Pietenpol-List Digest Archive

Fri 09/05/08


Total Messages Posted: 4



Today's Message Index:
----------------------
 
     1. 10:47 AM - Old GN-1 old drawings (John and Lori)
     2. 01:40 PM - Re: Old GN-1 old drawings (Tim Willis)
     3. 01:41 PM - Re: Old GN-1 old drawings (H RULE)
     4. 01:48 PM - Re: Old GN-1 old drawings (H RULE)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:47:43 AM PST US
    From: "John and Lori" <jonlor@btc-bci.com>
    Subject: Old GN-1 old drawings
    Hello everyone, I am new to the list as well as building. Recently I purchased GN-1 drawings that were thought to be complete. After their arrival, I found that pages 15 and 16 were missing. These contain one half of the full size wing rib pattern. A fellow subscriber to the list has helped with page 15, but he could not come up with page 16. I would like to complete these drawings with a copy of an original page that includes the trailing edge; however, a full size wing rib print for a GN-1 of any type for building would be appreciated. My plans are dated July 20, 1987. The page 15 I received was not an exact match, but was close enough to work. The good part so far is that the guy who sold the drawings to me was honest and sent me back the check and we're working out the price pending on the outcome of my search. This seems to be the most active Pietenpol forum that I've found so far and have been enjoying reading the thread. John Thompson Allegan, Michigan I would be happy to take care of expenses and many thanks


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 01:40:58 PM PST US
    From: Tim Willis <timothywillis@earthlink.net>
    Subject: Re: Old GN-1 old drawings
    John, I have a copy of page 16. It may not be to the same scale or fit with your page 15, since it is likely "a copy of a copy of a...." However, give me your physical address and I will send you a copy, no charge. This is because the Gregas no longer sell the stuff. You can tape them together and smoothe the curves to fit. More importantly, you can see whatever Grega was doing differently about spar distances and such. I can tell you in general, regarding shape-- that the nose and upper front part of the airfoil(p.14)are the parts markedly different from BP's airfoil. The lower side of the wing is virtually the same as BP's, too, with the reverse camber and all that. Tim in central TX do not archive -----Original Message----- >From: John and Lori <jonlor@btc-bci.com> >Sent: Sep 5, 2008 12:46 PM >To: pietenpol-list@matronics.com >Subject: Pietenpol-List: Old GN-1 old drawings > >Hello everyone, > > I am new to the list as well as building. Recently I purchased GN-1 >drawings that were thought to be complete. After their arrival, I found >that pages 15 and 16 were missing. These contain one half of the full size >wing rib pattern. A fellow subscriber to the list has helped with page 15, >but he could not come up with page 16. I would like to complete these >drawings with a copy of an original page that includes the trailing edge; >however, a full size wing rib print for a GN-1 of any type for building >would be appreciated. My plans are dated July 20, 1987. The page 15 I >received was not an exact match, but was close enough to work. The good >part so far is that the guy who sold the drawings to me was honest and sent >me back the check and we're working out the price pending on the outcome of >my search. This seems to be the most active Pietenpol forum that I've found >so far and have been enjoying reading the thread. > > > >John Thompson > >Allegan, Michigan > > > >I would be happy to take care of expenses and many thanks >


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 01:41:49 PM PST US
    From: H RULE <harvey.rule@rogers.com>
    Subject: Re: Old GN-1 old drawings


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 01:48:04 PM PST US
    From: H RULE <harvey.rule@rogers.com>
    Subject: Re: Old GN-1 old drawings
    Geeeze this pic has got to go through.It's the smallest I can make it. I've tried five times now to get this to you. Payment is one beer when I see you on the circuit in your GN-1 Aircamper.




    Other Matronics Email List Services

  • Post A New Message
  •   pietenpol-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Pietenpol-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/pietenpol-list
  • Browse Pietenpol-List Digests
  •   http://www.matronics.com/digest/pietenpol-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --