Today's Message Index:
----------------------
1. 05:48 AM - appliance epoxy (Douwe Blumberg)
2. 05:58 AM - Re: appliance epoxy (Gary Boothe)
3. 06:17 AM - Re: appliance epoxy (Bill Church)
4. 08:45 AM - Fw:Dick Carden is needing help. (KMHeide, BA, CPO, FAAOP)
5. 11:35 AM - Re: Fw:Dick Carden is needing help. (John Recine)
6. 11:58 AM - Re: Fw:Dick Carden is needing help. (John Recine)
7. 12:50 PM - Re: Fw:Dick Carden is needing help. ()
8. 02:04 PM - Larry Cowell's Pietenpol (tom sargent)
9. 04:34 PM - Re: Fw:Dick Carden is needing help. (John Recine)
10. 04:53 PM - Re: Fw:Dick Carden is needing help. (John Hofmann)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Jack,
I'm married and have been using appliance epoxy (the spray cans available at
most hardware stores) and baking it for about 20 minutes in our kitchen
oven. There might be some odor but it's pretty minimal. My wife who has a
sense of smell on par with a bloodhound has never complained. I must admit
timing my "culinary experiments" for right about the time she leaves the
house for a while.
There is a big difference in the hardness of the paint between baking and
unbaked. Unbaked I can scratch it with my nail, baked I cannot.
Douwe
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Douwe,
Do you also bake at 250deg.?
Happy 4th!
Gary Boothe
Cool, Ca.
Pietenpol
WW Corvair Conversion
Tail done, working on fuselage
(10 ribs down.)
-----Original Message-----
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Douwe
Blumberg
Sent: Friday, July 04, 2008 5:47 AM
Subject: Pietenpol-List: appliance epoxy
<douweblumberg@earthlink.net>
Jack,
I'm married and have been using appliance epoxy (the spray cans available at
most hardware stores) and baking it for about 20 minutes in our kitchen
oven. There might be some odor but it's pretty minimal. My wife who has a
sense of smell on par with a bloodhound has never complained. I must admit
timing my "culinary experiments" for right about the time she leaves the
house for a while.
There is a big difference in the hardness of the paint between baking and
unbaked. Unbaked I can scratch it with my nail, baked I cannot.
Douwe
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Douwe,
While I realize you no doubt intended it as a compliment, you're a brave man
to refer to any of your wife's attributes as being on par with a bloodhound.
You're likely brave enough to buy her appliances for her birthday. :)
Bill C.
Do Not Archive
-----Original Message-----
--> <douweblumberg@earthlink.net>
... My wife who has a sense of smell on par with a bloodhound has never
complained.
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Fw:Dick Carden is needing help. |
Kenneth M. Heide, BA, CPO, FAAOP
-
--- On Fri, 7/4/08, Dick Carden <flywrite@verizon.net> wrote:
From: Dick Carden <flywrite@verizon.net>
Subject: Message Posting
Ken: For some reason, I'm unable to post a message to the Piet list, and I
wonder if you'd be so kind as to post it for me while I try to figure out
what I'm doing wrong, or where the glitch is. The message Ive been tryin
g
to post follows: I made the dumb mistake of leaving my car unlocked with my
briefcase on the front floorboard. I wasnt gone five minutes, but that
s all
it took. It was a really old, beat up briefcase, and for years Id carrie
d it
there, thinking no one would want it. One catch was broken, one corner brok
en
so that you could see inside. I just used it to carry stuff between hangar
and
home. Unfortunately, this time I had most of my set of GN-1 plans. Theyr
e no
longer available from Grega, so Im in a real fix, and I need help. Iv
e
finished the tail feathers the fuselage is on wheels, but Ive only just
gotten started on the wings. Ive got the ribs on the spars of the left w
ing.
Ive made all the metal parts, but without the plans I dont know the
placement dimensions on the spars. Does anyone have set of wing that I coul
d
buy, rent, or borrow? I can probably figure out the missing fuselage info,
but
Id sure appreciate some help with the wings. Dick Carden.=0A=0A=0A
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Fw:Dick Carden is needing help. |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Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Fw:Dick Carden is needing help. |
Any idea what to make of this
Sent from my Verizon Wireless BlackBerry
-----Original Message-----
From: "John Recine" <AmsafetyC@aol.com>
Subject: Re: Pietenpol-List: Fw:Dick Carden is needing help.
Not too certain how much help this may be but I have a scan of my Piet drawings
if needed. I don't know how different they are from the GN1 but they may be of
help if no one has a set of GN1 prints to offer
Let me know off line. Please be advised this is not a general offer nor is it intended
to violate the trust agreement between myself and the Pieten family in
the reproduction and or sale of intelectual property. Just trying to help another
builder in a bind
That's about the best I can do
John
Sent from my Verizon Wireless BlackBerry
-----Original Message-----
From: "KMHeide, BA, CPO, FAAOP" <kmheidecpo@yahoo.com>
Subject: Pietenpol-List: Fw:Dick Carden is needing help.
Kenneth M. Heide, BA, CPO, FAAOP
--- On Fri, 7/4/08, Dick Carden <flywrite@verizon.net> wrote:
From: Dick Carden <flywrite@verizon.net>
Subject: Message Posting
Ken: For some reason, I'm unable to post a message to the Piet list, and I
wonder if you'd be so kind as to post it for me while I try to figure out
what I'm doing wrong, or where the glitch is. The message Ie been trying
to post follows: I made the dumb mistake of leaving my car unlocked with my
briefcase on the front floorboard. I wasn gone five minutes, but that all
it took. It was a really old, beat up briefcase, and for years I carried it
there, thinking no one would want it. One catch was broken, one corner broken
so that you could see inside. I just used it to carry stuff between hangar and
home. Unfortunately, this time I had most of my set of GN-1 plans. Theye no
longer available from Grega, so I in a real fix, and I need help. Ie
finished the tail feathers the fuselage is on wheels, but Ie only just
gotten started on the wings. Ie got the ribs on the spars of the left wing.
Ie made all the metal parts, but without the plans I don know the
placement dimensions on the spars. Does anyone have set of wing that I could
buy, rent, or borrow? I can probably figure out the missing fuselage info, but
I sure appreciate some help with the wings. Dick Carden.
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Fw:Dick Carden is needing help. |
John,
I think you have violated the trust and respect of the whole Pietenpol
community by making this offer. You will now have to be shunned from this
list for 6 months, you will not be allowed to attend Brodhead for three
years (unless you fly your Pietenpol there), and you will have to give up
your Verizon Wireless BlackBerry for a year.
I'm sorry but we must do this for you own good.
Don't worry about Dick, I just sent him an email offering to send him a copy
of my GN-1 plans. He already had a set of plans and I will never build from
mine so I think its safe. If not, he will just be keeping my backup copy,
which you can make legally, in case anything happens to the originals. When
I bought my GN-1 plans in 1998, they were only $25. Mr. Grega was
defiantly not making any money on the plans.
Chris Tracy
Sacramento, Ca
Website at http://www.WestCoastPiet.com
----- Original Message -----
From: "John Recine" <AmsafetyC@aol.com>
Sent: Friday, July 04, 2008 11:55 AM
Subject: Re: Pietenpol-List: Fw:Dick Carden is needing help.
>
> Any idea what to make of this
> Sent from my Verizon Wireless BlackBerry
>
> -----Original Message-----
> From: "John Recine" <AmsafetyC@aol.com>
>
> Date: Fri, 4 Jul 2008 18:32:06
> To: <pietenpol-list@matronics.com>
> Subject: Re: Pietenpol-List: Fw:Dick Carden is needing help.
>
>
> Not too certain how much help this may be but I have a scan of my Piet
> drawings if needed. I don't know how different they are from the GN1 but
> they may be of help if no one has a set of GN1 prints to offer
>
>
> Let me know off line. Please be advised this is not a general offer nor is
> it intended to violate the trust agreement between myself and the Pieten
> family in the reproduction and or sale of intelectual property. Just
> trying to help another builder in a bind
>
> That's about the best I can do
>
> John
> Sent from my Verizon Wireless BlackBerry
>
> -----Original Message-----
> From: "KMHeide, BA, CPO, FAAOP" <kmheidecpo@yahoo.com>
>
> Date: Fri, 4 Jul 2008 08:42:47
> To: Pietenpol<Pietenpol-List@matronics.com>
> Subject: Pietenpol-List: Fw:Dick Carden is needing help.
>
>
> Kenneth M. Heide, BA, CPO, FAAOP
>
>
> --- On Fri, 7/4/08, Dick Carden <flywrite@verizon.net> wrote:
>
> From: Dick Carden <flywrite@verizon.net>
> Subject: Message Posting
> To: kmheidecpo@yahoo.com
> Date: Friday, July 4, 2008, 7:37 AM
>
> Ken: For some reason, I'm unable to post a message to the Piet list, and I
> wonder if you'd be so kind as to post it for me while I try to figure out
> what I'm doing wrong, or where the glitch is. The message Ie been trying
> to post follows: I made the dumb mistake of leaving my car unlocked with
> my
> briefcase on the front floorboard. I wasn gone five minutes, but that all
> it took. It was a really old, beat up briefcase, and for years I carried
> it
> there, thinking no one would want it. One catch was broken, one corner
> broken
> so that you could see inside. I just used it to carry stuff between hangar
> and
> home. Unfortunately, this time I had most of my set of GN-1 plans. Theye
> no
> longer available from Grega, so I in a real fix, and I need help. Ie
> finished the tail feathers the fuselage is on wheels, but Ie only just
> gotten started on the wings. Ie got the ribs on the spars of the left
> wing.
> Ie made all the metal parts, but without the plans I don know the
> placement dimensions on the spars. Does anyone have set of wing that I
> could
> buy, rent, or borrow? I can probably figure out the missing fuselage info,
> but
> I sure appreciate some help with the wings. Dick Carden.
>
>
>
Message 8
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Larry Cowell's Pietenpol |
Forgive the spam, please, but I'm trying to help out an old friend.
Some of you may know Larry Cowell of Tucson. (He tells me he's given
rides to 300 people, some of which I'm sure went on to build a plane
themselves.) Larry, a P-51 pilot from WWII, built his Piet in 1976,
using a Lyc O-145-B2.
For health reasons, Larry now finds it necessary to sell his nifty red
airplane. You can get all the details and see pictures and contact info
at http://www.nixiebunny.com/pietenpol/
Thanks,
--
Tom Sargent,
Tucson
Message 9
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Fw:Dick Carden is needing help. |
I suppose a mans got to do what a mans got to do
Certainly did not want to endanger my piet membership but it was a fellow lover
of the blue that might be in need of assistance
Smile son we don't want to disconcert th masses!
John
Sent from my Verizon Wireless BlackBerry
-----Original Message-----
From: <catdesigns@att.net>
Subject: Re: Pietenpol-List: Fw:Dick Carden is needing help.
John,
I think you have violated the trust and respect of the whole Pietenpol
community by making this offer. You will now have to be shunned from this
list for 6 months, you will not be allowed to attend Brodhead for three
years (unless you fly your Pietenpol there), and you will have to give up
your Verizon Wireless BlackBerry for a year.
I'm sorry but we must do this for you own good.
Don't worry about Dick, I just sent him an email offering to send him a copy
of my GN-1 plans. He already had a set of plans and I will never build from
mine so I think its safe. If not, he will just be keeping my backup copy,
which you can make legally, in case anything happens to the originals. When
I bought my GN-1 plans in 1998, they were only $25. Mr. Grega was
defiantly not making any money on the plans.
Chris Tracy
Sacramento, Ca
Website at http://www.WestCoastPiet.com
----- Original Message -----
From: "John Recine" <AmsafetyC@aol.com>
Sent: Friday, July 04, 2008 11:55 AM
Subject: Re: Pietenpol-List: Fw:Dick Carden is needing help.
>
> Any idea what to make of this
> Sent from my Verizon Wireless BlackBerry
>
> -----Original Message-----
> From: "John Recine" <AmsafetyC@aol.com>
>
> Date: Fri, 4 Jul 2008 18:32:06
> To: <pietenpol-list@matronics.com>
> Subject: Re: Pietenpol-List: Fw:Dick Carden is needing help.
>
>
> Not too certain how much help this may be but I have a scan of my Piet
> drawings if needed. I don't know how different they are from the GN1 but
> they may be of help if no one has a set of GN1 prints to offer
>
>
> Let me know off line. Please be advised this is not a general offer nor is
> it intended to violate the trust agreement between myself and the Pieten
> family in the reproduction and or sale of intelectual property. Just
> trying to help another builder in a bind
>
> That's about the best I can do
>
> John
> Sent from my Verizon Wireless BlackBerry
>
> -----Original Message-----
> From: "KMHeide, BA, CPO, FAAOP" <kmheidecpo@yahoo.com>
>
> Date: Fri, 4 Jul 2008 08:42:47
> To: Pietenpol<Pietenpol-List@matronics.com>
> Subject: Pietenpol-List: Fw:Dick Carden is needing help.
>
>
> Kenneth M. Heide, BA, CPO, FAAOP
>
>
> --- On Fri, 7/4/08, Dick Carden <flywrite@verizon.net> wrote:
>
> From: Dick Carden <flywrite@verizon.net>
> Subject: Message Posting
> To: kmheidecpo@yahoo.com
> Date: Friday, July 4, 2008, 7:37 AM
>
> Ken: For some reason, I'm unable to post a message to the Piet list, and I
> wonder if you'd be so kind as to post it for me while I try to figure out
> what I'm doing wrong, or where the glitch is. The message Ie been trying
> to post follows: I made the dumb mistake of leaving my car unlocked with
> my
> briefcase on the front floorboard. I wasn gone five minutes, but that all
> it took. It was a really old, beat up briefcase, and for years I carried
> it
> there, thinking no one would want it. One catch was broken, one corner
> broken
> so that you could see inside. I just used it to carry stuff between hangar
> and
> home. Unfortunately, this time I had most of my set of GN-1 plans. Theye
> no
> longer available from Grega, so I in a real fix, and I need help. Ie
> finished the tail feathers the fuselage is on wheels, but Ie only just
> gotten started on the wings. Ie got the ribs on the spars of the left
> wing.
> Ie made all the metal parts, but without the plans I don know the
> placement dimensions on the spars. Does anyone have set of wing that I
> could
> buy, rent, or borrow? I can probably figure out the missing fuselage info,
> but
> I sure appreciate some help with the wings. Dick Carden.
>
>
>
Message 10
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Fw:Dick Carden is needing help. |
Must try to resist.... Must try to resist...
"He's just passing through, passing through."
The Mediocre John Hofmann
John Hofmann
Vice-President, Information Technology
The Rees Group, Inc.
2810 Crossroads Drive, Ste 3800
Madison, WI 53718
Phone: 608.443.2468 ext 150
Fax: 608.443.2474
Email: jhofmann@reesgroupinc.com
On Jul 4, 2008, at 6:28 PM, John Recine wrote:
> <AmsafetyC@aol.com>
>
> I suppose a mans got to do what a mans got to do
>
> Certainly did not want to endanger my piet membership but it was a
> fellow lover of the blue that might be in need of assistance
>
> Smile son we don't want to disconcert th masses!
>
> John
> Sent from my Verizon Wireless BlackBerry
>
> -----Original Message-----
> From: <catdesigns@att.net>
>
> Date: Fri, 4 Jul 2008 12:47:31
> To: <pietenpol-list@matronics.com>
> Subject: Re: Pietenpol-List: Fw:Dick Carden is needing help.
>
>
>
> John,
>
> I think you have violated the trust and respect of the whole Pietenpol
> community by making this offer. You will now have to be shunned
> from this
> list for 6 months, you will not be allowed to attend Brodhead for
> three
> years (unless you fly your Pietenpol there), and you will have to
> give up
> your Verizon Wireless BlackBerry for a year.
>
> I'm sorry but we must do this for you own good.
>
> Don't worry about Dick, I just sent him an email offering to send
> him a copy
> of my GN-1 plans. He already had a set of plans and I will never
> build from
> mine so I think its safe. If not, he will just be keeping my backup
> copy,
> which you can make legally, in case anything happens to the
> originals. When
> I bought my GN-1 plans in 1998, they were only $25. Mr. Grega was
> defiantly not making any money on the plans.
>
> Chris Tracy
> Sacramento, Ca
> Website at http://www.WestCoastPiet.com
>
>
> ----- Original Message -----
> From: "John Recine" <AmsafetyC@aol.com>
> To: <pietenpol-list@matronics.com>
> Sent: Friday, July 04, 2008 11:55 AM
> Subject: Re: Pietenpol-List: Fw:Dick Carden is needing help.
>
>
>> >
>>
>> Any idea what to make of this
>> Sent from my Verizon Wireless BlackBerry
>>
>> -----Original Message-----
>> From: "John Recine" <AmsafetyC@aol.com>
>>
>> Date: Fri, 4 Jul 2008 18:32:06
>> To: <pietenpol-list@matronics.com>
>> Subject: Re: Pietenpol-List: Fw:Dick Carden is needing help.
>>
>>
>> Not too certain how much help this may be but I have a scan of my
>> Piet
>> drawings if needed. I don't know how different they are from the
>> GN1 but
>> they may be of help if no one has a set of GN1 prints to offer
>>
>>
>> Let me know off line. Please be advised this is not a general offer
>> nor is
>> it intended to violate the trust agreement between myself and the
>> Pieten
>> family in the reproduction and or sale of intelectual property. Just
>> trying to help another builder in a bind
>>
>> That's about the best I can do
>>
>> John
>> Sent from my Verizon Wireless BlackBerry
>>
>> -----Original Message-----
>> From: "KMHeide, BA, CPO, FAAOP" <kmheidecpo@yahoo.com>
>>
>> Date: Fri, 4 Jul 2008 08:42:47
>> To: Pietenpol<Pietenpol-List@matronics.com>
>> Subject: Pietenpol-List: Fw:Dick Carden is needing help.
>>
>>
>>
>>
>>
>> Kenneth M. Heide, BA, CPO, FAAOP
>>
>>
>>
>>
>>
>> --- On Fri, 7/4/08, Dick Carden <flywrite@verizon.net> wrote:
>>
>> From: Dick Carden <flywrite@verizon.net>
>> Subject: Message Posting
>> To: kmheidecpo@yahoo.com
>> Date: Friday, July 4, 2008, 7:37 AM
>>
>> Ken: For some reason, I'm unable to post a message to the Piet
>> list, and I
>> wonder if you'd be so kind as to post it for me while I try to
>> figure out
>> what I'm doing wrong, or where the glitch is. The message Ie been
>> trying
>> to post follows: I made the dumb mistake of leaving my car unlocked
>> with
>> my
>> briefcase on the front floorboard. I wasn gone five minutes, but
>> that all
>> it took. It was a really old, beat up briefcase, and for years I
>> carried
>> it
>> there, thinking no one would want it. One catch was broken, one
>> corner
>> broken
>> so that you could see inside. I just used it to carry stuff between
>> hangar
>> and
>> home. Unfortunately, this time I had most of my set of GN-1 plans.
>> Theye
>> no
>> longer available from Grega, so I in a real fix, and I need help. Ie
>> finished the tail feathers the fuselage is on wheels, but Ie only
>> just
>> gotten started on the wings. Ie got the ribs on the spars of the left
>> wing.
>> Ie made all the metal parts, but without the plans I don know the
>> placement dimensions on the spars. Does anyone have set of wing
>> that I
>> could
>> buy, rent, or borrow? I can probably figure out the missing
>> fuselage info,
>> but
>> I sure appreciate some help with the wings. Dick Carden.
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|