Today's Message Index:
----------------------
1. 04:23 AM - Re: Re: Rib Re-inforcing tapes (Phillips, Jack)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Rib Re-inforcing tapes |
I found it very useful to put a couple of coats of PolyBrush straight
onto the reinforcing tape before putting down the finish tape. That
reinforcing tape really sucks up the Polybrush and if you don't have it
pretty well saturated and sealed with Polybrush before putting down the
finish tapes, the finish tape will be "dry" in the area around the
reinforcing tape.
Jack Phillips
NX899JP
-----Original Message-----
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of dwilson
Sent: Tuesday, December 18, 2007 8:13 PM
Subject: Pietenpol-List: Re: Rib Re-inforcing tapes
If you follow the sequence in the Poly-Fiber Manual you seal the fabric
with poly-brush prior to applying the re-inforcing tape. After you
apply the reinforcing tapes and rib stitch, this tape will get a coat of
poly-brush applied prior to the application of the pinked finishing
tapes. ( Hint ) use a straight edge and a number 2 pencil to draw two
parallel lines 1 inch from the center on both sides of each rib. Apply
the bed of poly-brush between the lines. Cut your tapes with a razor
blade by holding the blade perpindicular to the fabric and pulling the
tape against the blade. This is how the Pro's from Poly Fiber do it.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=152993#152993
_________________________________________________
or otherwise private information. If you have received it in error, please notify
the sender
Dansk - Deutsch - Espanol - Francais - Italiano - Japanese - Nederlands - Norsk
- Portuguese
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|