---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Wed 02/13/08: 9 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:51 AM - Re: Quotes--Redford to Axel (MikeD) 2. 05:52 AM - Re: PM'ing, I am having problems.. (MikeD) 3. 07:09 AM - Re: Re: PM'ing, I am having problems.. (Phillips, Jack) 4. 07:18 AM - Re: Re: PM'ing, I am having problems.. (Bill Church) 5. 07:55 AM - Re: Re: PM'ing, I am having problems.. (Ryan Mueller) 6. 10:36 AM - Re: PM'ing, I am having problems.. (MikeD) 7. 11:11 AM - PMing, I am having problems (Oscar Zuniga) 8. 04:09 PM - Rib questions (Ryan Mueller) 9. 08:10 PM - Re: Rib questions (jimboyer@hughes.net) ________________________________ Message 1 _____________________________________ Time: 05:51:30 AM PST US Subject: Pietenpol-List: Re: Quotes--Redford to Axel From: "MikeD" Hey, I just saw you in the EAA vid! Nice rocker covers btw, we're planning to do that to our A-75. - another Mike -------- Piet-builder-who-hopes-to-be-flying-next-summer Read this topic online here: http://forums.matronics.com/viewtopic.php?p=163820#163820 ________________________________ Message 2 _____________________________________ Time: 05:52:46 AM PST US Subject: Pietenpol-List: Re: PM'ing, I am having problems.. From: "MikeD" Okay, I give up.. [Crying or Very sad] Nobody answered and even Matt hasn't replied. No PM's for me I suppose. -------- Piet-builder-who-hopes-to-be-flying-next-summer Read this topic online here: http://forums.matronics.com/viewtopic.php?p=163823#163823 ________________________________ Message 3 _____________________________________ Time: 07:09:27 AM PST US Subject: RE: Pietenpol-List: Re: PM'ing, I am having problems.. From: "Phillips, Jack" What's a PM? Jack Phillips NX899JP -----Original Message----- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of MikeD Sent: Wednesday, February 13, 2008 8:50 AM Subject: Pietenpol-List: Re: PM'ing, I am having problems.. Okay, I give up.. [Crying or Very sad] Nobody answered and even Matt hasn't replied. No PM's for me I suppose. -------- Piet-builder-who-hopes-to-be-flying-next-summer Read this topic online here: http://forums.matronics.com/viewtopic.php?p=163823#163823 _________________________________________________ or otherwise private information. If you have received it in error, please notify the sender Dansk - Deutsch - Espanol - Francais - Italiano - Japanese - Nederlands - Norsk - Portuguese ________________________________ Message 4 _____________________________________ Time: 07:18:13 AM PST US From: "Bill Church" Subject: RE: Pietenpol-List: Re: PM'ing, I am having problems.. Pietenpol Memory :) Do not archive -----Original Message----- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Phillips, Jack Sent: Wednesday, February 13, 2008 10:07 AM Subject: RE: Pietenpol-List: Re: PM'ing, I am having problems.. --> What's a PM? Jack Phillips NX899JP -----Original Message----- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of MikeD Sent: Wednesday, February 13, 2008 8:50 AM Subject: Pietenpol-List: Re: PM'ing, I am having problems.. Okay, I give up.. [Crying or Very sad] Nobody answered and even Matt hasn't replied. No PM's for me I suppose. -------- Piet-builder-who-hopes-to-be-flying-next-summer ________________________________ Message 5 _____________________________________ Time: 07:55:50 AM PST US From: Ryan Mueller Subject: Re: Pietenpol-List: Re: PM'ing, I am having problems.. Mike, I'm assuming you are accessing the list via the web forum @ forum.matronics.com. The problem may be that the person you are trying to PM (private message) is not posting their messages or accessing the list via the web forum. For example, I am setup to receive individual messages from the list via my Yahoo account, and then I filter them into a Piet folder. I do not use the web forum. Therefore, if you were to try to PM me, I'm pretty sure I would never know. I believe the only way you could PM me is if I were to setup a username at the web forum, and then your private message would reach me when I logged in. That's my guess as to what is going on. If the peson you want to contact is unreachable via PM, you could always email them directly. Hope that helps, Ryan Okay, I give up.. [Crying or Very sad] Nobody answered and even Matt hasn't replied. No PM's for me I suppose. --------------------------------- Never miss a thing. Make Yahoo your homepage. ________________________________ Message 6 _____________________________________ Time: 10:36:40 AM PST US Subject: Pietenpol-List: Re: PM'ing, I am having problems.. From: "MikeD" [quote="rmueller23(at)yahoo.com"]Mike, That's my guess as to what is going on. If the peson you want to contact is unreachable via PM, you could always email them directly. Hope that helps, Ryan quote] Thanks Ryan, But my messages stay in the Outbox after I hit "submit". Even if the recipient address was bogus they should still make it out of there, shouldn't they? I dunno.. - Mike -------- Piet-builder-who-hopes-to-be-flying-next-summer Read this topic online here: http://forums.matronics.com/viewtopic.php?p=163879#163879 ________________________________ Message 7 _____________________________________ Time: 11:11:57 AM PST US From: Oscar Zuniga Subject: Pietenpol-List: PMing, I am having problems Jack asked- >What's a PM? Not sure, but I do know that if it comes with an "S" after it, it's no good. At least I remember that from the days before my wife had her operation to convert the "family room" to a "play room" ;o) Oscar Zuniga San Antonio, TX mailto: taildrags@hotmail.com website at http://www.flysquirrel.net ________________________________ Message 8 _____________________________________ Time: 04:09:29 PM PST US From: Ryan Mueller Subject: Pietenpol-List: Rib questions Good evening everyone, We need a little advice before we proceed with the rib building. I have been going back on forth on which method to use when it comes to jig setup. We have our base built out of two pieces of 3/8 ply glued together. We also have the full size rib print. I have read numerous posts on how you can't necessarily utilize that print, due to the expansion/contraction of the paper over time. The only dimension on the print is the 27 3/4" between the rear of the front spar and the front of the rear spar. When we measure between those points on the full size print it does actually come out to be 27 3/4". I also measured the thickness of the rib at the rear of both spars on the full size print, and both measurements comes out within 1/16" of the nearest listed dimensions from the plans (listed as 5 9/16" for the front, 5 9/32" for the rear on the plans). I don't know what else to check to ensure that the print is good to go. Is there something I'm missing here, or should we just be able to glue the full size print down and start building the rest of the jig (instead of lofting all the dimensions)? One other issue is the difference between the leading edge of the rib in the plans, and on the full size print. On the '33 plans it looks like the front member of the rib that completes the flat nose that the leading edge bolts to is a 1/4 x 1/2" piece, just like all the other rib material. On the full size print there is a note there that says "1/2 x1/2 inch block". Should we get some 1/2 x 1/2" spruce to make the front member, or will the 1/4 x 1/2" shown on the plans be sufficient? Thanks, Ryan --------------------------------- Never miss a thing. Make Yahoo your homepage. ________________________________ Message 9 _____________________________________ Time: 08:10:18 PM PST US From: "jimboyer@hughes.net" Subject: Re: Pietenpol-List: Rib questions Hi Ryan, Do not use any liquid glue to glue the print down, that makes the paper expand. Just pin it down is best or use a spray glue that really won't wet the paper. Once the paper is glued down it will not change dimensions so you can use it. I used the print and just measured it at the start and after the blocks are put down to hold the pieces of the rib in place they will all come all exactly the same (within your workmanship anyway). Cheers, Jim ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.