Today's Message Index:
----------------------
1. 07:18 AM - Re: Anyone going to Arlington tomorrow evening? (Jim Markle)
2. 09:46 AM - douglas fir (Douwe Blumberg)
3. 12:17 PM - Re: douglas fir (Terry Hall)
4. 01:24 PM - Re: douglas fir (Brown Gravy)
5. 02:26 PM - Anyone going to Arlington tomorrow evening? (BYD@att.net)
6. 03:50 PM - Re: douglas fir (jimboyer@hughes.net)
7. 11:53 PM - Re: Anyone going to Arlington tomorrow evening? (Clif Dawson)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Anyone going to Arlington tomorrow evening? |
Thanks for the note, Gene!
Actually, meeting up with the Flybaby group would be neat. That name is
pretty high up on my list of favorite homebuilts!
I'm just hoping the rain holds off so I can spend some time there tonite!
Thanks again.
jm
----- Original Message -----
From: Gene & Tammy
Sent: Thursday, July 12, 2007 12:05 PM
Subject: Re: Pietenpol-List: Anyone going to Arlington tomorrow evening?
Jim, I follow the flybaby site as well as this site (it's a wood plane) and
I find the members very knowledgeable and frendly. If you don't find any
Pieters I think it would be worth your while to go talk with them. They are
having an open BBQ. If you will go to
http://groups.yahoo.com/group/flybabylist/message/7260 you will find the
invite and directions. Only wish I could be there.
let me know if it works out
Gene
----- Original Message -----
From: Jim Markle
Sent: Thursday, July 12, 2007 10:29 AM
Subject: Pietenpol-List: Anyone going to Arlington tomorrow evening?
I'm in town on business and might get to go over around 5:00pm for some
wandering around...
Any other Piet folks gonna be around?
Jim Markle (currently in Tulalip...)
214.505.6101
href="http://www.matronics.com/Navigator?Pietenpol-List">http://www.matronics.com/Navigator?Pietenpol-List
href="http://forums.matronics.com">http://forums.matronics.com
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
I don't know if you can get super small quantities, but ck out Bear
Creek Lumber.
I know they sell "select vertical grain DF". They shipped me a bunch
for a house project from WA to KY and it was still a deal.
They sent me sample pics of their stacks. For extra, somebody there
might hand choose some pieces for you.
Never tried them for airplane stuff, but that's their specialty.
google search them
Douwe
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Douwe,
I sent them an inquiry today to see how much my small amount would cost.
A "signicant handling charge" accompanies small orders. I thought I
would at least check it out.
Thanks, Terry
----- Original Message -----
From: Douwe Blumberg
To: pietenpolgroup
Sent: Friday, July 13, 2007 11:38 AM
Subject: Pietenpol-List: douglas fir
I don't know if you can get super small quantities, but ck out Bear
Creek Lumber.
I know they sell "select vertical grain DF". They shipped me a bunch
for a house project from WA to KY and it was still a deal.
They sent me sample pics of their stacks. For extra, somebody there
might hand choose some pieces for you.
Never tried them for airplane stuff, but that's their specialty.
google search them
Douwe
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Have you tried "craigslist"? You may have luck there.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=123647#123647
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Anyone going to Arlington tomorrow evening? |
Went to Arlington Thursday 7/12/07 and saw one Piet/GN1 a nice one from Ellensburg.
Looked like a fun one! Sorry I missed you Jim.
Bill
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Hi Terry,
Go to your local lumberyard and check if they stock clear Douglas Fir flooring.
My lumberyard does and my entire Piet is made of it.
The planks are typically 7 to 9 inches in width and anywhere from 10 to 16 feet
long. If they will let you go through the stack you will find a lot of them are
almost perfect quartersawn and almost all of mine are 10 to 16 growth rings
per inch. They only have to be 8 rings per inch if I remember right. The planks
will be S4S and their thickness will be 3/4 inch to 11/16 inch. All of my longerons
and uprights are 1"x3/4" and in my personal (do your own tests) tests
all are as strong as or stronger than 1"x1" spruce.
You do have to be a little careful to use sharp saw blades and watch for splintering,
but I have had absolutely no trouble.
Cheers, Jim
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Anyone going to Arlington tomorrow evening? |
That wouldn't be this one, would it?
Clif
>
> Went to Arlington Thursday 7/12/07 and saw one Piet/GN1 - a nice one from
> Ellensburg. Looked like a fun one! Sorry I missed you Jim.
>
> Bill
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|