---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Fri 06/15/07: 11 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:06 AM - PIETENPOL DIRECTORY (Jeff Hill) 2. 06:23 AM - Re: PIETENPOL DIRECTORY (Glenn W. Thomas) 3. 07:09 AM - Re: PIETENPOL DIRECTORY (Rick Holland) 4. 07:33 AM - Re: PIETENPOL DIRECTORY (Glenn W. Thomas) 5. 07:52 AM - Re: PIETENPOL DIRECTORY (Max Hegler) 6. 09:11 AM - Model A specs? (LWATCDR) 7. 10:45 AM - Re: PIETENPOL DIRECTORY (Glenn W. Thomas) 8. 11:26 AM - Re: PIETENPOL DIRECTORY (Max Hegler) 9. 01:08 PM - Model A specs? (Oscar Zuniga) 10. 09:00 PM - Update on NX92GB, and the wyncoop WACO fly-in (shad bell) 11. 10:34 PM - Re: Model A specs? (Clif Dawson) ________________________________ Message 1 _____________________________________ Time: 06:06:33 AM PST US From: Jeff Hill Subject: Pietenpol-List: PIETENPOL DIRECTORY Please add: Jeff Hill 4 Avenue Twenty Trophy Club, TX 76262 817/491-4532 Building slowly two long fuse piets; woodwork done. _________________________________________________________________ Play free games, earn tickets, get cool prizes! Join Live Search Club.- http://club.live.com/home.aspx?icid=CLUB_wlmailtextlink ________________________________ Message 2 _____________________________________ Time: 06:23:35 AM PST US Subject: Re: Pietenpol-List: PIETENPOL DIRECTORY From: "Glenn W. Thomas" Hi, I just put you in. Just a note... If you go to http://www.flyingwood.com/addDirectory you can add yourself. Also, if you go to http://www.flyingwood.com there is a link on the upper left entitled "Piet Directory" under Community Links that shows the existing directory. At the bottom of the directory is the link to the page that you can add yourself with. I will try and add everyone else that replied to the forum. Corky, can you send over any emails that were directed to you personally? Glenn ________________________________ Message 3 _____________________________________ Time: 07:09:10 AM PST US From: "Rick Holland" Subject: Re: Pietenpol-List: PIETENPOL DIRECTORY Glenn - FYI, I get a 404 trying to go to http://www.flyingwood.com/addDirectory, no problem getting to http://www.flyingwood.com. RIck On 6/15/07, Glenn W. Thomas wrote: > > glennthomas@flyingwood.com> > > Hi, > I just put you in. Just a note... > If you go to http://www.flyingwood.com/addDirectory you can add yourself. > > Also, if you go to http://www.flyingwood.com there is a link on the upper > left entitled "Piet Directory" under Community Links that shows the > existing directory. At the bottom of the directory is the link to the > page that you can add yourself with. > > I will try and add everyone else that replied to the forum. > > Corky, can you send over any emails that were directed to you personally? > > Glenn > > -- Rick Holland ObjectAge Ltd. Castle Rock, Colorado ________________________________ Message 4 _____________________________________ Time: 07:33:47 AM PST US Subject: Re: Pietenpol-List: PIETENPOL DIRECTORY From: "Glenn W. Thomas" My bad. I left .asp off the end of the link. I meant to say... http://www.flyingwood.com/addDirectory.asp You shouldn't have any problems using the link on the home page. On Fri, June 15, 2007 9:08 am, Rick Holland wrote: > Glenn - FYI, I get a 404 trying to go to > http://www.flyingwood.com/addDirectory, no problem getting to > http://www.flyingwood.com. > > > RIck > > > On 6/15/07, Glenn W. Thomas wrote: > >> >> glennthomas@flyingwood.com> >> >> Hi, >> I just put you in. Just a note... >> If you go to http://www.flyingwood.com/addDirectory you can add >> yourself. >> >> Also, if you go to http://www.flyingwood.com there is a link on the >> upper left entitled "Piet Directory" under Community Links that shows >> the existing directory. At the bottom of the directory is the link to >> the page that you can add yourself with. >> >> I will try and add everyone else that replied to the forum. >> >> >> Corky, can you send over any emails that were directed to you >> personally? >> >> Glenn >> >> >> >> >> >> >> > > > -- > Rick Holland > ObjectAge Ltd. > Castle Rock, Colorado > > ________________________________ Message 5 _____________________________________ Time: 07:52:34 AM PST US From: "Max Hegler" Subject: Re: Pietenpol-List: PIETENPOL DIRECTORY Same for me, but I went to the link at the bottom of the directory and it worked fine... Max ----- Original Message ----- From: Rick Holland To: pietenpol-list@matronics.com Sent: Friday, June 15, 2007 9:08 AM Subject: Re: Pietenpol-List: PIETENPOL DIRECTORY Glenn - FYI, I get a 404 trying to go to http://www.flyingwood.com/addDirectory, no problem getting to http://www.flyingwood.com. RIck On 6/15/07, Glenn W. Thomas < glennthomas@flyingwood.com> wrote: glennthomas@flyingwood.com> Hi, I just put you in. Just a note... If you go to http://www.flyingwood.com/addDirectory you can add yourself. Also, if you go to http://www.flyingwood.com there is a link on the upper left entitled "Piet Directory" under Community Links that shows the existing directory. At the bottom of the directory is the link to the page that you can add yourself with. I will try and add everyone else that replied to the forum. Corky, can you send over any emails that were directed to you personally? ________________________________ Message 6 _____________________________________ Time: 09:11:59 AM PST US From: LWATCDR Subject: Pietenpol-List: Model A specs? I was just wondering if anybody knows off the top of their head some specs on the Model A motor? What does it weigh, what RPM it turns, and what size prop? I have an idea for a different auto conversion to try and I just want to see if it will even be in the ball park. ________________________________ Message 7 _____________________________________ Time: 10:45:30 AM PST US Subject: Re: Pietenpol-List: PIETENPOL DIRECTORY From: "Glenn W. Thomas" If anybody has entered something they wish they could change/correct. I added an edit page. Click on the edit link at the top of the directory. There is a new entry link and another link for editting existing entries. It should be fairly intuitive. This is what programmers do at lunch:) http://www.flyingwood.com/directory.asp ________________________________ Message 8 _____________________________________ Time: 11:26:06 AM PST US From: "Max Hegler" Subject: Re: Pietenpol-List: PIETENPOL DIRECTORY Glenn, Great site...Thanks! Max ----- Original Message ----- From: "Glenn W. Thomas" Sent: Friday, June 15, 2007 12:44 PM Subject: Re: Pietenpol-List: PIETENPOL DIRECTORY > > > If anybody has entered something they wish they could change/correct. I > added an edit page. Click on the edit link at the top of the directory. > There is a new entry link and another link for editting existing entries. > It should be fairly intuitive. > > This is what programmers do at lunch:) > > http://www.flyingwood.com/directory.asp > > > ________________________________ Message 9 _____________________________________ Time: 01:08:09 PM PST US From: "Oscar Zuniga" Subject: Pietenpol-List: Model A specs? I'll have to look through my stuff at home to see what the engine weight and prop size are, but the Ford A engine was rated 40 HP @ 2200 RPM so that would give you a good idea of prop size. Using any of the online prop size calculators and a prop diameter of, say, 72", you get a theoretical pitch of 36. So that is a 72x36 prop at 70 MPH, 2200 RPM, 40HP and about 72% prop efficiency. Which may be not be anywhere near reality, but maybe a start point. Oscar Zuniga San Antonio, TX mailto: taildrags@hotmail.com website at http://www.flysquirrel.net _________________________________________________________________ Dont miss your chance to WIN $10,000 and other great prizes from Microsoft ________________________________ Message 10 ____________________________________ Time: 09:00:52 PM PST US From: shad bell Subject: Pietenpol-List: Update on NX92GB, and the wyncoop WACO fly-in ________________________________ Message 11 ____________________________________ Time: 10:34:04 PM PST US From: Clif Dawson Subject: Re: Pietenpol-List: Model A specs? Better look into this before assuming 40 hp. http://users.aol.com/gmaclaren/dyno.html And here's one prop calc. http://www.mail2600.com/PropDesign/index.html And the F+G manual lists 244 lb for the bare engine. Clif ----- Original Message ----- From: "Oscar Zuniga" Sent: Friday, June 15, 2007 1:07 PM Subject: Pietenpol-List: Model A specs? > > > I'll have to look through my stuff at home to see what the engine weight > and prop size are, but the Ford A engine was rated 40 HP @ 2200 RPM so > that ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.