Today's Message Index:
----------------------
1. 04:40 AM - Re: baffles (H RULE)
2. 04:42 AM - Re: baffles (H RULE)
3. 05:42 AM - oil pres. and temp. (RBush96589@aol.com)
4. 08:46 AM - Re: oil pres. and temp. (H RULE)
5. 10:40 AM - finished product (RBush96589@aol.com)
6. 10:44 AM - Re: finished product (RAMPEYBOY@aol.com)
7. 11:20 AM - Corvair College # 13 (Brady)
8. 12:08 PM - Re: finished product (H RULE)
9. 05:11 PM - Re: Corvair College # 13 (Michael Groah)
10. 05:33 PM - Re: Corvair College # 13 (Gary Boothe)
11. 05:33 PM - Re: Corvair College # 13 (Ernie Moreno)
12. 06:19 PM - Re: Corvair College # 13 (Rick Holland)
13. 08:44 PM - Re: Re: Corvair College # 13 (Jim)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
nice workmanship;can't wait to see the finished product.=0A=0A=0Ado not arc
hive=0A=0A=0A=0A=0A________________________________=0AFrom: "RBush96589@aol
.com" <RBush96589@aol.com>=0ATo: pietenpol-list@matronics.com=0ASent: Monda
y, January 5, 2009 11:39:38 PM=0ASubject: Pietenpol-List: baffles=0A=0AHey
Rick,=0A-- yes I ran the plug wires from the inside through a hole with
a grommet .I can not find a good close up picture but if you look closely
at this one you can see the plug wires and the plate I was talking about.
=0A=0A=0A=0A=0A=0A=0A________________________________=0ANew year...new news
. Be taolcom00000026">headlines.
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Yes if you keep blowing the picture up you can see it.I like how you did yo
ur eyebrows;very simple,not complicated.I think when mine get broken to the
point where I need to replace and that won't be long,I'm going to do mine
the same way you did yours.=0A=0A=0A=0A=0A________________________________
=0AFrom: "RBush96589@aol.com" <RBush96589@aol.com>=0ATo: pietenpol-list@mat
ronics.com=0ASent: Monday, January 5, 2009 11:39:38 PM=0ASubject: Pietenpol
-List: baffles=0A=0AHey Rick,=0A-- yes I ran the plug wires from the in
side through a hole with a grommet .I can not find a good close up picture
but if you look closely at this one you can see the plug wires and the plat
e I was talking about.=0A=0A=0A=0A=0A=0A=0A________________________________
=0ANew year...new news. Be taolcom00000026">headlines.
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | oil pres. and temp. |
Hi John,
Good to hear from you.thanks for the compliment,and yes I plan own being
there at Brodhead with it this year. I used the remote oil filter mount that
William recommends ,it has ports on it for oil pres. and temp. As for the
gauges they are both autometer from summit racing.
And thanks to Harvey also for the kind words.The plane was finished
December 07. I have over 70 hrs on it now.
do not archive
Randy Bush
**************New year...new news. Be the first to know what is making
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: oil pres. and temp. |
I'd like to see a picture of the finished product when you get time;thanks.
=0A=0A=0Ado not archive=0A=0A=0A=0A=0A________________________________=0AFr
om: "RBush96589@aol.com" <RBush96589@aol.com>=0ATo: pietenpol-list@matronic
s.com=0ASent: Tuesday, January 6, 2009 8:41:36 AM=0ASubject: Pietenpol-List
: oil pres. and temp.=0A=0AHi John,=0A--- Good to hear from you.thank
s for the compliment,and yes I plan own being there at Brodhead with it thi
s year. I used the remote oil filter mount that William recommends ,it has
ports on it for oil pres. and temp. As for the gauges they are both automet
er from summit racing.=0A-------- And thanks to Harvey also
for the kind words.The plane was finished December 07. I have over 70 hrs
on it now.=0Ado not archive=0A---------------
-------------------------
-------------------------
-------------------------
-------------------------
-------- Randy Bush=0A=0A=0A=0A=0A_________________________
===============
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | finished product |
Harvey ,
here is a picture of the finished product. I would send more but out
here in the country i am still on dial up and it takes forever to send a picture.
do not archive
Randy Bush
**************New year...new news. Be the first to know what is making
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: finished product |
Wow, beautiful Randy! Love it!
Boyce
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Corvair College # 13 |
Corvair College # 13 is now less than 2 weeks away!
For those of you that are in the Washington area, who are flying down commercial
and are some what less than interested in trying to "carry on" your engine &
parts; I am still willing to bring them down with me.
There is no charge for this service, I am going that way anyway. :)
I only say that because someone asked. :)
you must however bring it to me before hand :)
You can call me @ 1-866-606-4152
Or see my website for an address
I will be busy in the shop so If I don't answer just leave a message & I will return
your call during a break.
--------
Brady McCormick
Poulsbo, WA
www.magnificentmachine.com
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=223181#223181
Message 8
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: finished product |
Really great workmanship.Clean lines and I really like that colour skeme.Gr
eat lookin plane!Thanks a million for taking the time.I'm sure others on th
e list will agree with me.=0A=0A=0A=0A=0A________________________________
=0AFrom: "RBush96589@aol.com" <RBush96589@aol.com>=0ATo: pietenpol-list@mat
ronics.com=0ASent: Tuesday, January 6, 2009 1:39:03 PM=0ASubject: Pietenpol
-List: finished product=0A=0AHarvey ,=0A--- here is a picture of the
finished product. I would send more but out here in the country i am still
on dial up and it takes forever to send a picture.=0A=0Ado not archive-
-------------------------
-------------------------
-------------------------
-------------------------
-------- Randy Bush=0A=0A=0A=0A=0A_________________________
_______=0ANew year...new news. Be tholcom00000026">headlines.
Message 9
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Corvair College # 13 |
Just out of curiosity how many of us Piet builders are attending corvair college
#13?
Corvair College # 13 is now less than 2 weeks away!
For those of you that are in the Washington area, who are flying down commercial
and are some what less than interested in trying to "carry on" your engine &
parts; I am still willing to bring them down with me.
There is no charge for this service, I am going that way anyway. :)
I only say that because someone asked. :)
you must however bring it to me before hand :)
You can call me @ 1-866-606-4152
Or see my website for an address
I will be busy in the shop so If I don't answer just leave a message & I will return
your call during a break.
--------
Brady McCormick
Poulsbo, WA
www.magnificentmachine.com
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=223181#223181
Message 10
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Corvair College # 13 |
I'm ONE!
Gary Boothe
Cool, Ca.
Pietenpol
WW Corvair Conversion
Tail done, working on fuselage (endless metal parts!)
(12 ribs down.)
_____
From: owner-pietenpol-list-server@matronics.com
[mailto:owner-pietenpol-list-server@matronics.com] On Behalf Of Michael
Groah
Sent: Tuesday, January 06, 2009 5:11 PM
Subject: Re: Pietenpol-List: Corvair College # 13
Just out of curiosity how many of us Piet builders are attending corvair
college #13?
Brady <brady@magnificentmachine.com> wrote:
Corvair College # 13 is now less than 2 weeks away!
For those of you that are in the Washington area, who are flying down
commercial and are some what less than interested in trying to "carry on"
your engine & parts; I am still willing to bring them down with me.
There is no charge for this service, I am going that way anyway. :)
I only say that because someone asked. :)
you must however bring it to me before hand :)
You can call me @ 1-866-606-4152
Or see my website for an address
I will be busy in the shop so If I don't answer just leave a message & I
will return your call
Message 11
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Corvair College # 13 |
Two from Independence Or. area.
Ernie Moren
Independence Or.
----- Original Message -----
From: Michael Groah
To: pietenpol-list@matronics.com
Sent: Tuesday, January 06, 2009 5:10 PM
Subject: Re: Pietenpol-List: Corvair College # 13
Just out of curiosity how many of us Piet builders are attending
corvair college #13?
Brady <brady@magnificentmachine.com> wrote:
Corvair College # 13 is now less than 2 weeks away!
For those of you that are in the Washington area, who are flying
down commercial and are some what less than interested in trying to
"carry on" your engine & parts; I am still willing to bring them down
with me.
There is no charge for this service, I am going that way anyway. :)
I only say that because someone asked. :)
you must however bring it to me before hand :)
You can call me @ 1-866-606-4152
Or see my website for an address
I will be busy in the shop so If I don't answer just leave a message
& I will return your call
Message 12
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Corvair College # 13 |
I will be coming from Colorado.
Rick
On Tue, Jan 6, 2009 at 6:10 PM, Michael Groah <dskogrover@yahoo.com> wrote:
> Just out of curiosity how many of us Piet builders are attending corvair
> college #13?
>
> *Brady <brady@magnificentmachine.com>* wrote:
>
>
> Corvair College # 13 is now less than 2 weeks away!
>
> For those of you that are in the Washington area, who are flying down
> commercial and are some what less than interested in trying to "carry on"
> your engine & parts; I am still willing to bring them down with me.
>
> There is no charge for this service, I am going that way anyway. :)
> I only say that because someone asked. :)
>
> you must however bring it to me before hand :)
>
> You can call me @ 1-866-606-4152
> Or see my website for an address
>
> I will be busy in the shop so If I don't answer just leave a message & I
> will return your call
>
> *
>
> *
>
>
--
Rick Holland
Castle Rock, Colorado
Message 13
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Corvair College # 13 |
I'm coming to CC13 and am a Piet builder too.
Jim
On Jan 6, 2009, dskogrover@yahoo.com wrote:
Just out of curiosity how many of us Piet builders are attending corvair college
#13?
Corvair College # 13 is now less than 2 weeks away!
For those of you that are in the Washington area, who are flying down commercial
and are some what less than interested in trying to "carry on" your engine &
parts; I am still willing to bring them down with me.
There is no charge for this service, I am going that way anyway. :)
I only say that because someone asked. :)
you must however bring it to me before hand :)
You can call me @ 1-866-606-4152
Or see my website for an address
I will be busy in the shop so If I don't answer just leave a message & I will return
your call
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|