---------------------------------------------------------- Pietenpol-List Digest Archive --- Total Messages Posted Thu 07/31/08: 17 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:48 AM - Re: Corvair hub on Piet. plans (Michael Perez) 2. 07:50 AM - Re: Tail assembly (Michael Silvius) 3. 08:58 AM - Re: Re: Corvair hub on Piet. plans (Bill Church) 4. 09:39 AM - Re: Homemade Turnbuckles (KMHeide, BA, CPO, FAAOP) 5. 10:38 AM - Re: Homemade Turnbuckles (Bill Church) 6. 12:06 PM - Re: Homemade Turnbuckles (KMHeide, BA, CPO, FAAOP) 7. 01:59 PM - Re: Waldo Pepper - One More Time (Phillips, Jack) 8. 02:04 PM - Re: Waldo Pepper - One More Time (Phillips, Jack) 9. 02:56 PM - Re: Homemade Turnbuckles (Bill Church) 10. 03:27 PM - Re: Waldo Pepper - One More Time (AMsafetyC@aol.com) 11. 05:25 PM - Re: Waldo Pepper - One More Time (Gene & Tammy) 12. 06:37 PM - Waldo Pepper (Tim Verthein) 13. 06:51 PM - Re: Waldo Pepper (AMsafetyC@aol.com) 14. 07:15 PM - Homemade Turnbuckles (Oscar Zuniga) 15. 07:42 PM - Re: Riblett install (Pieti Lowell) 16. 07:54 PM - Re: Homemade Turnbuckles (Roman Bukolt) 17. 07:58 PM - Re: Corvair hub on Piet. plans (Dennis Engelkenjohn) ________________________________ Message 1 _____________________________________ Time: 05:48:36 AM PST US From: Michael Perez Subject: Re: Pietenpol-List: Corvair hub on Piet. plans VERY good info there. Thanks. Seems to me this engine deal is going to take the most thought and time to figure out. --- On Wed, 7/30/08, Michael Silvius wrote: From: Michael Silvius Subject: Re: Pietenpol-List: Corvair hub on Piet. plans =EF=BB Michael: =C2- Something to chew on for a while and quite educating. =C2- http://home.hiwaay.net/~langford/corvair/ =C2- http://home.hiwaay.net/~langford/corvair/flexplate/problem.html =C2- http://home.hiwaay.net/~langford/flights/crank2/ =C2- Offered not as a discouragement but this should give you an idea of the kin d of teritory you are geting in to. =C2- Michael in Maine ________________________________ Message 2 _____________________________________ Time: 07:50:07 AM PST US From: "Michael Silvius" Subject: Re: Pietenpol-List: Tail assembly Ken: A short while ago these these photos were posted to the list. I do not remember who they belong to but I saved them in my goodies file. May be a solution. Michael in Maine ----- Original Message ----- From: KMHeide, BA, CPO, FAAOP Members of the list: I am ready to mount my tail section and need some advice. Can anyone advise what type or kind of turnbuckles they are using for the cable connection on the tail section? I have been searching Aircraft Spruce for adjustable turnbuckles but find the price on the high side. Don't get me wrong...."no ten dollar head you get a ten dollar helmet".... guy here. Just wondering the best way to connect the cables with adjustment. What are most of you all using? ________________________________ Message 3 _____________________________________ Time: 08:58:35 AM PST US From: "Bill Church" Subject: RE: Pietenpol-List: Re: Corvair hub on Piet. plans John, As we all (likely) know, the Air Camper was originally designed around a Ford Model A engine, which typically produces 40 HP (with a lot of torque at low RPMs). Many different engines have been attached to the fronts of Air Campers over the years - some say more different powerplants than any other aircraft. After WWII, when small Continentals (50 - 65 HP) came on the scene, many people put them on Pietenpols. In 1967, when B.H. Pietenpol released the supplemental plans for the Air Camper, he included basic details for a lengthened fuselage, for use with the lighter Continental or Corvair engines, as well as motor mounts for both engines. The Corvair that BHP had used was the earlier 80 HP engine, which likely only produced somewhere in the range of 60 HP when used on his plane. Builders today usually use the 95 or 110 HP version of the Corvair, and likely see an actual output of 80 to 100 HP. Over the years, builders have mounted larger engines on their Air Campers, but for the most part, the O-200 (100 HP) is considered the upper limit for this aircraft. Some builders who, by necessity, need more power, due to payload issues (read: body mass) and have opted for engines larger than the O-200, such as the O-235. This engine produces more HP, and will impart more stresses onto the airframe. Anyone considering using such a powerplant would be wise to have the airframe analysed by a qualified person, and reinforced as necessary before strapping themselves in the seat for takeoff. In the UK, the governing bodies regarding homebuilt aircraft are much more strict, and restrictive than in the US. Any change (and they really mean ANY) from the plans must be approved by the LAA. Following is an excerpt from the LAA Type Acceptance Data Sheet (TADS 047), regarding powerplants to be used on the Air Camper: "The most popular engine for the Air Camper in the UK is the Continental C90 or 0-200, without starter or alternator to save weight. The Continental A65 has been used but this results in a degraded climb rate and necessitated a reduction in allowable maximum gross weight, and hence reduced payload. Lycoming 0-235 engines of 115 and 118 BHP has been used on two examples, but use of this heavier, more powerful engine necessitates uprating of the forward fuselage and engine mounting attachment fittings." Note that they state that the forward fuselage and engine attachment fittings must be "uprated". As for explaining about Corvair parts still being manufactured, I think you just did that. Don't know if this reply helps you or not, but that's my take on the situation. Bill C. ________________________________ Message 4 _____________________________________ Time: 09:39:00 AM PST US From: "KMHeide, BA, CPO, FAAOP" Subject: RE: Pietenpol-List: Homemade Turnbuckles Bill, - Have you nailed down the materials (thickness, width, length, rod size, etc ) to manufacture the turnbuckles for the tail section? After seeing the pri ce for the turnbuckles on Aircraft Spruce and others, I think making my own would be a great idea... any assistance? Kenneth M. Heide, BA, CPO, FAAOP - --- On Mon, 3/31/08, Bill Church wrote: From: Bill Church Subject: RE: Pietenpol-List: Homemade Turnbuckles Well, on Saturday, I decided to do a little experimenting with using solid wire vs. cables, and building a sample homemade turnbuckle. - First, the solid wire experimenting: I made a couple of jigs for bending the solid wire from scrap materials. Th e design of the jigs was based on information I have gathered over the last week - thanks to many listers (Santiago, Clif, John and others), and was e asy to build. Since it was all made from scrap, the cost was nothing. I jus t happened to have a bit of .080" galvanized fence wire laying around as we ll. The jig to bend the loop in the end of the wire is pretty straightforwa rd, and worked well. The jig (if you want to call it that) for bending the ferrules was even more straightforward - just a piece of rod, ground down t o approximately the right shape and size, and then driven into a block of h ardwood. It also worked well. I made up a couple of assemblies to test out the jigs, and as expected, the second and third attempts were much better t han the first. I think that after a doing a dozen or so, I would get the te chnique down to a science (or at least obtain consistant results). Overall-I was pretty pleased with the finished product (for an amateur) - looks good, and feels strong. - Second, the homemade turnbuckle: My design for the homemade turnbuckle was based on two things. One was a co uple of low-resolution photos of the turnbuckles used on the Flitzer biplan es. And the other was common sense (more or less) based on size and load ca rrying capacity. I made the ends of the turnbuckle from a couple of strips of 16ga steel (1/2" x 5"). Because this strip was small, it was possible to form by hand, and then squeeze in a vise (with the 3/8" rod in place). The threaded and non-threaded inserts for each end were fabricated from a bit of 3/8"diameter stainless steel rod (1/2" long), on which I ground down a f lat section for the bolt to mate with. The threaded portion of the turnbuck le is a #10-32 allen bolt (hex socket stainless steel machine screw). Like any hex head bolt, the allen bolt only needs to be rotated 1/6 of a turn (o r 60=B0)-in order to position the wrench for the next -"crank", but the allen bolt does not need any clearance around the head for a wrench, since the wrench fits inside the head. However, this is still a bit tight the way I built my prototype, and needs a bit of refinement - maybe 1/2" ro d instead of 3/8". I also need to devise a method to incorporate a safety w ire, to prevent the tension from releasing. I put all the parts together and screwed them to a hunk of 2x4, and tighten ed up the turnbuckle, and it worked! Photos and description have been posted on mykitplane.com: - http://www.mykitplane.com/Planes/buildLogReportDetail.cfm?BuildLogID=1833 &PlaneID=510&FName=Bill&LName=Church&PlaneName=Air%20Camper - Note that all of this work was done in my basic garage workshop, with no sp ecial equipment - just an angle grinder, a hammer, a drill press and a benc h vise. - Before using either of these products (solid wire bracing and homemade turn buckles) I-would suggest doing some physical testing to determine the act ual breaking strength(s) based on the actual materials used. - Bill C. =0A=0A=0A ________________________________ Message 5 _____________________________________ Time: 10:38:05 AM PST US From: "Bill Church" Subject: RE: Pietenpol-List: Homemade Turnbuckles Ken, I kind of got sidetracked away from the homemade turnbuckles for a while, and I've actually been building my tailfeathers. So, the short answer to your question is "No, I haven't". Having said that, here's the long answer. I didn't do any strength calculations, but I have a strong feeling that the turnbuckles as I made them will be sufficient in strength, but I have yet to do some real-world pull testing to see what they can safely handle. Before I do the pull test I wanted to refine the design a bit to make them a bit more user friendly. That way I'll be testing the proper part, not just something similar. I still plan to do it, just not right now. If you need an answer right now, I think just about anyone could make up a set of these in a short period of time, and then do their own testing using a simple apparatus (lever and pivot). When I do get around to revising the design and doing the pull-testing, I'll share the results with the list. If you want more details about how I made the prototype, let me know. Bill C. _____ From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of KMHeide, BA, CPO, FAAOP Sent: Thursday, July 31, 2008 12:37 PM Subject: RE: Pietenpol-List: Homemade Turnbuckles Bill, Have you nailed down the materials (thickness, width, length, rod size, etc) to manufacture the turnbuckles for the tail section? After seeing the price for the turnbuckles on Aircraft Spruce and others, I think making my own would be a great idea... any assistance? Kenneth M. Heide, BA, CPO, FAAOP ________________________________ Message 6 _____________________________________ Time: 12:06:08 PM PST US From: "KMHeide, BA, CPO, FAAOP" Subject: RE: Pietenpol-List: Homemade Turnbuckles Bill, - I am very open to more information as to the manufacturing of these parts. Kenneth M. Heide, BA, CPO, FAAOP - --- On Thu, 7/31/08, Bill Church wrote: From: Bill Church Subject: RE: Pietenpol-List: Homemade Turnbuckles Ken, - I kind of got sidetracked away from the homemade turnbuckles for a while, a nd I've actually been building my tailfeathers. So, the short answer to you r question is "No, I haven't". Having said that, here's the long answer. I didn't do any strength calculations, but I have a strong feeling that the turnbuckles as I made them will be sufficient in strength, but I have yet to do some real-world pull testing to see what they can safely handle. Befo re I do the pull test I wanted-to refine the design a bit to make them a bit more user friendly. That way I'll be testing the proper part, not just something similar. I still plan to do it, just not right now. If you need a n answer right now, I think just about anyone could make up a set of these in a short period of time, and then do their own testing using a simple app aratus (lever and pivot). When I do get around to revising the design and d oing the pull-testing, I'll share the results with the list. If you want more details about how I made the prototype, let me know. - Bill C. From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-lis t-server@matronics.com] On Behalf Of KMHeide, BA, CPO, FAAOP Sent: Thursday, July 31, 2008 12:37 PM Subject: RE: Pietenpol-List: Homemade Turnbuckles Bill, - Have you nailed down the materials (thickness, width, length, rod size, etc ) to manufacture the turnbuckles for the tail section? After seeing the pri ce for the turnbuckles on Aircraft Spruce and others, I think making my own would be a great idea... any assistance? Kenneth M. Heide, BA, CPO, FAAOP - =0A=0A=0A ________________________________ Message 7 _____________________________________ Time: 01:59:11 PM PST US Subject: RE: Pietenpol-List: Waldo Pepper - One More Time From: "Phillips, Jack" Hi Gene, You missed a good time. The grass was green, the mosquitos were plentiful and hungry, and the Pietenpols were in abundance (at least more so than the Hatz Biplanes). Here is a picture of the field: Here is what it looked like from my Pietenpol at 300' AGL: There was good food, and good camaraderie. And lots of Piet builders taking pictures and making notes from every flying Pietenpol on the field (I think there were a total of 14 Piets there): By the way, on the way home I did go by Jackson, TN to visit Mom. Coming out of there Monday morning, Flight Service forecast "a few clouds at 600' ". By the time I got to the Tennessee River at Clifton, this is what I found: Shortly after that picture was taken, it walled in all around me and I was suddenly in full IMC. If I didn't have a Turn & Bank indicator I don't know what I would have done. As it was, I did a 180 and went back to Jackson to wait for it to clear up. Made it back home Tuesday afternoon. In 5 days I put a little over 34 hours on the airplane and flew just over 1900 miles. Maybe next year we can fly up together with Randy Bush. He was there, but without his Pietenpol. If I start working on my wife now, I might be able to get her used to the idea of me flying up again by next July. Jack Phillips NX899JP Raleigh, NC -----Original Message----- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Gene & Tammy Sent: Wednesday, July 30, 2008 7:24 PM Subject: Re: Pietenpol-List: Waldo Pepper - One More Time Jack, are you going to let us know how your trip went and what I missed out on??? Gene in Tennessee ----- Original Message ----- From: "Phillips, Jack" Sent: Wednesday, July 30, 2008 7:44 AM Subject: RE: Pietenpol-List: Waldo Pepper - One More Time > > > The Great Waldo Pepper is available through Amazon. New or Used. No > need to risk copyright infingement. > > Jack Phillips > NX899JP > Raleigh, NC > > -----Original Message----- > From: owner-pietenpol-list-server@matronics.com > [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Tim > Verthein > Sent: Saturday, July 26, 2008 9:28 AM > To: pietenpol-list@matronics.com > Subject: Pietenpol-List: Waldo Pepper - One More Time > > > > I haven't seen this movie since it was new in the theatre probably 30 > years ago. My quest to find a copy turned up nothing locally. > > Then, it turns out my Mom had it on VHS. She actually wrote an article > about it 25 years or so ago. Since my folks don't even HAVE a VHS > player anymore, she gave it to me. > > I have dubbed it to DVD. If there is anyone on the list who hasn't seen > the movie who would like to I sell send a DVD to anyone who wants one > for no charge at all. Just don't expect any fancy packaging. > > And yes, to those of you with scruples who worry about such things I'm > sure this is some horrid copyright violation. but since it's not > available for purchase new, used copies are hard to come by (and often > expensive) and I really doubt anyone at the studio, or any of the > performers gets much for it when a used copy changes hands at some > insane collector price anyway, and heck, I'm offering them FREE, I'm not > gonna worry about it. If Mr. Redford would like to call me and ask for > his share, more power to him. > > So, that's the offer. Probably best to e-mail me of list if you'd like > one: > > minoxphotographer@yahoo.com > > Tim in Bovey > > > _________________________________________________ > > or otherwise private information. If you have received it in error, please > notify the sender > > Dansk - Deutsch - Espanol - Francais - Italiano - Japanese - Nederlands - > Norsk - Portuguese > > > -- > Checked by AVG. > 4:05 PM > > This message is for the designated recipient only and may contain privilege d, proprietary or otherwise private information. If you have received it in error, please notify the sender immediately and delete the original. Any o ther use of the email by you is prohibited. Dansk - Deutsch - Espanol - Fr ancais - Italiano - Japanese - Nederlands - Norsk - Portuguese - Svenska: w ww.cardinalhealth.com/legal/email ________________________________ Message 8 _____________________________________ Time: 02:04:59 PM PST US Subject: RE: Pietenpol-List: Waldo Pepper - One More Time From: "Phillips, Jack" Hmmm... that didn't work. Matronics must have stripped the pictures I sent. I'll try again. Jack _____ From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Phillips, Jack Sent: Thursday, July 31, 2008 4:56 PM Subject: RE: Pietenpol-List: Waldo Pepper - One More Time Hi Gene, You missed a good time. The grass was green, the mosquitos were plentiful and hungry, and the Pietenpols were in abundance (at least more so than the Hatz Biplanes). Here is a picture of the field: Here is what it looked like from my Pietenpol at 300' AGL: There was good food, and good camaraderie. And lots of Piet builders taking pictures and making notes from every flying Pietenpol on the field (I think there were a total of 14 Piets there): By the way, on the way home I did go by Jackson, TN to visit Mom. Coming out of there Monday morning, Flight Service forecast "a few clouds at 600' ". By the time I got to the Tennessee River at Clifton, this is what I found: Shortly after that picture was taken, it walled in all around me and I was suddenly in full IMC. If I didn't have a Turn & Bank indicator I don't know what I would have done. As it was, I did a 180 and went back to Jackson to wait for it to clear up. Made it back home Tuesday afternoon. In 5 days I put a little over 34 hours on the airplane and flew just over 1900 miles. Maybe next year we can fly up together with Randy Bush. He was there, but without his Pietenpol. If I start working on my wife now, I might be able to get her used to the idea of me flying up again by next July. Jack Phillips NX899JP Raleigh, NC -----Original Message----- From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Gene & Tammy Sent: Wednesday, July 30, 2008 7:24 PM Subject: Re: Pietenpol-List: Waldo Pepper - One More Time Jack, are you going to let us know how your trip went and what I missed out on??? Gene in Tennessee ----- Original Message ----- From: "Phillips, Jack" Sent: Wednesday, July 30, 2008 7:44 AM Subject: RE: Pietenpol-List: Waldo Pepper - One More Time > > > The Great Waldo Pepper is available through Amazon. New or Used. No > need to risk copyright infingement. > > Jack Phillips > NX899JP > Raleigh, NC > > -----Original Message----- > From: owner-pietenpol-list-server@matronics.com > [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Tim > Verthein > Sent: Saturday, July 26, 2008 9:28 AM > To: pietenpol-list@matronics.com > Subject: Pietenpol-List: Waldo Pepper - One More Time > > > > I haven't seen this movie since it was new in the theatre probably 30 > years ago. My quest to find a copy turned up nothing locally. > > Then, it turns out my Mom had it on VHS. She actually wrote an article > about it 25 years or so ago. Since my folks don't even HAVE a VHS > player anymore, she gave it to me. > > I have dubbed it to DVD. If there is anyone on the list who hasn't seen > the movie who would like to I sell send a DVD to anyone who wants one > for no charge at all. Just don't expect any fancy packaging. > > And yes, to those of you with scruples who worry about such things I'm > sure this is some horrid copyright violation. but since it's not > available for purchase new, used copies are hard to come by (and often > expensive) and I really doubt anyone at the studio, or any of the > performers gets much for it when a used copy changes hands at some > insane collector price anyway, and heck, I'm offering them FREE, I'm not > gonna worry about it. If Mr. Redford would like to call me and ask for > his share, more power to him. > > So, that's the offer. Probably best to e-mail me of list if you'd like > one: > > minoxphotographer@yahoo.com > > Tim in Bovey > > > > > > > > > > _________________________________________________ > > or otherwise private information. If you have received it in error, please > notify the sender > > Dansk - Deutsch - Espanol - Francais - Italiano - Japanese - Nederlands - > Norsk - Portuguese > > > > > > > > > -- > Checked by AVG. > 4:05 PM > > ====== - The Pietenpol-List Email Forum - he Matronics List Features Navigator to browse any List utilities such as List Un/Subscription, ve Search & Download, 7-Day Browse, Chat, FAQ, share, and much much more: --> http://www.matronics.com/Navigator?Pietenpol-List ====== - MATRONICS WEB FORUMS - great content also available via the Web Forums! --> http://forums.matronics.com ====== - List Contribution Web Site - Thank you for your generous support! -Matt Dralle, List Admin. --> http://www.matronics.com/contribution ====== This message is for the designated recipient only and may contain privileged, proprietary or otherwise private information. If you have received it in error, please notify the sender immediately and delete Deutsch - Espanol - Francais - Italiano - Japanese - Nederlands - Norsk This message is for the designated recipient only and may contain privilege d, proprietary or otherwise private information. If you have received it in error, please notify the sender immediately and delete the original. Any o ther use of the email by you is prohibited. Dansk - Deutsch - Espanol - Fr ancais - Italiano - Japanese - Nederlands - Norsk - Portuguese - Svenska: w ww.cardinalhealth.com/legal/email ________________________________ Message 9 _____________________________________ Time: 02:56:06 PM PST US From: "Bill Church" Subject: RE: Pietenpol-List: Homemade Turnbuckles Ken, Let me see what I can put together for you. Bill _____ From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of KMHeide, BA, CPO, FAAOP Sent: Thursday, July 31, 2008 3:03 PM Subject: RE: Pietenpol-List: Homemade Turnbuckles Bill, I am very open to more information as to the manufacturing of these parts. Kenneth M. Heide, BA, CPO, FAAOP ________________________________ Message 10 ____________________________________ Time: 03:27:28 PM PST US From: AMsafetyC@aol.com Subject: Re: Pietenpol-List: Waldo Pepper - One More Time Son....Son.... I'd be obliged if you propped me son. You're a good looser a d I like good losers, I bet you've had plenty of practice In a message dated 7/31/2008 5:06:02 P.M. Eastern Daylight Time, Jack.Phillips@cardinalhealth.com writes: Hmmm that didn=99t work. Matronics must have stripped the p ictures I sent. I=99ll try again. Jack ____________________________________ From: owner-pietenpol-list-server@matronics.com [mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Phillips, Ja ck Sent: Thursday, July 31, 2008 4:56 PM Subject: RE: Pietenpol-List: Waldo Pepper - One More Time Hi Gene, You missed a good time. The grass was green, the mosquitos were plentiful and hungry, and the Pietenpols were in abundance (at least more so than the Hatz Biplanes). Here is a picture of the field: Here is what it looked like from my Pietenpol at 300' AGL: There was good food, and good camaraderie. And lots of Piet builders takin g pictures and making notes from every flying Pietenpol on the field (I think there were a total of 14 Piets there): By the way, on the way home I did go by Jackson, TN to visit Mom. Coming out of there Monday morning, Flight Service forecast "a few clouds at 600' ". By the time I got to the Tennessee River at Clifton, this is what I found : Shortly after that picture was taken, it walled in all around me and I was suddenly in full IMC. If I didn't have a Turn & Bank indicator I don't kno w what I would have done. As it was, I did a 180 and went back to Jackson to wait for it to clear up. Made it back home Tuesday afternoon. In 5 days I put a little over 34 hour s on the airplane and flew just over 1900 miles. Maybe next year we can fly up together with Randy Bush. He was there, but without his Pietenpol. If I start working on my wife now, I might be able to get her used to the idea of me flying up again by next July. Jack Phillips NX899JP Raleigh, NC -----Original Message----- From: owner-pietenpol-list-server@matronics.com [_mailto:owner-pietenpol-list-server@matronics.com_ (mailto:owner-pietenpol- list-server@matronics.com) ] On Behalf Of Gene & Tammy Sent: Wednesday, July 30, 2008 7:24 PM Subject: Re: Pietenpol-List: Waldo Pepper - One More Time --> Pietenpol-List message posted by: "Gene & Tammy" Jack, are you going to let us know how your trip went and what I missed out on??? Gene in Tennessee ----- Original Message ----- From: "Phillips, Jack" Sent: Wednesday, July 30, 2008 7:44 AM Subject: RE: Pietenpol-List: Waldo Pepper - One More Time > --> Pietenpol-List message posted by: "Phillips, Jack" > > > The Great Waldo Pepper is available through Amazon. New or Used. No > need to risk copyright infingement. > > Jack Phillips > NX899JP > Raleigh, NC > > -----Original Message----- > From: owner-pietenpol-list-server@matronics.com > [_mailto:owner-pietenpol-list-server@matronics.com_ (mailto:owner-pietenpol-list-server@matronics.com) ] On Behalf Of Tim > Verthein > Sent: Saturday, July 26, 2008 9:28 AM > To: pietenpol-list@matronics.com > Subject: Pietenpol-List: Waldo Pepper - One More Time > > --> Pietenpol-List message posted by: Tim Verthein > > > I haven't seen this movie since it was new in the theatre probably 30 > years ago. My quest to find a copy turned up nothing locally. > > Then, it turns out my Mom had it on VHS. She actually wrote an article > about it 25 years or so ago. Since my folks don't even HAVE a VHS > player anymore, she gave it to me. > > I have dubbed it to DVD. If there is anyone on the list who hasn't seen > the movie who would like to I sell send a DVD to anyone who wants one > for no charge at all. Just don't expect any fancy packaging. > > And yes, to those of you with scruples who worry about such things I'm > sure this is some horrid copyright violation. but since it's not > available for purchase new, used copies are hard to come by (and often > expensive) and I really doubt anyone at the studio, or any of the > performers gets much for it when a used copy changes hands at some > insane collector price anyway, and heck, I'm offering them FREE, I'm not > gonna worry about it. If Mr. Redford would like to call me and ask for > his share, more power to him. > > So, that's the offer. Probably best to e-mail me of list if you'd like > one: > > minoxphotographer@yahoo.com > > Tim in Bovey > > > > > > > > > > _________________________________________________ > > or otherwise private information. If you have received it in error, pleas e > notify the sender > > Dansk - Deutsch - Espanol - Francais - Italiano - Japanese - Nederlands - > Norsk - Portuguese > > > > > > > > > -- > Checked by AVG. > 4:05 PM > > ======= - The Pietenpol-List Email Forum - he Matronics List Features Navigator to browse any List utilities such as List Un/Subscription, ve Search & Download, 7-Day Browse, Chat, FAQ, share, and much much more: --> _http://www.matronics.com/Navigator?Pietenpol-List_ (http://www.matronics.com/Navigator?Pietenpol-List) ======= - MATRONICS WEB FORUMS - great content also available via the Web Forums! --> _http://forums.matronics.com_ (http://forums.matronics.com/) ======= - List Contribution Web Site - Thank you for your generous support! -Matt Dralle, List Admin. --> _http://www.matronics.com/contribution_ (http://www.matronics.com/contribution) ======= , proprietary or otherwise private information. If you have received it in error, please notify the sender immediately and delete the original. Any oth er use of the email by you is prohibited. Dansk - Deutsch - Espanol - Francais - Italiano - Japanese - Nederlands - Norsk - Portuguese - Svenska: http://www.matronics.com/contribution , proprietary or otherwise private information. If you have received it in error, please notify the sender immediately and delete the original. Any oth er use of the email by you is prohibited. Dansk - Deutsch - Espanol - Francais - Italiano - Japanese - Nederlands - Norsk - Portuguese - Svenska: (http://www.matronics.com/Navigator?Pietenpol-List) (http://www.matronics.com/contribution) **************Get fantasy football with free live scoring. Sign up for FanHouse Fantasy Football today. (http://www.fanhouse.com/fantasyaffair?ncid=aolspr00050000000020) ________________________________ Message 11 ____________________________________ Time: 05:25:12 PM PST US From: "Gene & Tammy" Subject: Re: Pietenpol-List: Waldo Pepper - One More Time RE: Pietenpol-List: Waldo Pepper - One More TimeSorry I missed it. Hope to be there next year. Your photos still have not come thru. Gene ________________________________ Message 12 ____________________________________ Time: 06:37:32 PM PST US From: Tim Verthein Subject: Pietenpol-List: Waldo Pepper Yeeah, if you're loaded :) Used VHS copies, some up to $50.00, some used bootleg DVD's, and some expensive PAL format tapes. Note none of the actual sources are new off the shelf Amazon stock. For those who might think a Wynne manual is expensive, a $40 movie certainly would be! For those of you on my "list" to get one, gonna be about a week before they start going out. So be on the alert! I just watched it again -- GREAt movie. Tim in Bovey ________________________________ Message 13 ____________________________________ Time: 06:51:19 PM PST US From: AMsafetyC@aol.com Subject: Re: Pietenpol-List: Waldo Pepper In a message dated 7/31/2008 9:38:45 P.M. Eastern Daylight Time, minoxphotographer@yahoo.com writes: For those who might think a Wynne manual is expensive, a $40 movie certainly would be! I doubt you'll ever hear anyone quote lines for the head torque pattern or timing gear sections of the book What are you doing, I'm borrowing your plane son, its an inferior model but it ill do, Dillhoffer promised me a job, you 're not going anywhere with my plane... You're both starving why not help each other What would we do? your plane is down for repair and my engine is giving me fits..... Actually I have some ideas on the subject. Lets get this straight, you're just flying, she's just driving, I'm the one doing a great stunt, that why you're getting all the glory son John **************Get fantasy football with free live scoring. Sign up for FanHouse Fantasy Football today. (http://www.fanhouse.com/fantasyaffair?ncid=aolspr00050000000020) ________________________________ Message 14 ____________________________________ Time: 07:15:57 PM PST US From: Oscar Zuniga Subject: Pietenpol-List: Homemade Turnbuckles I got to thinking about "hardware store" turnbuckles as a possible alternative to AN/MS hardware and paged over to McMaster-Carr to snoop. Found some surprises. For example, let's take the typical 1/8" 7x19 aircraft cable. It's rated at 2000 lbs. strength. For that, let's pick an AN/MS turnbuckle with AN4 (1/4") threads, an eye on one end and a fork on the other, roughly 4-1/2" long. It is rated something a little over 2000 lbs. so it's a good match for that cable. Searching "the hardware store", we start with open-body aluminum "screen door" turnbuckles with 1/4" threaded eyes and find that it might be rated a couple of hundred pounds, obviously due to the aluminum body and the minimal number of threads on the eyes that engage the body. Move on to galvanized steel and the strength improves to a couple of hundred pounds, still very affordable. Now on to the better stuff and we find stainless steel turnbuckles, which are available in both open and closed body and seem to engage maybe twice as many threads but are rated no more than 800 lbs. and also have a caution that the working load should not be exceeded. Can you say "fails rather sharply"? The cost of hardware store (or nautical/marine, I found) is a lot more attractive but the strength is just not there without really getting heavy. Is the aircraft hardware 'overkill' for the working loads? I don't know. I have not run any sort of analysis to determine the aerodynamic loadings on any of them, but when we go from 2000 lbs. rating to a couple of hundred, someone had better do some testing. Same goes for home-made tensioners. I'm all in favor of better mousetraps, but let's test these things against their working stresses before we substitute. Those stainless turnbuckles look great to me and are about 1/3 the price of AN/MS hardware, but I would have to assure myself that they could handle the flight loads with at least a 2x factor of safety because my skinny a$$ is worth more than a $10 turnbuckle. Oscar Zuniga Air Camper NX41CC San Antonio, TX mailto: taildrags@hotmail.com website at http://www.flysquirrel.net ________________________________ Message 15 ____________________________________ Time: 07:42:10 PM PST US Subject: Pietenpol-List: Re: Riblett install From: "Pieti Lowell" CG range of the Riblett is very close to the Piet, with a lighter engine up front I add a slight bungee pull on the forward side of the stick, when the Werner went on a little back pressure was added. except when full power was applyed on the Werner a forward pressure was applyed to keep from climbing over 2000 FPM. I kept the spar the same as Piet as all the fittings don't require a change. The cord line is higher on the 612, I suspect the angle of incident can be reduced. I have flown with 5 different engines on the same Piet and do-not change anything, just to test engines, Now that I am trying the 612 I retry engines . Don't be surprised to see a great improvement in flight, when using the 612. Pieti Lowell Read this topic online here: http://forums.matronics.com/viewtopic.php?p=195943#195943 ________________________________ Message 16 ____________________________________ Time: 07:54:29 PM PST US From: Roman Bukolt Subject: Re: Pietenpol-List: Homemade Turnbuckles Just back from EAA B & B Specialties is where I buy all my turnbuckles, all aircraft quality and with any type ends you want, the whole assembly costs about $10.00 each. Their prices are as little as 1/2 the price others in the same Fly Market are charging and their prices are the same all yr. around, not "Show Specials". They don't have a catalog but get part numbers out of AC/S, call them, order by part number and you'll get the best price anywhere. (913) 884-5930 I can't even begin to imagine anyone building a Piet, trying to save a couple bucks by buying hardware store stuff that they are going to trust their LIFE with?? Stick with aircraft quality but save by buying from reliable sources like B&B Specialties. Amen On Jul 31, 2008, at 9:13 PM, Oscar Zuniga wrote: > > > > > I got to thinking about "hardware store" turnbuckles as a possible > alternative to AN/MS hardware and paged over to McMaster-Carr to > snoop. Found some surprises. For example, let's take the typical > 1/8" 7x19 aircraft cable. It's rated at 2000 lbs. strength. For > that, let's pick an AN/MS turnbuckle with AN4 (1/4") threads, an eye > on one end and a fork on the other, roughly 4-1/2" long. It is > rated something a little over 2000 lbs. so it's a good match for > that cable. > > Searching "the hardware store", we start with open-body aluminum > "screen door" turnbuckles with 1/4" threaded eyes and find that it > might be rated a couple of hundred pounds, obviously due to the > aluminum body and the minimal number of threads on the eyes that > engage the body. Move on to galvanized steel and the strength > improves to a couple of hundred pounds, still very affordable. Now > on to the better stuff and we find stainless steel turnbuckles, > which are available in both open and closed body and seem to engage > maybe twice as many threads but are rated no more than 800 lbs. and > also have a caution that the working load should not be exceeded. > Can you say "fails rather sharply"? > > The cost of hardware store (or nautical/marine, I found) is a lot > more attractive but the strength is just not there without really > getting heavy. Is the aircraft hardware 'overkill' for the working > loads? I don't know. I have not run any sort of analysis to > determine the aerodynamic loadings on any of them, but when we go > from 2000 lbs. rating to a couple of hundred, someone had better do > some testing. Same goes for home-made tensioners. > > I'm all in favor of better mousetraps, but let's test these things > against their working stresses before we substitute. Those > stainless turnbuckles look great to me and are about 1/3 the price > of AN/MS hardware, but I would have to assure myself that they could > handle the flight loads with at least a 2x factor of safety because > my skinny a$$ is worth more than a $10 turnbuckle. > > Oscar Zuniga > Air Camper NX41CC > San Antonio, TX > mailto: taildrags@hotmail.com > website at http://www.flysquirrel.net > > ________________________________ Message 17 ____________________________________ Time: 07:58:51 PM PST US From: "Dennis Engelkenjohn" Subject: Re: Pietenpol-List: Corvair hub on Piet. plans Michael: I have an older edition of WW's that had the drawing for the hub. There were some other drawings also, but I have filed them away and am unable to put my hands on them right now. It was always his thing that if you wanted to make your own he would go out of his way to assist you and many did and do now. If you are a person who doesn't have access to a machine shop or the time, he will sell you the parts, but he at least gives you the choice and nudges you in the direction of doing things yourself if you are wanting to try but not quite sure. Its not just the manual you are buying, but the help to the point of holding your hand if you need it. You probably won't, but it is good to know you have a plan B every now and then. dennis ----- Original Message ----- From: Michael Perez To: pietenpol-list@matronics.com Sent: Wednesday, July 30, 2008 6:55 AM Subject: Re: Pietenpol-List: Corvair hub on Piet. plans Thanks Oscar, a very well written responce. IF I decide to do the Corvair, I will have to get these mentioned books. I see they are quite pricy, but what others are available? Machining either hub won't be an issue, I just wanted to get the best suited part that I could make that has already been proven. (Rather then make up my own fron scratch.) Mine will more then likely be 6061-T6 aluminum. Nothing has been decided...just gathering intel. and you have been of great help. --- On Tue, 7/29/08, Oscar Zuniga wrote: From: Oscar Zuniga Subject: Pietenpol-List: Corvair hub on Piet. plans To: "Pietenpol List" Date: Tuesday, July 29, 2008, 10:39 PM Mike; Doesn't look to me like anybody actually answered your question about the differences between the two hubs (Pietenpol and Wynne) for the Corvair conversion, so I'll throw in my two cents' worth and see if I can add anything. I have the Pietenpol drawings and the hub sheets are dated November of 1972. The material indicated for the hub is "aluminum casting". The design pioneered the use of a "safety shaft" through the center of the hub into a threaded 3/4" deep bore in the center of the crankshaft end (nose). The safety shaft is called out to be a 5" long, 1" dia. 4130 or 4140 steel rod, or 1" dia. by .250" wall 4130 steel tube, threaded 18 threads to the inch. The hub is mounted to the crankshaft flange using standard Chevy 11/32" capscrews, 1" long. This requires that the holes in the hub be bored very deep into it and that a long, thinwall socket be used to tighten them. The flange itself has a standard bolt pattern and is .438" thick at the prop flange. Overall length is given as 2.875". I say all of this to contrast this hub to the Wynne hub, which is quite a bit beefier but is obviously an adaptation and improvement on Mr. Pietenpol's hub. It is 3.5" long with a 1.1" thick prop flange, and is machined from 2024 aluminum, but William says it could be made from 6061. William's design uses a safety shaft that is 6" long because the hub is a bit heavier, longer, and stouter- and the safety shaft threads 1" into the crank nose rather than 3/4" as in the Pietenpol. The threads are 14 threads per inch (coarser than the Pietenpol). While the Pietenpol hub body is slightly tapered, the Wynne design is straight, again making it beefier. William's preferred method of mounting to the crank flange is through the use of what William calls "hybrid studs", which are threaded with the Chevy 11/32" on one end and a more standard 3/8-24 thread on the nut end that holds the hub to the crank flange. Here's what William says about the Pietenpol hub in his manual, of which I have three different editions dating back more than 10 years: "This method was pioneered by Bernie [sic] Pietenpol in the early 1960s. Although I know of no failures of Bernie's way of doing it, my method is a little different and uses different materials, but the concept is the same." He also says, "The Pietenpol method is brought up for technical reference only. If you are building an exact replica of Bernie's engine, his son Don is the best source of information on it. Years ago, a number of cast aluminum hubs were made to Bernie's drawings. Some of these are still floating around for sale. These are light duty units suited only to the modest flying done by Pietenpols.". My take-away: make your hub using the Pietenpol or the Wynne drawings, but ALWAYS use a safety shaft and ALWAYS use at least 6061 aluminum, NOT any cast material. To my non-machinist's eye, the two hubs require about the same amount of machine work to produce but the Wynne hub has no tapers to cut and is stronger in some important areas, and is a little less than an inch or so longer. Oscar Zuniga Air Camper NX41CC San Antonio, TX mailto: taildrags@hotmail.com website at http://www.flysquirrel.net 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message pietenpol-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Pietenpol-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/pietenpol-list Browse Digests http://www.matronics.com/digest/pietenpol-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.