Pietenpol-List Digest Archive

Sun 07/13/08


Total Messages Posted: 10



Today's Message Index:
----------------------
 
     1. 04:46 AM - New Sky Gypsy (Don Emch)
     2. 05:54 AM - Re: New Sky Gypsy (Pastor Mike)
     3. 07:53 AM - cowling hinge pins (Oscar Zuniga)
     4. 08:21 AM - Re: cowling hinge pins (bcharvet@bellsouth.net)
     5. 10:19 AM - Re: cowling hinge pins (walt)
     6. 11:58 AM - Re: New Sky Gypsy (Don Emch)
     7. 07:38 PM - Re: New Sky Gypsy (Bill Church)
     8. 08:11 PM - Re: Re: Annual Informal Brodhead Roll Call (Clif Dawson)
     9. 08:33 PM - Re: N444MH video (Kirk Huizenga)
    10. 10:40 PM - Re: New Sky Gypsy (Jim E)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 04:46:57 AM PST US
    Subject: New Sky Gypsy
    From: "Don Emch" <EmchAir@aol.com>
    For those that know Frank Pavliga's familiar old Sky Gypsy, I thought I'd post a shot of the new and improved Sky Gypsy. He out did himself on this one! Don Emch NX899DE Read this topic online here: http://forums.matronics.com/viewtopic.php?p=192440#192440 Attachments: http://forums.matronics.com//files/barber_fly_in_08_001_661.jpg


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:54:13 AM PST US
    From: Pastor Mike <miket@southslope.net>
    Subject: Re: New Sky Gypsy
    Wow that is a beautiful plane. Is that a Kinner or a Warner on the nose? Mike in Iowa Don Emch wrote: > > For those that know Frank Pavliga's familiar old Sky Gypsy, I thought I'd post a shot of the new and improved Sky Gypsy. He out did himself on this one! > > Don Emch > NX899DE > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=192440#192440 > > > Attachments: > > http://forums.matronics.com//files/barber_fly_in_08_001_661.jpg > > >


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:53:39 AM PST US
    From: Oscar Zuniga <taildrags@hotmail.com>
    Subject: cowling hinge pins
    Walt; that is a great idea! I just pulled the cowl on my airplane yesterday and was wondering about a way to secure the hinge pins. Although they have never worked loose, my A&P asked me about securing them when he did the last annual. Mine simply have legs bent on the ends (L-shaped) but that little locking hook is nifty. If you don't mind, I'm going to snag the photo and put it on my website for others to pick up. I put another 1.6 hours on 41CC yesterday in high and gusty winds, but it was great fun and landing on the grass at bicycle speed into the stiff wind was a piece of cake. I've sort of started to feel bad about the looks of the airplane. It's no hangar queen... not very clean, a bit of oil smudge here and there on the belly, fuel dye stains on the passenger floorboards, unused holes here and there, and the spray-can color of blue paint that I used on the rebuilt gear legs and cabanes doesn't quite match the PolyTone that Corky used on the rest of the airplane. However, the airplane flies great, gives me no trouble, and it smells like a real airplane everytime I climb into the cockpit. No apologies once the airplane leaves the ground, but I feel bad that I haven't kept it looking like it did when Corky first finished and flew it. Oscar Zuniga Air Camper NX41CC San Antonio, TX mailto: taildrags@hotmail.com website at http://www.flysquirrel.net


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:21:57 AM PST US
    From: bcharvet@bellsouth.net
    Subject: Re: cowling hinge pins


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:19:00 AM PST US
    From: "walt" <waltdak@verizon.net>
    Subject: Re: cowling hinge pins
    Oscar, Yes, please pass the cowl pin idea along walt evans NX140DL "Put your wealth in knowledge,,, and no one can ever take it from you" Benjamin Franklin ----- Original Message ----- From: "Oscar Zuniga" <taildrags@hotmail.com> Sent: Sunday, July 13, 2008 10:50 AM Subject: Pietenpol-List: cowling hinge pins > > > Walt; that is a great idea! I just pulled the cowl on my airplane > yesterday and was wondering about a way to secure the hinge pins. > Although they have never worked loose, my A&P asked me about securing them > when he did the last annual. Mine simply have legs bent on the ends > (L-shaped) but that little locking hook is nifty. If you don't mind, I'm > going to snag the photo and put it on my website for others to pick up. > > I put another 1.6 hours on 41CC yesterday in high and gusty winds, but it > was great fun and landing on the grass at bicycle speed into the stiff > wind was a piece of cake. > > I've sort of started to feel bad about the looks of the airplane. It's no > hangar queen... not very clean, a bit of oil smudge here and there on the > belly, fuel dye stains on the passenger floorboards, unused holes here and > there, and the spray-can color of blue paint that I used on the rebuilt > gear legs and cabanes doesn't quite match the PolyTone that Corky used on > the rest of the airplane. However, the airplane flies great, gives me no > trouble, and it smells like a real airplane everytime I climb into the > cockpit. No apologies once the airplane leaves the ground, but I feel bad > that I haven't kept it looking like it did when Corky first finished and > flew it. > > Oscar Zuniga > Air Camper NX41CC > San Antonio, TX > mailto: taildrags@hotmail.com > website at http://www.flysquirrel.net > > >


    Message 6


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 11:58:56 AM PST US
    Subject: Re: New Sky Gypsy
    From: "Don Emch" <EmchAir@aol.com>
    It's actually a Lambert. Which I believe is the same basic engine as the Velie. The Velie became the Lambert after an ownership change, I think. Mr. Pietenpol built an Air Camper with a Velie. I should have taken more pictures of it. It is a beauty! Don E. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=192498#192498


    Message 7


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:38:21 PM PST US
    Subject: Re: New Sky Gypsy
    From: "Bill Church" <billspiet@sympatico.ca>
    Wow Don, that really looks sharp. Nice picture. Do you have more? Sky Gypsy was always a great looking Pietenpol, but this transformation is something else. Do you know if Frank has flown it yet? It would be great if he could fly it to Brodhead. Bill C. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=192584#192584


    Message 8


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:11:40 PM PST US
    From: "Clif Dawson" <CDAWSON5854@shaw.ca>
    Subject: Re: Annual Informal Brodhead Roll Call
    http://www.driveintheater.com/index.htm ----- Original Message ----- From: John Recine To: pietenpol-list@matronics.com Sent: Friday, July 11, 2008 11:08 AM Subject: Re: Pietenpol-List: Re: Annual Informal Brodhead Roll Call What's a drive in? John Sent from my Verizon Wireless BlackBerry ------------------------------------------------------------------------- -----


    Message 9


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:33:05 PM PST US
    From: Kirk Huizenga <kirkh1@gmail.com>
    Subject: Re: N444MH video
    Santiago, I'm still working stuff out with Grant - I'll let you know what is happening as I find out. Peace Kirk On May 15, 2008, at 11:25 AM, santiago morete wrote: > Grant MacLaren authorized me to get a copy of the video he made > during N444MH building http://users.aol.com/bpanews/video.html > Someone offers to make a DVD copy for me? Off course I will pay for > it. Thanks! > Saludos > > Santiago > > PS:Finally working on the propeller and dreaming of going to > Brodhead this year > > > __________________________________________________ > Correo Yahoo! > Espacio para todos tus mensajes, antivirus y antispam =A1gratis! > =A1Abr=ED tu cuenta ya! - http://correo.yahoo.com.ar > >


    Message 10


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:40:10 PM PST US
    Subject: Re: New Sky Gypsy
    From: "Jim E" <Ewang207@aol.com>
    Unbelievable! You were right Don. That is amazing. Love the new paint scheme. I remember him saying something about leaving the wire wheels exposed this time. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=192601#192601




    Other Matronics Email List Services

  • Post A New Message
  •   pietenpol-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Pietenpol-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/pietenpol-list
  • Browse Pietenpol-List Digests
  •   http://www.matronics.com/digest/pietenpol-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --