----------------------------------------------------------
                           Pietenpol-List Digest Archive
                                      ---
                     Total Messages Posted Tue 10/07/08: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 10:34 AM - Re: elevator cables: in good company  (Bill Church)
     2. 12:06 PM - Re: Email alteration  (walt)
     3. 06:46 PM - FW: Re Drilling bolt holes in wood  (Graham & Robin Hewitt)
 
 
 
________________________________  Message 1  _____________________________________


Time: 10:34:26 AM PST US
Subject: Pietenpol-List: Re: elevator cables: in good company
From: "Bill Church" <billspiet@sympatico.ca>


Here's a Pietenpol with those roller pulleys installed. (just for those that would
like to know what that would look like).


http://www.mykitplane.com/Planes/photoDisplay.cfm?PhotoName=Brussels%202008_078.JPG&PhotoID=3953

Bill C.


Read this topic online here:

http://forums.matronics.com/viewtopic.php?p 7788#207788


________________________________  Message 2  _____________________________________


Time: 12:06:58 PM PST US
From: "walt" <waltdak@verizon.net>
Subject: Re: Pietenpol-List: Email alteration


recieved a blank page

do not archive

walt evans
NX140DL


----- Original Message ----- 
From: "clem" <clam@snap.net.nz>
Sent: Tuesday, October 07, 2008 2:42 AM
Subject: Pietenpol-List: Email alteration


> 
> 
>


________________________________  Message 3  _____________________________________


Time: 06:46:04 PM PST US
From: "Graham & Robin Hewitt" <grhewitt@globaldial.com>
Subject: Pietenpol-List: FW: Re Drilling bolt holes in wood


Hi all,
 re discussion on the strength of bolts through longerons for cabane
fittings, 

for what it is worth an old aircraft wood worker friend has advised me
to run a liquid type glue thru all holes, wait for it to cure, then
ream 
I used West Systems two part epoxy 

he explained that the glue penetrates the wood fibres & makes every
thing much stonger.

The plans I am using are from the PFA in England & they reccommend using
tufnol bushes for all holes for lift stut fittings thru the spars & also
for all fittings for engine mount to front of fuse Tufnol Rod can be
found from a supplier in the UK. Not expensive!!

Talk to Gavin Davis   email  shop@davis-plast.co.uk

Web site for Tufnol  www.tufnol.co.uk

keep building

Graham Hewitt

 

-------------------------------------------------------------------------------------
                       Other Matronics Email List Services
-------------------------------------------------------------------------------------
Post A New Message               pietenpol-list@matronics.com
UN/SUBSCRIBE                     http://www.matronics.com/subscription
List FAQ                         http://www.matronics.com/FAQ/Pietenpol-List.htm
Web Forum Interface To Lists     http://forums.matronics.com
Matronics List Wiki              http://wiki.matronics.com
Full Archive Search Engine       http://www.matronics.com/search
7-Day List Browse                http://www.matronics.com/browse/pietenpol-list
Browse Digests                   http://www.matronics.com/digest/pietenpol-list
Browse Other Lists               http://www.matronics.com/browse
Live Online Chat!                http://www.matronics.com/chat
Archive Downloading              http://www.matronics.com/archives
Photo Share                      http://www.matronics.com/photoshare
Other Email Lists                http://www.matronics.com/emaillists
Contributions                    http://www.matronics.com/contribution
-------------------------------------------------------------------------------------

These Email List Services are sponsored solely by Matronics and through the 
generous Contributions of its members.