a wreath of pretty flowers, that smell bad"


    Message 16


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:18:41 PM PST US
    From: "Bill Weir" <billweir@lon.imag.net>
    Subject: Re: Pietenpol-List Digest: 2 Msgs - 12/28/06
    Re plywood, A friend who had a small used car lot built a KR-2 a few years ago that is still flying. He used "door skin" that he bought at the local lumberyard for plywood to make those pieces that cover the joints. To test, he put a piece on the floor of his car wash bay and left it for a year or so. It did not deteriorate ate and he felt free to use the material in his aircraft project. But! Don't take my word. Do your own test! Bill weir


    Message 17


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:36:23 PM PST US
    From: "Rick Holland" <at7000ft@gmail.com>
    Subject: Re: what do they say ?
    My wife will be glad to hear that. Rick do not archive On 12/29/06, Cuy, Michael D. (GRC-RXD0)[ASRC] <michael.d.cuy@nasa.gov> wrote: > > but what to the babes say when they see that fat old guy climb out of > the cockpit ? > > Say Rick, I can tell you first-hand what the babes say when an old fat guy > gets out of the cockpit: "what a cute little plane you have, sir " > I learned quickly that the women are really not interested in the pilot at > all, unless he is a soap-look-alike, but tis the airplane that attracts > them. > > Mike C. > > Happy New Year, guys ! > > > * > > > * > > -- Rick Holland "Logic is a wreath of pretty flowers, that smell bad"


    Message 18


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:27:31 PM PST US
    From: "Steve Singleton" <slsingleton@cvalley.net>
    Subject: Re: Elevators
    ----- Dick-I live near Hale MO. about two hr drive North east of KC MO. I'd sure like to hear from somebody that has used the marine plywood. If there is anybody within a 2 or 3 hour drive of me that has any sruce to sell to make the longerons i'd sure be interested in buying it. I believe i have enough for the rest of the fuseledge. If i have to make the 4 1/2 hour drive to Wicks fore my longeron material then I'l probable get the plywood there also. > <horzpool@goldengate.net> > > Steve > When posting this type of thing, it would be helpful to include where you > live. Somebody may well have a local source for you. > Dick N. > ----- Original Message ----- > From: "Steve Singleton" <slsingleton@cvalley.net> > To: <pietenpol-list@matronics.com> > Sent: Wednesday, December 27, 2006 9:19 PM > Subject: Re: Pietenpol-List: Re: Elevators > > >> -->




    Other Matronics Email List Services

  • Post A New Message
  •   pietenpol-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Pietenpol-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/pietenpol-list
  • Browse Pietenpol-List Digests
  •   http://www.matronics.com/digest/pietenpol-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --