Today's Message Index:
----------------------
1. 03:38 AM - Re: Pietenpol Directory (pietflyr)
2. 03:56 AM - Re: Pietenpol-list: Pietenpol Directory (Wayne Poole)
3. 04:35 AM - Re: Pietenpol Directory (Jack T. Textor)
4. 05:28 AM - Re: Pietenpol Directory (Ed G.)
5. 05:44 AM - Re: Pietenpol Directory (gcardinal)
6. 06:29 AM - Re: Pietenpol Directory (Mike King)
7. 06:41 AM - Re: Pietenpol Directory (HVandervoo@aol.com)
8. 06:59 AM - Re: Pietenpol Directory (Cuy, Michael D. (GRC-RXD0)[ASRC])
9. 07:00 AM - Re: Pietenpol Directory (skellytownflyer)
10. 08:08 AM - Re: Pietenpol Directory (Rcaprd@aol.com)
11. 08:26 AM - Re: Pietenpol Directory (Javier Cruz)
12. 08:44 AM - Re: Pietenpol Directory (Amsafetyc@aol.com)
13. 09:16 AM - Re: Pietenpol Directory (TGSTONE236@aol.com)
14. 09:41 AM - Re: Pietenpol Directory (Rick Holland)
15. 10:42 AM - Re: Pietenpol Directory (Gordon Bowen)
16. 11:16 AM - Re: Pietenpol Directory (Alan Lyscars)
17. 11:31 AM - pietenpol directory (RBush96589@aol.com)
18. 12:36 PM - Re: Pietenpol Directory (Tom Stinemetze)
19. 12:44 PM - Re: Pietenpol Directory (Bill Church)
20. 02:31 PM - Re: Pietenpol Directory (Ryan Michalkiewicz)
21. 02:45 PM - WOW! Corky, Pietenpol Directory (walt evans)
22. 03:17 PM - Pietenpol Directory (Oscar Zuniga)
23. 03:26 PM - Re: Pietenpol Directory (Gene Rambo)
24. 03:33 PM - Re: Pietenpol Directory (Isablcorky@aol.com)
25. 04:14 PM - Re: Pietenpol Directory (Ed G.)
26. 04:40 PM - Re: Pietenpol Directory (jimboyer@hughes.net)
27. 05:30 PM - Re: Pietenpol Directory (Gordon Bowen)
28. 05:55 PM - Re: Pietenpol Directory (Amsafetyc@aol.com)
29. 06:04 PM - piet directory (Donald Lane)
30. 06:28 PM - Re: Pietenpol Directory (Tom Bernie)
31. 07:10 PM - Re: Elevator cables (Rick Holland)
32. 07:16 PM - Wood Landing Gear Strut Fitting (Catdesigns)
33. 07:17 PM - Wood Landing Gear Strut Fitting (Catdesigns)
34. 07:22 PM - Re: Pietenpol Directory (Catdesigns)
35. 07:37 PM - Re: Re Elevator cables (Rick Holland)
36. 07:54 PM - Re: Pietenpol Directory (Isablcorky@aol.com)
37. 08:29 PM - Re: Pietenpol Directory (Arden Adamson)
38. 08:45 PM - Re: Wood Landing Gear Strut Fitting (gcardinal)
39. 08:50 PM - Re: Pietenpol Directory (Steve Eldredge)
40. 09:17 PM - Re: Wood Landing Gear Strut Fitting (Catdesigns)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Pietenpol Directory |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 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Pietenpol-list: Pietenpol Directory |
My address is 8465 Harold Drive in Denham Springs, Louisiana 70726. I have
a GN-1 95%complete with a Continental 0-200 and a Sensenich 72 x 44 prop. It
has a wooden fuselage and three piece wing.
Wayne Poole
dxechkn@earthlink.net
EarthLink Revolves Around You.
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Pietenpol Directory |
Jack Textor
29 SW 58th Drive
Des Moines, IA 50312
515-225-7000 wk
515-277-4173 hm
www.textors.com
Piet tail, ribs and spars done, fuselage 75%
Thanks Corky
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Pietenpol Directory |
Ed Grentzer...3714 Desoto Blvd. Palm Harbor, Florida
34683...727-942-4213.... Pietenpol A/C, complete except for right wing,
struts, covering and paint. 80 hp Franklin 4AC176FE with 72x42 Tennessee
prop mounted and almost ready to run.
----- Original Message -----
From: Jack T. Textor<mailto:jtextor@thepalmergroup.com>
To: pietenpol-list@matronics.com<mailto:pietenpol-list@matronics.com>
Sent: Sunday, June 10, 2007 7:29 AM
Subject: RE: Pietenpol-List: Pietenpol Directory
Jack Textor
29 SW 58th Drive
Des Moines, IA 50312
515-225-7000 wk
515-277-4173 hm
www.textors.com<http://www.textors.com/>
Piet tail, ribs and spars done, fuselage 75%
Thanks Corky
http://www.matronics.com/Navigator?Pietenpol-List<http://www.matronics.co
m/Navigator?Pietenpol-List>
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Pietenpol Directory |
Dale Johnson / Greg Cardinal
Minneapolis, Minnesota
Air Camper NX18235 (one of Bernard's original n-numbers)
Long fuselage
A-65
Brakeless "Jenny" style landing gear
Climbs about 300 fpm
Cruises 75 - 80 mph
----- Original Message -----
From: Isablcorky@aol.com
To: pietenpol-list@matronics.com
Sent: Saturday, June 09, 2007 5:34 PM
Subject: Pietenpol-List: Pietenpol Directory
Isabelle frequently asks where some Pieter lives when I mention
something said or done on this list. I always have to say, " dang if I
know". So I'm starting with this e mail to create some sort of
directory. At least list your name, status of your aircraft, and city
and state. If you desire to disclose more info thats your business. At
least let it be known whether you're yank, reb, or californian type. If
this e mail has no more than one name during the next week I'll get the
message.
Claude M Corbett, "Corky" "Nathan" "Levi" Refurbishing a
complete Aeronca L-3 65TAC
625 Pierremont Rd
Defender.
Shreveport, La 71106
2.
-------------------------------------------------------------------------
-----
See what's free at AOL.com.
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Pietenpol Directory |
Mike King
P.O. Box 598
Ponder, Texas 76259
(may be moving to Corpus Christi soon)
214.905.9299
GN-1
77MK
Continental A-80
McCauley metal 69x39 prop
Flying since built in 1985
Dual controls and instruments
ELT, radio antenna, hydraulic brakes (rear only)
Three section wing with rear cutout
----- Original Message -----
From: Roman Bukolt
To: pietenpol-list@matronics.com
Sent: Saturday, June 09, 2007 6:25 PM
Subject: Re: Pietenpol-List: Pietenpol Directory
2. Roman Bukolt Pietenpol air Camper partially
built in my basement.
6505 Urich Terrace Fuse about 80% done. Also
rebuilding a Corvair motor
Madison, wi. 53719 Meanwhile I bought and am flying a
1990 Pietenpol NX20795
conceptmodels@tds.net mentioned in Chet Peeks book, built by
Ray Hill and wife.
----- Original Message -----
From: Isablcorky@aol.com
To: pietenpol-list@matronics.com
Sent: Saturday, June 09, 2007 5:34 PM
Subject: Pietenpol-List: Pietenpol Directory
Isabelle frequently asks where some Pieter lives when I mention
something said or done on this list. I always have to say, " dang if I
know". So I'm starting with this e mail to create some sort of
directory. At least list your name, status of your aircraft, and city
and state. If you desire to disclose more info thats your business. At
least let it be known whether you're yank, reb, or californian type. If
this e mail has no more than one name during the next week I'll get the
message.
Claude M Corbett, "Corky" "Nathan" "Levi" Refurbishing a
complete Aeronca L-3 65TAC
625 Pierremont Rd
Defender.
Shreveport, La 71106
2.
-------------------------------------------------------------------------
---
See what's free at AOL.com.
href="http://www.matronics.com/Navigator?Pietenpol-List">http://www.mat
ronics.com/Navigator?Pietenpol-List
href="http://forums.matronics.com">http://forums.matronics.com
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Pietenpol Directory |
Hans vander Voort
32226 windrose lane
Waller, Texas
Flying Pietenpol Aircamper
with Corvair engine.
_http://www.frappr.com/pietenpol_ (http://www.frappr.com/pietenpol)
************************************** See what's free at http://www.aol.com.
Message 8
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Pietenpol Directory |
Michael Cuy (The Yankee Boy named by Corky)
298 Runn Street
Berea, OH 44017
Short Fuselage (1933) A-65 Pietenpol Air Camper
3 piece wing
Nose fuel tank, 17 gallons
Center section wing baggage area
Empty Weight: 632 lbs.
Flying since June, 1998
400 TT give or take
Last flight: yesterday.
Message 9
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Pietenpol Directory |
Raymond Hanover-Skellytown Texas. (in the panhande)-GN-1 with Corvair power. (
D.J. Vegh's project) wings almost ready for fabric-just finished installing aluminum
leadng edge.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=117602#117602
Message 10
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Pietenpol Directory |
Chuck Gantzer
626 Pattie
Wichita, KS 67211
Pietenpol AirCamper NX770CG
_http://nx770cg.com/_ (http://nx770cg.com/)
Just over 300 hrs TT
Short Fuselage, Split Axle Gear, Turf Tires
Continental A65, Homebuilt 72 X 42 Prop
I love flying this plane !!
************************************** See what's free at http://www.aol.com.
Message 11
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Pietenpol Directory |
Hi friends
The last week i finished my pilot chief work on the PGR in Mexico, just
work now like a G-II pilot, so i think that finally i have enought time
for complete my project.
Corky, good to know that you are still active on this list.\
Javier Cruz "JAVCR"
Valle de casas 202, Valle de Aragon,
Mexico, Mexico
Fuselage, wings, tail group complete, just needs epoxic varnish for
cover.
Corvair engine with 16:00 hours on test stand and now on the plane. (i
need to remove it for complete the firewall fiberfrax install)
Good luck on your list Corky
Message 12
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Pietenpol Directory |
Corkey
John Recine here in Lititz Pennsylvania
Home of the PA. Dutch
Piet long fuse. Fuse under const
Worked Katrina recovery Plaq and Orleans parrish
Regards
John
NX985BP
Sent from my Verizon Wireless BlackBerry
-----Original Message-----
From: Isablcorky@aol.com
To:pietenpol-list@matronics.com
Subject: Pietenpol-List: Pietenpol Directory
Isabelle frequently asks where some Pieter lives when I mention something said
or done on this list. I always have to say, " dang if I know". So I'm starting
with this e mail to create some sort of directory. At least list your name, status
of your aircraft, and city and state. If you desire to disclose more info
thats your business. At least let it be known whether you're yank, reb, or californian
type. If this e mail has no more than one name during the next week
I'll get the message.
Claude M Corbett, "Corky" "Nathan" "Levi" Refurbishing a complete Aeronca L-3 65TAC
625 Pierremont Rd Defender.
Shreveport, La 71106
2.
----------------
Message 13
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Pietenpol Directory |
Ted Stone
Wilmington NC
Piet short fuselage on gear
tail feathers completed
64 Corvair engine with prop hub installed came with project I took over. I
have to open engine to see what has been done.have stromberg carb,and large oil
cooler. distributer hasn't been upgraded
spruce spars cut and routed with ribs installed on one and ribs just slid on
other wing. nothing done on center section yet.
maybe 25 to 35% completed
************************************** See what's free at http://www.aol.com.
Message 14
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Pietenpol Directory |
Rick Holland
3732 Castle Butte Dr
Castle Rock, CO 80109
Long fuselage Piet
Cub (GN1) style gear
Corvair engine half built
Wings and tail ready for cover
Fuse 90%
Message 15
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Pietenpol Directory |
Commander Corky,
Sir, I am proud to report, N-1033B is in A-1 flying condition in hanger
Palatka FL, guarding FL's sunny St. Augustine area. The good ship has a
steel fuse, aeronca wings, cessna wheels and brakes, 0-235 engine (Sir,
can I still call it a Piete?, think Bernard would be proud?), no smoke,
but can install beer can holder on gunnel to hold water ballons if so
ordered.
Reporting in: Gordon Bowen
P.O. Box 2201 (so far out the end of the road, ain't
got RFD service.)
Homely ole Homer AK (as far as you can git northwest
without a russkie passport)
Gordon
----- Original Message -----
From: Isablcorky@aol.com
To: pietenpol-list@matronics.com
Sent: Saturday, June 09, 2007 2:34 PM
Subject: Pietenpol-List: Pietenpol Directory
Isabelle frequently asks where some Pieter lives when I mention
something said or done on this list. I always have to say, " dang if I
know". So I'm starting with this e mail to create some sort of
directory. At least list your name, status of your aircraft, and city
and state. If you desire to disclose more info thats your business. At
least let it be known whether you're yank, reb, or californian type. If
this e mail has no more than one name during the next week I'll get the
message.
Claude M Corbett, "Corky" "Nathan" "Levi" Refurbishing a
complete Aeronca L-3 65TAC
625 Pierremont Rd
Defender.
Shreveport, La 71106
2.
-------------------------------------------------------------------------
-----
See what's free at AOL.com.
Message 16
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Pietenpol Directory |
Al Lyscars
Portland, Maine
Just started GN-1 from scratch.
12 fittings and three ribs completed.
Corvair core aquired.
Union boy.
Greetings, Corky!
Message 17
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | pietenpol directory |
Robert ( Randy ) Bush
2945 Law RD
Lexington TN 38351
Corvair powered pietenpol ready for paint
************************************** See what's free at http://www.aol.com.
Message 18
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Pietenpol Directory |
<At least list your name, status of your aircraft, and city and state.
If you desire to disclose more info thats your business. >
Tom Stinemetze, McPherson, Kansas. Pietenpol Air Camper - 3 years into
an estimated 5-year project.
Ribs completed with spars just a'waitin. Fuselage & empennage about 90%
done. Ready to install control cables as sticks and elevator (flipper)
bellcrank are in place. Corvair engine torn down and cleaned up.
____ | ____
\8/
/ \
Message 19
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Pietenpol Directory |
Bill Church
Richmond Hill, Ontario, Canada
(Canuck)
Building long fuse Air Camper
Ribs built as of June 2007. (Project stalled for past year, but about
to get going again - garage workshop is almost ready)
Message 20
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Pietenpol Directory |
Ryan, Brystal and Contessa
Lake Wales, Florida
Building streched, Widend Pietenpol
Wood ordered, have core Corvair
pietn38b@aol.com wrote:
Sorry, hit the send button to soon
Jim Ballew
Collinsville, Oklahoma
Completed a Corvair powered Piet in 1995
69" warp drive prop
Also have a Corvair powered Davis DA-2A completed in 1987
---------------------------------
See what's free at AOL.com.
---------------------------------
Fussy? Opinionated? Impossible to please? Perfect. Join Yahoo!'s user panel and
lay it on us.
Message 21
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | WOW! Corky, Pietenpol Directory |
Corky,
Sure hit a good nerve with this.
Haven't seen this much activity for awhile
Good call!!
Walt Evans
NX140DL
"No one ever learned anything by talking"
Message 22
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Pietenpol Directory |
Well, I've got to say that probably 3/4 of the people on this list either
own Piets, GN-1s, or at least have a registration number for their project.
That being the case, most of the folks on this list already appear in Doc
Mosher's nifty little Piet directory and it's a great resource if you're
looking for someone. However, I'll give my contact info here for ya, Corky
(as if you didn't already have it ;o)
PS- yesterday I found the secret to perfect landings in 41CC: land it on
grass! You never even know the tires arrive on the grass. I love it!
Oscar Zuniga
8614 Waldon Heights
San Antonio, TX 78254
happily flying Corky's pride and joy, Pietenpol Aircamper NX41CC with A65-8
power!
mailto: taildrags@hotmail.com
website at http://www.flysquirrel.net/piets/CorkyPiet.html
_________________________________________________________________
Dont miss your chance to WIN $10,000 and other great prizes from Microsoft
Message 23
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Pietenpol Directory |
Gene & Karen Rambo (&Will) Pietenpol Air Camper, fuselage nearly
finished,
305 Riley Street straight axle landing gear
giving fits,
Falls Church, VA 22046 model A Ford, waiting on radiator
(hint, hint)
703-536-0909 Flying Travel Air 2000,
Staggerwing project, CRJ for hire
generambo@msn.com<mailto:generambo@msn.com>
----- Original Message -----
From: Roman Bukolt<mailto:conceptmodels@tds.net>
To: pietenpol-list@matronics.com<mailto:pietenpol-list@matronics.com>
Sent: Saturday, June 09, 2007 7:25 PM
Subject: Re: Pietenpol-List: Pietenpol Directory
2. Roman Bukolt Pietenpol air Camper partially
built in my basement.
6505 Urich Terrace Fuse about 80% done. Also
rebuilding a Corvair motor
Madison, wi. 53719 Meanwhile I bought and am flying a
1990 Pietenpol NX20795
conceptmodels@tds.net<mailto:conceptmodels@tds.net>
mentioned in Chet Peeks book, built by Ray Hill and wife.
----- Original Message -----
From: Isablcorky@aol.com<mailto:Isablcorky@aol.com>
To:
pietenpol-list@matronics.com<mailto:pietenpol-list@matronics.com>
Sent: Saturday, June 09, 2007 5:34 PM
Subject: Pietenpol-List: Pietenpol Directory
Isabelle frequently asks where some Pieter lives when I mention
something said or done on this list. I always have to say, " dang if I
know". So I'm starting with this e mail to create some sort of
directory. At least list your name, status of your aircraft, and city
and state. If you desire to disclose more info thats your business. At
least let it be known whether you're yank, reb, or californian type. If
this e mail has no more than one name during the next week I'll get the
message.
Claude M Corbett, "Corky" "Nathan" "Levi" Refurbishing a
complete Aeronca L-3 65TAC
625 Pierremont Rd
Defender.
Shreveport, La 71106
2.
-------------------------------------------------------------------------
---
See what's free at
AOL.com<http://www.aol.com/?ncid=AOLAOF00020000000503>.
href="http://www.matronics.com/Navigator?Pietenpol-List">http://www.mat
ronics.com/Navigator?Pietenpol-List
href="http://forums.matronics.com">http://forums.matronics.com
http://www.matronics.com/Navigator?Pietenpol-List<http://www.matronics.co
m/Navigator?Pietenpol-List>
Message 24
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Pietenpol Directory |
Oscar,
I didn't know about Doc Mosher's Pietenpol Directory or I would never had
started this one. Oh well, maybe there are new folks like me that like to see
their name in lights. Hope we can finish what is started
Corky
************************************** See what's free at http://www.aol.com.
Message 25
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Pietenpol Directory |
Correct me if I'm wrong but I think Doc Mosher's excellent directory
only includes finished/flying Piets. It would be nice to have a similar
directory that includes builders. And....Please add that my Piet is a
1933 version, short fuse with split gear.
Ed Grentzer
----- Original Message -----
From: Isablcorky@aol.com<mailto:Isablcorky@aol.com>
To: pietenpol-list@matronics.com<mailto:pietenpol-list@matronics.com>
Sent: Sunday, June 10, 2007 6:26 PM
Subject: Re: Pietenpol-List: Pietenpol Directory
Oscar,
I didn't know about Doc Mosher's Pietenpol Directory or I would never
had started this one. Oh well, maybe there are new folks like me that
like to see their name in lights. Hope we can finish what is started
Corky
-------------------------------------------------------------------------
-----
See what's free at
AOL.com<http://www.aol.com/?ncid=AOLAOF00020000000503>.
http://www.matronics.com/Navigator?Pietenpol-List<http://www.matronics.co
m/Navigator?Pietenpol-List>
Message 26
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Pietenpol Directory |
Jim Boyer number reserved now; 499JB
Santa Rosa, CA 95403
Pietenpol Aircamper, Corvair power (have engine ready to build once crank is nitrided)
All wing ribs done, tail surfaces done, fuselage wood structure done, control sticks
assembly done
Working on steel aileron, stabilizer, rudder horns.
Cheers, Jim
Message 27
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Pietenpol Directory |
Commander Corky,
Actually, Sir, if I remember right, your better half gave you
instructions about taking the Pietenpol squadron's roll call, you cannot
ignore a direct order from a superior. About time for some of the
overseas stationed flight units to ck in. Protecting freedom requires
constant vigilance, Sir.
Gordon
----- Original Message -----
From: Isablcorky@aol.com
To: pietenpol-list@matronics.com
Sent: Sunday, June 10, 2007 2:26 PM
Subject: Re: Pietenpol-List: Pietenpol Directory
Oscar,
I didn't know about Doc Mosher's Pietenpol Directory or I would never
had started this one. Oh well, maybe there are new folks like me that
like to see their name in lights. Hope we can finish what is started
Corky
-------------------------------------------------------------------------
-----
See what's free at AOL.com.
Message 28
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Pietenpol Directory |
Okay so now we have the makings of an active builders list. So why not cull the
information so we all have a full listing.
Through my job I travel rather frequently and enjoy meeting other builders to share
project info and pic. I typically post notice to find anyone interesting
in sharing while traveling. It would be nice to have a full contact listing of
active builders and owners.
John
Reserved NX985BP
Sent from my Verizon Wireless BlackBerry
-----Original Message-----
From: Isablcorky@aol.com
To:pietenpol-list@matronics.com
Subject: Re: Pietenpol-List: Pietenpol Directory
Oscar,
I didn't know about Doc Mosher's Pietenpol Directory or I would never had started
this one. Oh well, maybe there are new folks like me that like to see their
name in lights. Hope we can finish what is started
Corky
----------------
Message 29
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Don Lane
Arapahoe, NC
A-powered aircamper engine installed except for radiator and controls
and gauges
on the spreader type gear with fuselage, tail complete
3 piece wings partly through covering process
Message 30
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Pietenpol Directory |
Tom Bernie
4 Gerring Rd
Gloucester MA 01930
978-281-8892
GN-1 #3616AC (CAD plans - unsupported)
Started 2/06
Local Doug Fir
Wings and tail feathers covered (Stewart Systems)
Covering fuselage
Looking for C-90
Using a junk O-200 and J-3 mount to determine weight and balance then
jig and build a real mount (CAD plans have unusable weight and balance
info)
Planned on 1 1/2 year project -- looks like over 2 years.
Loved every minute!
Message 31
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Elevator cables |
I am in the same boat Oscar, unlike building a new dining room table I
always have the concern in the back of my head that if I do it wrong I may
die. So I measure everything a dozen times, review the archives on the
subject, agonize for a while and then finally make a cut. I have gotten a
lot better over this last year though. That's whats so good about going to
Broadhead and talking to the successful builders. You can get a good
perspective on what really needs to be perfect and what doesn't. After the
first one building a second Piet would be a piece of cake (still a time
consuming task, but with so much less research and agonizing).
Rick
> What's funny is that it is so easy to say all this stuff now that I have
> an
> airplane to fly. Back before I did, I'd worry and fret and fuss and think
> and sketch and build cardboard and string and popsicle stick parts (all of
> which are good things to do, mind you), but now when I read about somebody
> fretting about things like this when they could have already completed the
> part and gotten it covered, getting them that much closer to actually
> flying, I want to say the same thing everybody told me back then: "just
> hurry up and build it, because flying these airplanes is so much fun!"
>
>
--
Rick Holland
ObjectAge Ltd.
Castle Rock, Colorado
Message 32
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Wood Landing Gear Strut Fitting |
For those of you with the wood landing gear, do I weld around the two flat
pieces that form the attachment for the strut? See attached drawing. I
know I am supposed to weld where they come out of the flat plate.
Chris Tracy
Sacramento, Ca
Website at http://www.Westcoastpiet.com
Message 33
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Wood Landing Gear Strut Fitting |
Woops forgot the attachment
For those of you with the wood landing gear, do I weld around the two flat
pieces that form the attachment for the strut? See attached drawing. I
know I am supposed to weld where they come out of the flat plate.
Chris Tracy
Sacramento, Ca
Website at http://www.Westcoastpiet.com
Message 34
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Pietenpol Directory |
Hey Jim!, glad to see, umm hear, your still out there building.
Chris Tracy
Sacramento, Ca
Website at http://www.Westcoastpiet.com
Do not archive
----- Original Message -----
From: jimboyer@hughes.net
To: pietenpol-list@matronics.com
Sent: Sunday, June 10, 2007 4:39 PM
Subject: Re: Pietenpol-List: Pietenpol Directory
Jim Boyer number reserved now; 499JB
Santa Rosa, CA 95403
Pietenpol Aircamper, Corvair power (have engine ready to build once
crank is nitrided)
All wing ribs done, tail surfaces done, fuselage wood structure done,
control sticks assembly done
Working on steel aileron, stabilizer, rudder horns.
Cheers, Jim
Message 35
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Re Elevator cables |
When I was looking at the uncovered Piet at the original Pietenpol hanger at
Oshkosh I noticed that the upper elevator cables went through nylon
fairleads on the outside of the fuselage which raised the cables. I did the
same thing which raised the top cables enough to prevent touching the
elevator.
Rick
On 6/5/07, Graham and Robyn <grhewitt@globaldial.com> wrote:
>
> Any thoughts/advice on this would be appreciated.
>
> Does the tension vary between upper & lower cables at full deflection?
>
> If so can this be avoided.
>
> Any way of stopping the top cable from rubbing on the L,E of tail plane?
>
> Had considered raising the height of the bell crank in fuse but this could
> gear down the amount of travel avail for the elevtor.
>
>
> Thanks Graham
>
> fuse 75% tail surfaces 100% has taken 10 months
>
> *
>
>
> *
>
>
--
Rick Holland
ObjectAge Ltd.
Castle Rock, Colorado
Message 36
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Pietenpol Directory |
John,
Would be helpful if you would include your last name and location
CMC
************************************** See what's free at http://www.aol.com.
Message 37
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Pietenpol Directory |
Corky,
Add me to your builder list also. I posted a response earlier but
didnt' see it come up on the Piet-list.
Arden Adamson
N1450 Spencer Lake Ct.
Waupaca, WI 54981
715-258-4238
Building the long Piet with Jenny Gear, Corvair, three piece wing. Have
fuselage structure done, building second set of ribs (Riblett airfoil),
tail frames done, some parts of control system in place.
Enjoying the discussions on the Piet list.
________________________________
From: owner-pietenpol-list-server@matronics.com on behalf of
Isablcorky@aol.com
Sent: Sun 6/10/2007 9:53 PM
Subject: Re: Pietenpol-List: Pietenpol Directory
John,
Would be helpful if you would include your last name and location
CMC
________________________________
See what's free at AOL.com
<http://www.aol.com/?ncid=AOLAOF00020000000503> .
Message 38
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Wood Landing Gear Strut Fitting |
Yes, Chris, you weld all the way around the edge of the two flat pieces.
Greg Cardinal
Minneapolis
----- Original Message -----
From: "Catdesigns" <catdesigns@comcast.net>
Sent: Sunday, June 10, 2007 9:18 PM
Subject: Pietenpol-List: Wood Landing Gear Strut Fitting
> Woops forgot the attachment
>
> For those of you with the wood landing gear, do I weld around the two flat
> pieces that form the attachment for the strut? See attached drawing. I
> know I am supposed to weld where they come out of the flat plate.
>
>
> Chris Tracy
> Sacramento, Ca
> Website at http://www.Westcoastpiet.com
>
Message 39
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Pietenpol Directory |
Sheesh. Don't look at me email fer a day and look what happens....
Steve E here
A-65 powered three piece wing with 4' center section. Fuse is stretched
7 inches, didn't know about the long fuse at the time. Bungee gear,
Aluminum struts from a chair factory. Latex paint. Flying since
November 1997. M. Cuy Smoke system. Need to get it smokin again! (it
has been a while) 350 hours.
Sold piet caps to pay for my first trip to Brodhead. Big E on the
rudder cause I think it looks distinctive.
Last flight -yesterday TP bombing run, with my 9 year old son as
bombardier.
Just finished a restore of a 1947 Stinson -also with the trademark 'E'
Steve Eldredge
Spanish Fork UT
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of
Isablcorky@aol.com
Sent: Saturday, June 09, 2007 4:35 PM
Subject: Pietenpol-List: Pietenpol Directory
Isabelle frequently asks where some Pieter lives when I mention
something said or done on this list. I always have to say, " dang if I
know". So I'm starting with this e mail to create some sort of
directory. At least list your name, status of your aircraft, and city
and state. If you desire to disclose more info thats your business. At
least let it be known whether you're yank, reb, or californian type. If
this e mail has no more than one name during the next week I'll get the
message.
Claude M Corbett, "Corky" "Nathan" "Levi" Refurbishing a
complete Aeronca L-3 65TAC
625 Pierremont Rd Defender.
Shreveport, La 71106
2.
________________________________
See what's free at AOL.com
<http://www.aol.com?ncid=AOLAOF00020000000503> .
Message 40
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Wood Landing Gear Strut Fitting |
Thank Greg. Guess I need to practice that now.
Chris Tracy
Sacramento, Ca
Website at http://www.Westcoastpiet.com
----- Original Message -----
From: "gcardinal" <gcardinal@comcast.net>
Sent: Sunday, June 10, 2007 8:45 PM
Subject: Re: Pietenpol-List: Wood Landing Gear Strut Fitting
>
> Yes, Chris, you weld all the way around the edge of the two flat pieces.
>
> Greg Cardinal
> Minneapolis
>
> ----- Original Message -----
> From: "Catdesigns" <catdesigns@comcast.net>
> To: <pietenpol-list@matronics.com>
> Sent: Sunday, June 10, 2007 9:18 PM
> Subject: Pietenpol-List: Wood Landing Gear Strut Fitting
>
>
>> Woops forgot the attachment
>>
>> For those of you with the wood landing gear, do I weld around the two
>> flat
>> pieces that form the attachment for the strut? See attached drawing. I
>> know I am supposed to weld where they come out of the flat plate.
>>
>>
>> Chris Tracy
>> Sacramento, Ca
>> Website at http://www.Westcoastpiet.com
>>
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|