---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Sun 06/10/07: 40 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:38 AM - Re: Pietenpol Directory (pietflyr) 2. 03:56 AM - Re: Pietenpol-list: Pietenpol Directory (Wayne Poole) 3. 04:35 AM - Re: Pietenpol Directory (Jack T. Textor) 4. 05:28 AM - Re: Pietenpol Directory (Ed G.) 5. 05:44 AM - Re: Pietenpol Directory (gcardinal) 6. 06:29 AM - Re: Pietenpol Directory (Mike King) 7. 06:41 AM - Re: Pietenpol Directory (HVandervoo@aol.com) 8. 06:59 AM - Re: Pietenpol Directory (Cuy, Michael D. (GRC-RXD0)[ASRC]) 9. 07:00 AM - Re: Pietenpol Directory (skellytownflyer) 10. 08:08 AM - Re: Pietenpol Directory (Rcaprd@aol.com) 11. 08:26 AM - Re: Pietenpol Directory (Javier Cruz) 12. 08:44 AM - Re: Pietenpol Directory (Amsafetyc@aol.com) 13. 09:16 AM - Re: Pietenpol Directory (TGSTONE236@aol.com) 14. 09:41 AM - Re: Pietenpol Directory (Rick Holland) 15. 10:42 AM - Re: Pietenpol Directory (Gordon Bowen) 16. 11:16 AM - Re: Pietenpol Directory (Alan Lyscars) 17. 11:31 AM - pietenpol directory (RBush96589@aol.com) 18. 12:36 PM - Re: Pietenpol Directory (Tom Stinemetze) 19. 12:44 PM - Re: Pietenpol Directory (Bill Church) 20. 02:31 PM - Re: Pietenpol Directory (Ryan Michalkiewicz) 21. 02:45 PM - WOW! Corky, Pietenpol Directory (walt evans) 22. 03:17 PM - Pietenpol Directory (Oscar Zuniga) 23. 03:26 PM - Re: Pietenpol Directory (Gene Rambo) 24. 03:33 PM - Re: Pietenpol Directory (Isablcorky@aol.com) 25. 04:14 PM - Re: Pietenpol Directory (Ed G.) 26. 04:40 PM - Re: Pietenpol Directory (jimboyer@hughes.net) 27. 05:30 PM - Re: Pietenpol Directory (Gordon Bowen) 28. 05:55 PM - Re: Pietenpol Directory (Amsafetyc@aol.com) 29. 06:04 PM - piet directory (Donald Lane) 30. 06:28 PM - Re: Pietenpol Directory (Tom Bernie) 31. 07:10 PM - Re: Elevator cables (Rick Holland) 32. 07:16 PM - Wood Landing Gear Strut Fitting (Catdesigns) 33. 07:17 PM - Wood Landing Gear Strut Fitting (Catdesigns) 34. 07:22 PM - Re: Pietenpol Directory (Catdesigns) 35. 07:37 PM - Re: Re Elevator cables (Rick Holland) 36. 07:54 PM - Re: Pietenpol Directory (Isablcorky@aol.com) 37. 08:29 PM - Re: Pietenpol Directory (Arden Adamson) 38. 08:45 PM - Re: Wood Landing Gear Strut Fitting (gcardinal) 39. 08:50 PM - Re: Pietenpol Directory (Steve Eldredge) 40. 09:17 PM - Re: Wood Landing Gear Strut Fitting (Catdesigns) ________________________________ Message 1 _____________________________________ Time: 03:38:28 AM PST US From: "pietflyr" Subject: RE: Pietenpol-List: Pietenpol Directory NS4gIEphY2sgUGhpbGxpcHMgICAgICAgICAgICAgICAgICAgIFBpZXRlbnBvbCBBaXIgQ2FtcGVy IGJ1aWx0IGFuZCBGbHlpbmcNCjk5MTYgQm9uc2FsIENyb3NzaW5nICAgICAgICAgICAgUlYtNCAN Ck5ldyBIaWxsLCBOQyAyNzU2MiAgICAgICAgICAgICAgICBSVi0xMCBjdXJyZW50bHkgdW5kZXIg Y29uc3RydWN0aW9uDQogIC0tLS0tT3JpZ2luYWwgTWVzc2FnZS0tLS0tDQogIEZyb206IG93bmVy LXBpZXRlbnBvbC1saXN0LXNlcnZlckBtYXRyb25pY3MuY29tIFttYWlsdG86b3duZXItcGlldGVu cG9sLWxpc3Qtc2VydmVyQG1hdHJvbmljcy5jb21dT24gQmVoYWxmIE9mIHdhbHQgZXZhbnMNCiAg U2VudDogU2F0dXJkYXksIEp1bmUgMDksIDIwMDcgODoxMiBQTQ0KICBUbzogcGlldGVucG9sLWxp c3RAbWF0cm9uaWNzLmNvbQ0KICBTdWJqZWN0OiBSZTogUGlldGVucG9sLUxpc3Q6IFBpZXRlbnBv bCBEaXJlY3RvcnkNCg0KDQoNCiAgV2FsdCBFdmFucw0KICBOWDE0MERMDQogICJObyBvbmUgZXZl ciBsZWFybmVkIGFueXRoaW5nIGJ5IHRhbGtpbmciDQogICAgLS0tLS0gT3JpZ2luYWwgTWVzc2Fn ZSAtLS0tLSANCiAgICBGcm9tOiBoYXJ2ZXkucnVsZUBiZWxsLmNhIA0KICAgIFRvOiBwaWV0ZW5w b2wtbGlzdEBtYXRyb25pY3MuY29tIA0KICAgIFNlbnQ6IFNhdHVyZGF5LCBKdW5lIDA5LCAyMDA3 IDc6MzMgUE0NCiAgICBTdWJqZWN0OiBSRTogUGlldGVucG9sLUxpc3Q6IFBpZXRlbnBvbCBEaXJl Y3RvcnkNCg0KDQogICAgSGFydmV5IFJ1bGUgbG9jYXRlZCBpbiBPdHRhd2EgLE9udGFyaW8sQ2Fu YWRhKHVsdHJhIHlhbmspR3JlZ2EvUGlldGVucG9sOzgwIGhwIEZyYW5rbGluOzIgaHJzIG9uIHBs YW5lIHNvIGZhcihob3BlIHRvIHB1dCBtb3JlIG9uIHNvb24pLlBsYW5lIHVwIGZvciBzYWxlIHJp Z2h0IG5vdyBmb3IgMjA1MDAgY25kKGZsZXhpYmxlKSANCg0KICAgICANCg0KDQotLS0tLS0tLS0t LS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0t LS0tLS0tLS0tDQoNCiAgICBGcm9tOiBvd25lci1waWV0ZW5wb2wtbGlzdC1zZXJ2ZXJAbWF0cm9u aWNzLmNvbSBbbWFpbHRvOm93bmVyLXBpZXRlbnBvbC1saXN0LXNlcnZlckBtYXRyb25pY3MuY29t XSBPbiBCZWhhbGYgT2YgUm9tYW4gQnVrb2x0DQogICAgU2VudDogSnVuZSA5LCAyMDA3IDc6MjUg UE0NCiAgICBUbzogcGlldGVucG9sLWxpc3RAbWF0cm9uaWNzLmNvbQ0KICAgIFN1YmplY3Q6IFJl OiBQaWV0ZW5wb2wtTGlzdDogUGlldGVucG9sIERpcmVjdG9yeQ0KDQogICAgIA0KDQogICAgMi4g Um9tYW4gQnVrb2x0ICAgICAgICAgICAgICAgICAgICAgIFBpZXRlbnBvbCBhaXIgQ2FtcGVyIHBh cnRpYWxseSBidWlsdCBpbiBteSBiYXNlbWVudC4NCg0KICAgICAgICA2NTA1IFVyaWNoIFRlcnJh Y2UgICAgICAgICAgICAgICBGdXNlIGFib3V0IDgwJSBkb25lLiAgQWxzbyByZWJ1aWxkaW5nIGEg Q29ydmFpciBtb3RvciAgDQoNCiAgICBNYWRpc29uLCB3aS4gNTM3MTkgICAgICAgICAgICAgICAg ICBNZWFud2hpbGUgSSBib3VnaHQgYW5kIGFtIGZseWluZyBhIDE5OTAgUGlldGVucG9sIE5YMjA3 OTUNCg0KICAgIGNvbmNlcHRtb2RlbHNAdGRzLm5ldCAgICAgICAgICAgbWVudGlvbmVkIGluIENo ZXQgUGVla3MgYm9vaywgYnVpbHQgYnkgUmF5IEhpbGwgYW5kIHdpZmUuDQoNCiAgICAgIC0tLS0t IE9yaWdpbmFsIE1lc3NhZ2UgLS0tLS0gDQoNCiAgICAgIEZyb206IElzYWJsY29ya3lAYW9sLmNv bSANCg0KICAgICAgVG86IHBpZXRlbnBvbC1saXN0QG1hdHJvbmljcy5jb20gDQoNCiAgICAgIFNl bnQ6IFNhdHVyZGF5LCBKdW5lIDA5LCAyMDA3IDU6MzQgUE0NCg0KICAgICAgU3ViamVjdDogUGll dGVucG9sLUxpc3Q6IFBpZXRlbnBvbCBEaXJlY3RvcnkNCg0KICAgICAgIA0KDQogICAgICBJc2Fi ZWxsZSBmcmVxdWVudGx5IGFza3Mgd2hlcmUgc29tZSBQaWV0ZXIgbGl2ZXMgd2hlbiBJIG1lbnRp b24gc29tZXRoaW5nIHNhaWQgb3IgZG9uZSBvbiB0aGlzIGxpc3QuIEkgYWx3YXlzIGhhdmUgdG8g c2F5LCAiIGRhbmcgaWYgSSBrbm93Ii4gU28gSSdtIHN0YXJ0aW5nIHdpdGggdGhpcyBlIG1haWwg dG8gY3JlYXRlIHNvbWUgc29ydCBvZiBkaXJlY3RvcnkuIEF0IGxlYXN0IGxpc3QgeW91ciBuYW1l LCBzdGF0dXMgb2YgeW91ciBhaXJjcmFmdCwgYW5kIGNpdHkgYW5kIHN0YXRlLiBJZiB5b3UgZGVz aXJlIHRvIGRpc2Nsb3NlIG1vcmUgaW5mbyB0aGF0cyB5b3VyIGJ1c2luZXNzLiBBdCBsZWFzdCBs ZXQgaXQgYmUga25vd24gd2hldGhlciB5b3UncmUgeWFuaywgcmViLCBvciBjYWxpZm9ybmlhbiB0 eXBlLiBJZiB0aGlzIGUgbWFpbCBoYXMgbm8gbW9yZSB0aGFuIG9uZSBuYW1lIGR1cmluZyB0aGUg bmV4dCB3ZWVrIEknbGwgZ2V0IHRoZSBtZXNzYWdlLg0KDQogICAgICAgDQoNCiAgICAgIDEuIENs YXVkZSBNIENvcmJldHQsICAgIkNvcmt5IiAgIk5hdGhhbiIgICJMZXZpIiAgICAgICAgUmVmdXJi aXNoaW5nIGEgY29tcGxldGUgQWVyb25jYSBMLTMgNjVUQUMgICAgICAgICAgICAgIA0KDQogICAg ICA2MjUgUGllcnJlbW9udCBSZCAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAg ICAgICAgICBEZWZlbmRlci4gICAgICAgICAgICAgICAgICAgIA0KDQogICAgICBTaHJldmVwb3J0 LCBMYSA3MTEwNiAgDQoNCiAgICAgICANCg0KICAgICAgMi4gIFJvbWFuIEJ1a29sdCAgICAgICAg ICAgICAgICAgICAgICBQaWV0ZW5wb2wgYWlyIENhbXBlciBwYXJ0aWFsbHkgYnVpbHQgaW4gbXkg YmFzZW1lbnQuDQoNCiAgICAgICAgICA2NTA1IFVyaWNoIFRlcnJhY2UgICAgICAgICAgICAgICBG dXNlIGFib3V0IDgwJSBkb25lLiAgQWxzbyByZWJ1aWxkaW5nIGEgQ29ydmFpciBtb3RvciAgDQoN CiAgICAgIE1hZGlzb24sIHdpLiA1MzcxOSAgICAgICAgICAgICAgICAgIE1lYW53aGlsZSBJIGJv dWdodCBhbmQgYW0gZmx5aW5nIGEgMTk5MCBQaWV0ZW5wb2wgTlgyMDc5NQ0KDQogICAgICBjb25j ZXB0bW9kZWxzQHRkcy5uZXQgICAgICAgICAgIG1lbnRpb25lZCBpbiBDaGV0IFBlZWtzIGJvb2ss IGJ1aWx0IGJ5IFJheSBIaWxsIGFuZCB3aWZlLg0KDQoNCg0KICAgICAgMy4gSGFydmV5IFJ1bGUg bG9jYXRlZCBpbiBPdHRhd2EgLE9udGFyaW8sQ2FuYWRhKHVsdHJhIHlhbmspR3JlZ2EvUGlldGVu cG9sOzgwIGhwIEZyYW5rbGluOzIgaHJzIG9uIHBsYW5lIHNvIGZhcihob3BlIHRvIHB1dCBtb3Jl IG9uIHNvb24pLlBsYW5lIHVwIGZvciBzYWxlIHJpZ2h0IG5vdyBmb3IgMjA1MDAgY25kKGZsZXhp YmxlKSANCg0KICAgICAgICAgICAgICAgICAgICAgDQoNCiAgICAgIDQuV2FsdCBFdmFucyAgICAg ICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgICAgRmlzaGVyICBG RlAgNDA0IGZyb20ga2l0DQogICAgICAgICAgMyB3b3RhZ2EgcGFzcyAgICAgICAgICAgICAgICAg ICAgICAgICAgICAgICAgICAgICAgICAgICAgMTkyOSBQaWV0ZW5wb2wgQWlyQ2FtcGVyIGZyb20g cGxhbnMNCiAgICAgICAgICBBbmRvdmVyLCBuaiAwNzgyMSAgICAgICAgICAgICAgICAgICAgICAg ICAgICAgICAgICAgICAgIGxpY2Vuc2VkIGluIDIwMDIsIGFuZCBmbHlpbmcgbm93DQoNCg0KLS0t LS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0t LS0tLS0tLS0tLS0tLS0NCg0KICAgICAgU2VlIHdoYXQncyBmcmVlIGF0IEFPTC5jb20uIA0KDQog IGhyZWY9Imh0dHA6Ly93d3cubWF0cm9uaWNzLmNvbS9OYXZpZ2F0b3I/UGlldGVucG9sLUxpc3Qi Pmh0dHA6Ly93d3cubWF0cm9uaWNzLmNvbS9OYXZpZ2F0b3I/UGlldGVucG9sLUxpc3RocmVmPSJo dHRwOi8vZm9ydW1zLm1hdHJvbmljcy5jb20iPmh0dHA6Ly9mb3J1bXMubWF0cm9uaWNzLmNvbSAg ICANCg0KaHJlZj0iaHR0cDovL3d3dy5tYXRyb25pY3MuY29tL05hdmlnYXRvcj9QaWV0ZW5wb2wt TGlzdCI+aHR0cDovL3d3dy5tYXRyb25pY3MuY29tL05hdmlnYXRvcj9QaWV0ZW5wb2wtTGlzdA0K aHJlZj0iaHR0cDovL2ZvcnVtcy5tYXRyb25pY3MuY29tIj5odHRwOi8vZm9ydW1zLm1hdHJvbmlj cy5jb20NCg0KDQoNCl8tPT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09 PT09PT09PT09PT09PT09PT09DQpfLT0gICAgICAgICAgLSBUaGUgUGlldGVucG9sLUxpc3QgRW1h aWwgRm9ydW0gLQ0KXy09IFVzZSB0aGUgTWF0cm9uaWNzIExpc3QgRmVhdHVyZXMgTmF2aWdhdG9y IHRvIGJyb3dzZQ0KXy09IHRoZSBtYW55IExpc3QgdXRpbGl0aWVzIHN1Y2ggYXMgdGhlIFN1YnNj cmlwdGlvbnMgcGFnZSwNCl8tPSBBcmNoaXZlIFNlYXJjaCAmIERvd25sb2FkLCA3LURheSBCcm93 c2UsIENoYXQsIEZBUSwNCl8tPSBQaG90b3NoYXJlLCBhbmQgbXVjaCBtdWNoIG1vcmU6DQpfLT0g ICAtLT4gaHR0cDovL3d3dy5tYXRyb25pY3MuY29tL05hdmlnYXRvcj9QaWV0ZW5wb2wtTGlzdA0K Xy09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09 PT09PT0NCl8tPSAgICAgICAgICAgICAgLSBORVcgTUFUUk9OSUNTIFdFQiBGT1JVTVMgLQ0KXy09 IFNhbWUgZ3JlYXQgY29udGVudCBub3cgYWxzbyBhdmFpbGFibGUgdmlhIHRoZSBXZWIgRm9ydW1z IQ0KXy09ICAgLS0+IGh0dHA6Ly9mb3J1bXMubWF0cm9uaWNzLmNvbQ0KXy09PT09PT09PT09PT09 PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT0NCg0K ________________________________ Message 2 _____________________________________ Time: 03:56:12 AM PST US From: "Wayne Poole" Subject: Pietenpol-List: Re: Pietenpol-list: Pietenpol Directory My address is 8465 Harold Drive in Denham Springs, Louisiana 70726. I have a GN-1 95%complete with a Continental 0-200 and a Sensenich 72 x 44 prop. It has a wooden fuselage and three piece wing. Wayne Poole dxechkn@earthlink.net EarthLink Revolves Around You. ________________________________ Message 3 _____________________________________ Time: 04:35:42 AM PST US Subject: RE: Pietenpol-List: Pietenpol Directory From: "Jack T. Textor" Jack Textor 29 SW 58th Drive Des Moines, IA 50312 515-225-7000 wk 515-277-4173 hm www.textors.com Piet tail, ribs and spars done, fuselage 75% Thanks Corky ________________________________ Message 4 _____________________________________ Time: 05:28:40 AM PST US From: "Ed G." Subject: Re: Pietenpol-List: Pietenpol Directory Ed Grentzer...3714 Desoto Blvd. Palm Harbor, Florida 34683...727-942-4213.... Pietenpol A/C, complete except for right wing, struts, covering and paint. 80 hp Franklin 4AC176FE with 72x42 Tennessee prop mounted and almost ready to run. ----- Original Message ----- From: Jack T. Textor To: pietenpol-list@matronics.com Sent: Sunday, June 10, 2007 7:29 AM Subject: RE: Pietenpol-List: Pietenpol Directory Jack Textor 29 SW 58th Drive Des Moines, IA 50312 515-225-7000 wk 515-277-4173 hm www.textors.com Piet tail, ribs and spars done, fuselage 75% Thanks Corky http://www.matronics.com/Navigator?Pietenpol-List ________________________________ Message 5 _____________________________________ Time: 05:44:17 AM PST US From: "gcardinal" Subject: Re: Pietenpol-List: Pietenpol Directory Dale Johnson / Greg Cardinal Minneapolis, Minnesota Air Camper NX18235 (one of Bernard's original n-numbers) Long fuselage A-65 Brakeless "Jenny" style landing gear Climbs about 300 fpm Cruises 75 - 80 mph ----- Original Message ----- From: Isablcorky@aol.com To: pietenpol-list@matronics.com Sent: Saturday, June 09, 2007 5:34 PM Subject: Pietenpol-List: Pietenpol Directory Isabelle frequently asks where some Pieter lives when I mention something said or done on this list. I always have to say, " dang if I know". So I'm starting with this e mail to create some sort of directory. At least list your name, status of your aircraft, and city and state. If you desire to disclose more info thats your business. At least let it be known whether you're yank, reb, or californian type. If this e mail has no more than one name during the next week I'll get the message. Claude M Corbett, "Corky" "Nathan" "Levi" Refurbishing a complete Aeronca L-3 65TAC 625 Pierremont Rd Defender. Shreveport, La 71106 2. ------------------------------------------------------------------------- ----- See what's free at AOL.com. ________________________________ Message 6 _____________________________________ Time: 06:29:07 AM PST US From: "Mike King" Subject: Re: Pietenpol-List: Pietenpol Directory Mike King P.O. Box 598 Ponder, Texas 76259 (may be moving to Corpus Christi soon) 214.905.9299 GN-1 77MK Continental A-80 McCauley metal 69x39 prop Flying since built in 1985 Dual controls and instruments ELT, radio antenna, hydraulic brakes (rear only) Three section wing with rear cutout ----- Original Message ----- From: Roman Bukolt To: pietenpol-list@matronics.com Sent: Saturday, June 09, 2007 6:25 PM Subject: Re: Pietenpol-List: Pietenpol Directory 2. Roman Bukolt Pietenpol air Camper partially built in my basement. 6505 Urich Terrace Fuse about 80% done. Also rebuilding a Corvair motor Madison, wi. 53719 Meanwhile I bought and am flying a 1990 Pietenpol NX20795 conceptmodels@tds.net mentioned in Chet Peeks book, built by Ray Hill and wife. ----- Original Message ----- From: Isablcorky@aol.com To: pietenpol-list@matronics.com Sent: Saturday, June 09, 2007 5:34 PM Subject: Pietenpol-List: Pietenpol Directory Isabelle frequently asks where some Pieter lives when I mention something said or done on this list. I always have to say, " dang if I know". So I'm starting with this e mail to create some sort of directory. At least list your name, status of your aircraft, and city and state. If you desire to disclose more info thats your business. At least let it be known whether you're yank, reb, or californian type. If this e mail has no more than one name during the next week I'll get the message. Claude M Corbett, "Corky" "Nathan" "Levi" Refurbishing a complete Aeronca L-3 65TAC 625 Pierremont Rd Defender. Shreveport, La 71106 2. ------------------------------------------------------------------------- --- See what's free at AOL.com. href="http://www.matronics.com/Navigator?Pietenpol-List">http://www.mat ronics.com/Navigator?Pietenpol-List href="http://forums.matronics.com">http://forums.matronics.com ________________________________ Message 7 _____________________________________ Time: 06:41:47 AM PST US From: HVandervoo@aol.com Subject: Re: Pietenpol-List: Pietenpol Directory Hans vander Voort 32226 windrose lane Waller, Texas Flying Pietenpol Aircamper with Corvair engine. _http://www.frappr.com/pietenpol_ (http://www.frappr.com/pietenpol) ************************************** See what's free at http://www.aol.com. ________________________________ Message 8 _____________________________________ Time: 06:59:50 AM PST US Subject: RE: Pietenpol-List: Pietenpol Directory From: "Cuy, Michael D. (GRC-RXD0)[ASRC]" Michael Cuy (The Yankee Boy named by Corky) 298 Runn Street Berea, OH 44017 Short Fuselage (1933) A-65 Pietenpol Air Camper 3 piece wing Nose fuel tank, 17 gallons Center section wing baggage area Empty Weight: 632 lbs. Flying since June, 1998 400 TT give or take Last flight: yesterday. ________________________________ Message 9 _____________________________________ Time: 07:00:57 AM PST US Subject: Pietenpol-List: Re: Pietenpol Directory From: "skellytownflyer" Raymond Hanover-Skellytown Texas. (in the panhande)-GN-1 with Corvair power. ( D.J. Vegh's project) wings almost ready for fabric-just finished installing aluminum leadng edge. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=117602#117602 ________________________________ Message 10 ____________________________________ Time: 08:08:00 AM PST US From: Rcaprd@aol.com Subject: Re: Pietenpol-List: Pietenpol Directory Chuck Gantzer 626 Pattie Wichita, KS 67211 Pietenpol AirCamper NX770CG _http://nx770cg.com/_ (http://nx770cg.com/) Just over 300 hrs TT Short Fuselage, Split Axle Gear, Turf Tires Continental A65, Homebuilt 72 X 42 Prop I love flying this plane !! ************************************** See what's free at http://www.aol.com. ________________________________ Message 11 ____________________________________ Time: 08:26:12 AM PST US From: Javier Cruz Subject: Re: Pietenpol-List: Pietenpol Directory Hi friends The last week i finished my pilot chief work on the PGR in Mexico, just work now like a G-II pilot, so i think that finally i have enought time for complete my project. Corky, good to know that you are still active on this list.\ Javier Cruz "JAVCR" Valle de casas 202, Valle de Aragon, Mexico, Mexico Fuselage, wings, tail group complete, just needs epoxic varnish for cover. Corvair engine with 16:00 hours on test stand and now on the plane. (i need to remove it for complete the firewall fiberfrax install) Good luck on your list Corky ________________________________ Message 12 ____________________________________ Time: 08:44:27 AM PST US Subject: Re: Pietenpol-List: Pietenpol Directory From: Amsafetyc@aol.com Corkey John Recine here in Lititz Pennsylvania Home of the PA. Dutch Piet long fuse. Fuse under const Worked Katrina recovery Plaq and Orleans parrish Regards John NX985BP Sent from my Verizon Wireless BlackBerry -----Original Message----- From: Isablcorky@aol.com To:pietenpol-list@matronics.com Subject: Pietenpol-List: Pietenpol Directory Isabelle frequently asks where some Pieter lives when I mention something said or done on this list. I always have to say, " dang if I know". So I'm starting with this e mail to create some sort of directory. At least list your name, status of your aircraft, and city and state. If you desire to disclose more info thats your business. At least let it be known whether you're yank, reb, or californian type. If this e mail has no more than one name during the next week I'll get the message. Claude M Corbett, "Corky" "Nathan" "Levi" Refurbishing a complete Aeronca L-3 65TAC 625 Pierremont Rd Defender. Shreveport, La 71106 2. ---------------- ________________________________ Message 13 ____________________________________ Time: 09:16:25 AM PST US From: TGSTONE236@aol.com Subject: Re: Pietenpol-List: Pietenpol Directory Ted Stone Wilmington NC Piet short fuselage on gear tail feathers completed 64 Corvair engine with prop hub installed came with project I took over. I have to open engine to see what has been done.have stromberg carb,and large oil cooler. distributer hasn't been upgraded spruce spars cut and routed with ribs installed on one and ribs just slid on other wing. nothing done on center section yet. maybe 25 to 35% completed ************************************** See what's free at http://www.aol.com. ________________________________ Message 14 ____________________________________ Time: 09:41:14 AM PST US From: "Rick Holland" Subject: Re: Pietenpol-List: Pietenpol Directory Rick Holland 3732 Castle Butte Dr Castle Rock, CO 80109 Long fuselage Piet Cub (GN1) style gear Corvair engine half built Wings and tail ready for cover Fuse 90% ________________________________ Message 15 ____________________________________ Time: 10:42:08 AM PST US From: "Gordon Bowen" Subject: Re: Pietenpol-List: Pietenpol Directory Commander Corky, Sir, I am proud to report, N-1033B is in A-1 flying condition in hanger Palatka FL, guarding FL's sunny St. Augustine area. The good ship has a steel fuse, aeronca wings, cessna wheels and brakes, 0-235 engine (Sir, can I still call it a Piete?, think Bernard would be proud?), no smoke, but can install beer can holder on gunnel to hold water ballons if so ordered. Reporting in: Gordon Bowen P.O. Box 2201 (so far out the end of the road, ain't got RFD service.) Homely ole Homer AK (as far as you can git northwest without a russkie passport) Gordon ----- Original Message ----- From: Isablcorky@aol.com To: pietenpol-list@matronics.com Sent: Saturday, June 09, 2007 2:34 PM Subject: Pietenpol-List: Pietenpol Directory Isabelle frequently asks where some Pieter lives when I mention something said or done on this list. I always have to say, " dang if I know". So I'm starting with this e mail to create some sort of directory. At least list your name, status of your aircraft, and city and state. If you desire to disclose more info thats your business. At least let it be known whether you're yank, reb, or californian type. If this e mail has no more than one name during the next week I'll get the message. Claude M Corbett, "Corky" "Nathan" "Levi" Refurbishing a complete Aeronca L-3 65TAC 625 Pierremont Rd Defender. Shreveport, La 71106 2. ------------------------------------------------------------------------- ----- See what's free at AOL.com. ________________________________ Message 16 ____________________________________ Time: 11:16:04 AM PST US From: "Alan Lyscars" Subject: Re: Pietenpol-List: Pietenpol Directory Al Lyscars Portland, Maine Just started GN-1 from scratch. 12 fittings and three ribs completed. Corvair core aquired. Union boy. Greetings, Corky! ________________________________ Message 17 ____________________________________ Time: 11:31:41 AM PST US From: RBush96589@aol.com Subject: Pietenpol-List: pietenpol directory Robert ( Randy ) Bush 2945 Law RD Lexington TN 38351 Corvair powered pietenpol ready for paint ************************************** See what's free at http://www.aol.com. ________________________________ Message 18 ____________________________________ Time: 12:36:56 PM PST US From: "Tom Stinemetze" Subject: Re: Pietenpol-List: Pietenpol Directory Tom Stinemetze, McPherson, Kansas. Pietenpol Air Camper - 3 years into an estimated 5-year project. Ribs completed with spars just a'waitin. Fuselage & empennage about 90% done. Ready to install control cables as sticks and elevator (flipper) bellcrank are in place. Corvair engine torn down and cleaned up. ____ | ____ \8/ / \ ________________________________ Message 19 ____________________________________ Time: 12:44:48 PM PST US Subject: RE: Pietenpol-List: Pietenpol Directory From: "Bill Church" Bill Church Richmond Hill, Ontario, Canada (Canuck) Building long fuse Air Camper Ribs built as of June 2007. (Project stalled for past year, but about to get going again - garage workshop is almost ready) ________________________________ Message 20 ____________________________________ Time: 02:31:21 PM PST US From: Ryan Michalkiewicz Subject: Re: Pietenpol-List: Pietenpol Directory Ryan, Brystal and Contessa Lake Wales, Florida Building streched, Widend Pietenpol Wood ordered, have core Corvair pietn38b@aol.com wrote: Sorry, hit the send button to soon Jim Ballew Collinsville, Oklahoma Completed a Corvair powered Piet in 1995 69" warp drive prop Also have a Corvair powered Davis DA-2A completed in 1987 --------------------------------- See what's free at AOL.com. --------------------------------- Fussy? Opinionated? Impossible to please? Perfect. Join Yahoo!'s user panel and lay it on us. ________________________________ Message 21 ____________________________________ Time: 02:45:49 PM PST US From: "walt evans" Subject: Pietenpol-List: WOW! Corky, Pietenpol Directory Corky, Sure hit a good nerve with this. Haven't seen this much activity for awhile Good call!! Walt Evans NX140DL "No one ever learned anything by talking" ________________________________ Message 22 ____________________________________ Time: 03:17:25 PM PST US From: "Oscar Zuniga" Subject: Pietenpol-List: Pietenpol Directory Well, I've got to say that probably 3/4 of the people on this list either own Piets, GN-1s, or at least have a registration number for their project. That being the case, most of the folks on this list already appear in Doc Mosher's nifty little Piet directory and it's a great resource if you're looking for someone. However, I'll give my contact info here for ya, Corky (as if you didn't already have it ;o) PS- yesterday I found the secret to perfect landings in 41CC: land it on grass! You never even know the tires arrive on the grass. I love it! Oscar Zuniga 8614 Waldon Heights San Antonio, TX 78254 happily flying Corky's pride and joy, Pietenpol Aircamper NX41CC with A65-8 power! mailto: taildrags@hotmail.com website at http://www.flysquirrel.net/piets/CorkyPiet.html _________________________________________________________________ Dont miss your chance to WIN $10,000 and other great prizes from Microsoft ________________________________ Message 23 ____________________________________ Time: 03:26:53 PM PST US From: "Gene Rambo" Subject: Re: Pietenpol-List: Pietenpol Directory Gene & Karen Rambo (&Will) Pietenpol Air Camper, fuselage nearly finished, 305 Riley Street straight axle landing gear giving fits, Falls Church, VA 22046 model A Ford, waiting on radiator (hint, hint) 703-536-0909 Flying Travel Air 2000, Staggerwing project, CRJ for hire generambo@msn.com ----- Original Message ----- From: Roman Bukolt To: pietenpol-list@matronics.com Sent: Saturday, June 09, 2007 7:25 PM Subject: Re: Pietenpol-List: Pietenpol Directory 2. Roman Bukolt Pietenpol air Camper partially built in my basement. 6505 Urich Terrace Fuse about 80% done. Also rebuilding a Corvair motor Madison, wi. 53719 Meanwhile I bought and am flying a 1990 Pietenpol NX20795 conceptmodels@tds.net mentioned in Chet Peeks book, built by Ray Hill and wife. ----- Original Message ----- From: Isablcorky@aol.com To: pietenpol-list@matronics.com Sent: Saturday, June 09, 2007 5:34 PM Subject: Pietenpol-List: Pietenpol Directory Isabelle frequently asks where some Pieter lives when I mention something said or done on this list. I always have to say, " dang if I know". So I'm starting with this e mail to create some sort of directory. At least list your name, status of your aircraft, and city and state. If you desire to disclose more info thats your business. At least let it be known whether you're yank, reb, or californian type. If this e mail has no more than one name during the next week I'll get the message. Claude M Corbett, "Corky" "Nathan" "Levi" Refurbishing a complete Aeronca L-3 65TAC 625 Pierremont Rd Defender. Shreveport, La 71106 2. ------------------------------------------------------------------------- --- See what's free at AOL.com. href="http://www.matronics.com/Navigator?Pietenpol-List">http://www.mat ronics.com/Navigator?Pietenpol-List href="http://forums.matronics.com">http://forums.matronics.com http://www.matronics.com/Navigator?Pietenpol-List ________________________________ Message 24 ____________________________________ Time: 03:33:43 PM PST US From: Isablcorky@aol.com Subject: Re: Pietenpol-List: Pietenpol Directory Oscar, I didn't know about Doc Mosher's Pietenpol Directory or I would never had started this one. Oh well, maybe there are new folks like me that like to see their name in lights. Hope we can finish what is started Corky ************************************** See what's free at http://www.aol.com. ________________________________ Message 25 ____________________________________ Time: 04:14:18 PM PST US From: "Ed G." Subject: Re: Pietenpol-List: Pietenpol Directory Correct me if I'm wrong but I think Doc Mosher's excellent directory only includes finished/flying Piets. It would be nice to have a similar directory that includes builders. And....Please add that my Piet is a 1933 version, short fuse with split gear. Ed Grentzer ----- Original Message ----- From: Isablcorky@aol.com To: pietenpol-list@matronics.com Sent: Sunday, June 10, 2007 6:26 PM Subject: Re: Pietenpol-List: Pietenpol Directory Oscar, I didn't know about Doc Mosher's Pietenpol Directory or I would never had started this one. Oh well, maybe there are new folks like me that like to see their name in lights. Hope we can finish what is started Corky ------------------------------------------------------------------------- ----- See what's free at AOL.com. http://www.matronics.com/Navigator?Pietenpol-List ________________________________ Message 26 ____________________________________ Time: 04:40:09 PM PST US From: "jimboyer@hughes.net" Subject: Re: Pietenpol-List: Pietenpol Directory Jim Boyer number reserved now; 499JB Santa Rosa, CA 95403 Pietenpol Aircamper, Corvair power (have engine ready to build once crank is nitrided) All wing ribs done, tail surfaces done, fuselage wood structure done, control sticks assembly done Working on steel aileron, stabilizer, rudder horns. Cheers, Jim ________________________________ Message 27 ____________________________________ Time: 05:30:00 PM PST US From: "Gordon Bowen" Subject: Re: Pietenpol-List: Pietenpol Directory Commander Corky, Actually, Sir, if I remember right, your better half gave you instructions about taking the Pietenpol squadron's roll call, you cannot ignore a direct order from a superior. About time for some of the overseas stationed flight units to ck in. Protecting freedom requires constant vigilance, Sir. Gordon ----- Original Message ----- From: Isablcorky@aol.com To: pietenpol-list@matronics.com Sent: Sunday, June 10, 2007 2:26 PM Subject: Re: Pietenpol-List: Pietenpol Directory Oscar, I didn't know about Doc Mosher's Pietenpol Directory or I would never had started this one. Oh well, maybe there are new folks like me that like to see their name in lights. Hope we can finish what is started Corky ------------------------------------------------------------------------- ----- See what's free at AOL.com. ________________________________ Message 28 ____________________________________ Time: 05:55:03 PM PST US Subject: Re: Pietenpol-List: Pietenpol Directory From: Amsafetyc@aol.com Okay so now we have the makings of an active builders list. So why not cull the information so we all have a full listing. Through my job I travel rather frequently and enjoy meeting other builders to share project info and pic. I typically post notice to find anyone interesting in sharing while traveling. It would be nice to have a full contact listing of active builders and owners. John Reserved NX985BP Sent from my Verizon Wireless BlackBerry -----Original Message----- From: Isablcorky@aol.com To:pietenpol-list@matronics.com Subject: Re: Pietenpol-List: Pietenpol Directory Oscar, I didn't know about Doc Mosher's Pietenpol Directory or I would never had started this one. Oh well, maybe there are new folks like me that like to see their name in lights. Hope we can finish what is started Corky ---------------- ________________________________ Message 29 ____________________________________ Time: 06:04:59 PM PST US From: "Donald Lane" Subject: Pietenpol-List: piet directory Don Lane Arapahoe, NC A-powered aircamper engine installed except for radiator and controls and gauges on the spreader type gear with fuselage, tail complete 3 piece wings partly through covering process ________________________________ Message 30 ____________________________________ Time: 06:28:24 PM PST US Subject: Re: Pietenpol-List: Pietenpol Directory From: Tom Bernie Tom Bernie 4 Gerring Rd Gloucester MA 01930 978-281-8892 GN-1 #3616AC (CAD plans - unsupported) Started 2/06 Local Doug Fir Wings and tail feathers covered (Stewart Systems) Covering fuselage Looking for C-90 Using a junk O-200 and J-3 mount to determine weight and balance then jig and build a real mount (CAD plans have unusable weight and balance info) Planned on 1 1/2 year project -- looks like over 2 years. Loved every minute! ________________________________ Message 31 ____________________________________ Time: 07:10:05 PM PST US From: "Rick Holland" Subject: Re: Pietenpol-List: Elevator cables I am in the same boat Oscar, unlike building a new dining room table I always have the concern in the back of my head that if I do it wrong I may die. So I measure everything a dozen times, review the archives on the subject, agonize for a while and then finally make a cut. I have gotten a lot better over this last year though. That's whats so good about going to Broadhead and talking to the successful builders. You can get a good perspective on what really needs to be perfect and what doesn't. After the first one building a second Piet would be a piece of cake (still a time consuming task, but with so much less research and agonizing). Rick > What's funny is that it is so easy to say all this stuff now that I have > an > airplane to fly. Back before I did, I'd worry and fret and fuss and think > and sketch and build cardboard and string and popsicle stick parts (all of > which are good things to do, mind you), but now when I read about somebody > fretting about things like this when they could have already completed the > part and gotten it covered, getting them that much closer to actually > flying, I want to say the same thing everybody told me back then: "just > hurry up and build it, because flying these airplanes is so much fun!" > > -- Rick Holland ObjectAge Ltd. Castle Rock, Colorado ________________________________ Message 32 ____________________________________ Time: 07:16:08 PM PST US From: "Catdesigns" Subject: Pietenpol-List: Wood Landing Gear Strut Fitting For those of you with the wood landing gear, do I weld around the two flat pieces that form the attachment for the strut? See attached drawing. I know I am supposed to weld where they come out of the flat plate. Chris Tracy Sacramento, Ca Website at http://www.Westcoastpiet.com ________________________________ Message 33 ____________________________________ Time: 07:17:37 PM PST US From: "Catdesigns" Subject: Pietenpol-List: Wood Landing Gear Strut Fitting Woops forgot the attachment For those of you with the wood landing gear, do I weld around the two flat pieces that form the attachment for the strut? See attached drawing. I know I am supposed to weld where they come out of the flat plate. Chris Tracy Sacramento, Ca Website at http://www.Westcoastpiet.com ________________________________ Message 34 ____________________________________ Time: 07:22:04 PM PST US From: "Catdesigns" Subject: Re: Pietenpol-List: Pietenpol Directory Hey Jim!, glad to see, umm hear, your still out there building. Chris Tracy Sacramento, Ca Website at http://www.Westcoastpiet.com Do not archive ----- Original Message ----- From: jimboyer@hughes.net To: pietenpol-list@matronics.com Sent: Sunday, June 10, 2007 4:39 PM Subject: Re: Pietenpol-List: Pietenpol Directory Jim Boyer number reserved now; 499JB Santa Rosa, CA 95403 Pietenpol Aircamper, Corvair power (have engine ready to build once crank is nitrided) All wing ribs done, tail surfaces done, fuselage wood structure done, control sticks assembly done Working on steel aileron, stabilizer, rudder horns. Cheers, Jim ________________________________ Message 35 ____________________________________ Time: 07:37:56 PM PST US From: "Rick Holland" Subject: Re: Pietenpol-List: Re Elevator cables When I was looking at the uncovered Piet at the original Pietenpol hanger at Oshkosh I noticed that the upper elevator cables went through nylon fairleads on the outside of the fuselage which raised the cables. I did the same thing which raised the top cables enough to prevent touching the elevator. Rick On 6/5/07, Graham and Robyn wrote: > > Any thoughts/advice on this would be appreciated. > > Does the tension vary between upper & lower cables at full deflection? > > If so can this be avoided. > > Any way of stopping the top cable from rubbing on the L,E of tail plane? > > Had considered raising the height of the bell crank in fuse but this could > gear down the amount of travel avail for the elevtor. > > > Thanks Graham > > fuse 75% tail surfaces 100% has taken 10 months > > * > > > * > > -- Rick Holland ObjectAge Ltd. Castle Rock, Colorado ________________________________ Message 36 ____________________________________ Time: 07:54:08 PM PST US From: Isablcorky@aol.com Subject: Re: Pietenpol-List: Pietenpol Directory John, Would be helpful if you would include your last name and location CMC ************************************** See what's free at http://www.aol.com. ________________________________ Message 37 ____________________________________ Time: 08:29:36 PM PST US Subject: RE: Pietenpol-List: Pietenpol Directory From: "Arden Adamson" Corky, Add me to your builder list also. I posted a response earlier but didnt' see it come up on the Piet-list. Arden Adamson N1450 Spencer Lake Ct. Waupaca, WI 54981 715-258-4238 Building the long Piet with Jenny Gear, Corvair, three piece wing. Have fuselage structure done, building second set of ribs (Riblett airfoil), tail frames done, some parts of control system in place. Enjoying the discussions on the Piet list. ________________________________ From: owner-pietenpol-list-server@matronics.com on behalf of Isablcorky@aol.com Sent: Sun 6/10/2007 9:53 PM Subject: Re: Pietenpol-List: Pietenpol Directory John, Would be helpful if you would include your last name and location CMC ________________________________ See what's free at AOL.com . ________________________________ Message 38 ____________________________________ Time: 08:45:55 PM PST US From: "gcardinal" Subject: Re: Pietenpol-List: Wood Landing Gear Strut Fitting Yes, Chris, you weld all the way around the edge of the two flat pieces. Greg Cardinal Minneapolis ----- Original Message ----- From: "Catdesigns" Sent: Sunday, June 10, 2007 9:18 PM Subject: Pietenpol-List: Wood Landing Gear Strut Fitting > Woops forgot the attachment > > For those of you with the wood landing gear, do I weld around the two flat > pieces that form the attachment for the strut? See attached drawing. I > know I am supposed to weld where they come out of the flat plate. > > > Chris Tracy > Sacramento, Ca > Website at http://www.Westcoastpiet.com > ________________________________ Message 39 ____________________________________ Time: 08:50:57 PM PST US Subject: RE: Pietenpol-List: Pietenpol Directory From: "Steve Eldredge" Sheesh. Don't look at me email fer a day and look what happens.... Steve E here A-65 powered three piece wing with 4' center section. Fuse is stretched 7 inches, didn't know about the long fuse at the time. Bungee gear, Aluminum struts from a chair factory. Latex paint. Flying since November 1997. M. Cuy Smoke system. Need to get it smokin again! (it has been a while) 350 hours. Sold piet caps to pay for my first trip to Brodhead. Big E on the rudder cause I think it looks distinctive. Last flight -yesterday TP bombing run, with my 9 year old son as bombardier. Just finished a restore of a 1947 Stinson -also with the trademark 'E' Steve Eldredge Spanish Fork UT From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Isablcorky@aol.com Sent: Saturday, June 09, 2007 4:35 PM Subject: Pietenpol-List: Pietenpol Directory Isabelle frequently asks where some Pieter lives when I mention something said or done on this list. I always have to say, " dang if I know". So I'm starting with this e mail to create some sort of directory. At least list your name, status of your aircraft, and city and state. If you desire to disclose more info thats your business. At least let it be known whether you're yank, reb, or californian type. If this e mail has no more than one name during the next week I'll get the message. Claude M Corbett, "Corky" "Nathan" "Levi" Refurbishing a complete Aeronca L-3 65TAC 625 Pierremont Rd Defender. Shreveport, La 71106 2. ________________________________ See what's free at AOL.com . ________________________________ Message 40 ____________________________________ Time: 09:17:39 PM PST US From: "Catdesigns" Subject: Re: Pietenpol-List: Wood Landing Gear Strut Fitting Thank Greg. Guess I need to practice that now. Chris Tracy Sacramento, Ca Website at http://www.Westcoastpiet.com ----- Original Message ----- From: "gcardinal" Sent: Sunday, June 10, 2007 8:45 PM Subject: Re: Pietenpol-List: Wood Landing Gear Strut Fitting > > Yes, Chris, you weld all the way around the edge of the two flat pieces. > > Greg Cardinal > Minneapolis > > ----- Original Message ----- > From: "Catdesigns" > To: > Sent: Sunday, June 10, 2007 9:18 PM > Subject: Pietenpol-List: Wood Landing Gear Strut Fitting > > >> Woops forgot the attachment >> >> For those of you with the wood landing gear, do I weld around the two >> flat >> pieces that form the attachment for the strut? See attached drawing. I >> know I am supposed to weld where they come out of the flat plate. >> >> >> Chris Tracy >> Sacramento, Ca >> Website at http://www.Westcoastpiet.com >> > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.